Oil Palm Fibre Reinforced Phenol Formaldehyde Composites: Influence of Fibre Surface Modifications on the Mechanical Performance

Oil palm fibres have been used as reinforcement in phenol formaldehyde resin. In order to improve the interfacial properties, the fibres were subjected to different chemical modifications such as mercerisation, acrylonitrile grafting, acrylation, latex coating, permanganate treatment, acetylation, and peroxide treatment. The effect of fibre coating on the interface properties has also been investigated. Morphological and structural changes of the fibres were investigated using scanning electron microscopy and IR spectroscopy. Mechanical properties of untreated and treated fibres were studied. Changes in stress–strain characteristics, tensile strength, tensile modulus and elongation at break of the fibres upon various modifications were studied and compared. The incorporation of the modified fibres resulted in composites having excellent impact resistance. Fibre coating enhanced the impact strength of untreated composite by a factor of four. Tensile and flexural performance of the composites were also investigated. Finally, inorder to have an insight into the failure behaviour, the tensile and impact fracture surfaces of the composites were analysed using scanning electron microscope.     

Antioxidant and Antibacterial Effects of Potential Probiotics Isolated from Korean Fermented Foods

A total of sixteen bacterial strains were isolated and identified from the fourteen types of Korean fermented foods that were evaluated for their in vitro probiotic potentials. The results showed the highest survivability for Bacillus sp. compared to Lactobacillus sp. in simulated gastric pH, and it was found to be maximum for B. inaquosorum KNUAS016 (8.25 ± 0.08 log10 CFU/mL) and minimum for L. sakei KNUAS019 (0.8 ± 0.02 log10 CFU/mL) at 3 h of incubation. Furthermore, B. inaquosorum KNUAS016 and L. brevis KNUAS017 also had the highest survival rates of 6.86 ± 0.02 and 5.37 ± 0.01 log10 CFU/mL, respectively, in a simulated intestinal fluid condition at 4 h of incubation. The percentage of autoaggregation at 6 h for L. sakei KNUAS019 (66.55 ± 0.33%), B. tequilensis KNUAS015 (64.56 ± 0.14%), and B. inaquosorum KNUAS016 (61.63 ± 0.19%) was >60%, whereas it was lower for L. brevis KNUAS017 (29.98 ± 0.09%). Additionally, B. subtilis KNUAS003 showed higher coaggregation at 63.84 ± 0.19% while B. proteolyticus KNUAS001 found at 30.02 ± 0.33%. Among them, Lactobacillus sp. showed the best non-hemolytic activity. The highest DPPH and ABTS radical scavenging activity was observed in L. sakei KNUAS019 (58.25% and 71.88%). The cell-free supernatant of Lactobacillus sp. considerably inhibited pathogenic growth, while the cell-free supernatant of Bacillus sp. was moderately inhibited when incubated for 24 h. However, the overall results found that B. subtilis KNUAS003, B. proteolyticus KNUAS012, L. brevis KNUAS017, L. graminis KNUAS018, and L. sakei KNUAS019 were recognized as potential probiotics through different functional and toxicity assessments.     

Experimental analysis of a two‐axis tracking system for solar parabolic dish collector

In this paper, an attempt has been made to develop a two‐axis tracking system for solar parabolic dish concentrator and experimentally evaluated the performance of the tracking system. In this proposed design, the sensor design uses the illumination produced by the convex lens on the apex of a pyramid to align the dish in‐line with the sun. The change in incident angle of the solar rays on the lens surface shifts the area of illumination from the apex of the pyramid towards its faces. Photodiodes placed on the faces of the pyramid are used as the sensitive elements to detect the movement of the sun. The sensor output is fed to a microcontroller‐based system to drive the stepper motor on the basis of the programmed algorithm such that it receives normal incidence of sunlight on the sensor. To evaluate the performance of the proposed system, a conventional available 1‐W photovoltaic (PV) panel is placed at the focal point to measure the short circuit current and open circuit voltage. With respect to the conventional solar PV panel, it is observed that the positioning accuracy of the proposed tracking system enhances the short circuit current of 0.11 A by 86%. Thus, the proposed tracking system can be used in a stand‐alone parabolic dish with concentrating PV module as the focal point for further studies.     

Carbon capture and storage using coal fly ash with flue gas

Clean Technologies and Environmental Policy - Rising CO2 emissions call for actions to urgently address climate change and its impacts. To avoid the harmful consequences of climate change, limiting...     

Scheduling bursts in time-domain wavelength interleaved networks

A time-domain wavelength interleaved network (TWIN) (Widjaja, I. et al., IEEE Commun. Mag., vol.41, 2003) is an optical network with an ultrafast tunable laser and a fixed receiver at each node. We consider the problem of scheduling bursts of data in a TWIN. Due to the high data rates employed on the optical links, the burst transmissions typically last for very short times compared with the round trip propagation times between source-destination pairs. A good schedule should ensure that: 1) there are no transmit/receive conflicts; 2) propagation delays are observed; 3) throughput is maximized (schedule length is minimized). We formulate the scheduling problem with periodic demand as a generalization of the well-known crossbar switch scheduling. We prove that even in the presence of propagation delays, there exist a class of computationally viable scheduling algorithms which asymptotically achieve the maximum throughput obtainable without propagation delays. We also show that any schedule can be rearranged to achieve a factor-two approximation of the maximum throughput even without asymptotic limits. However, the delay/throughput performance of these schedules is limited in practice. We consequently propose a scheduling algorithm that exhibits near optimal (on average within /spl sim/7% of optimum) delay/throughput performance in realistic network examples.     

