Ti:sapphire laser cavity mode and pump-laser mode calculations

Comprehensive calculations of the cavity mode size throughout a Ti:sapphire laser, made with the ABCD Gaussian beam formalism are reported. These calculations show that the beam is not collimated, in general, in what are normally referred to as the collimated arms of the laser cavity. Additionally, the mode size and volume (in the gain medium) of the argon-ion laser, which is used to pump the Ti:sapphire laser optically, are evaluated for different focusing geometries, and graphs that can be used to select suitable mode-matching optics are produced. It is concluded that an appropriate strategy for mode matching the pump beam to