Synthesis, Characterization, and Evaluation of Mesoporous MCM-41-supported Molybdenum Hydrotreating Catalysts

Mesoporous MCM-41 material with high surface area and narrow pore size distribution was synthesized and used as a support for Mo, CoMo, and NiMo catalysts. The molybdenum loading was varied from 2-14 wt% on MCM-41. On 10 wt% Mo/MCM-41, the promoter Co or Ni concentration was varied from 1-5 wt%. All the catalyst samples were characterized by surface area, low temperature oxygen chemisorption, x-ray diffraction (XRD), and temperature programmed reduction methods. Characterization results show that Mo is well dispersed on MCM-41 up to 10 wt%. The catalytic activities were evaluated for thiophene hydrodesulphurization (HDS), cyclohexene hydrogenation (HYD), and furan hydrodeoxygenation (HDO). All three catalytic functionalities vary in a similar manner to that of oxygen chemisorption as a function of Mo loading, indicating that there is a correlation between oxygen uptake and catalytic sites. The activities of these catalysts were compared with γ-Al₂O₃- and amorphous SiO₂-supported catalysts. It was found that MCM-41-supported Mo catalysts displayed superior activities.     

CREW: Cost and Reliability aware Eagle-Whale optimiser for service placement in Fog

Integration of Internet of Things (IoT) with industries revamps the traditional ways in which industries work. Fog computing extends Cloud services to the vicinity of end users. Fog reduces delays induced by communication with the distant clouds in IoT environments. The resource constrained nature of Fog computing nodes demands an efficient placement policy for deploying applications, or their services. The distributed and heterogeneous features of Fog environments deem it imperative to consider the reliability performance parameter in placement decisions to provide services without interruptions. Increasing reliability leads to an increase in the cost. In this article, we propose a service placement policy which addresses the conflicting criteria of service reliability and monetary cost. A multiobjective optimisation problem is formulated and a novel placement policy, Cost and Reliability-aware Eagle-Whale (CREW), is proposed to provide placement decisions ensuring timely service responses. Considering the exponentially large solution space, CREW adopts Eagle strategy based multi-Whale optimisation for taking placement decisions. We have considered real time microservice applications for validating our approaches, and CREW has been experimentally shown to outperform the existing popular multiobjective meta-heuristics such as NSGA-II and MOWOA based placement strategies.     

Multi-virtual wireless mesh networks through multiple channels and interfaces

Wireless Networks - The high flexibility of the wireless mesh networks (WMNs) physical infrastructure can be exploited to provide communication with different technologies and support for a variety...     

A generalized analysis on material invariant characteristics for microwave heating of slabs

A generalized dimensionless formulation has been developed to predict the spatial distribution of microwave power and temperature. The ‘dimensionless analysis’ is mainly based on three numbers: wave number, ; free space wave number, ; and penetration number, , where is the ratio of sample thickness to wavelength of microwaves within a material, is based on wavelength within free space and is the ratio of sample thickness to penetration depth. The material dielectric properties and sample thicknesses form the basis of these dimensionless numbers. The volumetric heat source due to microwaves can be expressed as a combination of dimensionless numbers and electric field distributions. The spatial distributions of microwave power for uniform plane waves can be obtained from the combination of transmitted and reflected waves within a material. Microwave heating characteristics are obtained by solving energy balance equations where the dimensionless temperature is scaled with respect to incident microwave intensity. The generalized trends of microwave power absorption are illustrated via average power plots as a function of , and . The average power contours exhibit oscillatory behavior with corresponding to smaller for smaller values of . The spatial distributions of dimensionless electric fields and power are obtained for various and . The spatial resonance or maxima on microwave power is represented by zero phase difference between transmitted and reflected waves. It is observed that the number of spatial resonances increases with for smaller regimes whereas the spatial power follows the exponential decay law for higher regimes irrespective of and . These trends are observed for samples incident with microwaves at one face and both the faces. The heating characteristics are shown for various materials and generalized heating patterns are shown as functions of , and . The generalized heating characteristics involve either spatial temperature distributions or uniform temperature profiles based on both thermal parameters and dimensionless numbers ().     

Transport of styrene monomer through natural rubber

The diffusion and transport of inhibitor-free styrene through crosslinked natural rubber (NR) have been studied at various temperatures. NR has been vulcanized by conventional, efficient, peroxide and mixed vulcanization techniques. The dependence of diffusion coefficient on the crosslinking system has been studied for all the systems. The influence of temperature on the sorption and the activation energies of sorption have been calculated. The interaction parameter, permeability, sorption coefficient and molecular weight between crosslinks have been evaluated using the diffusion data. The effect of degree of crosslinking on the sorption characteristics of styrene through NR has also been investigated for the different crosslinking systems. The peroxide system showed lowest uptake and the conventional system showed highest uptake.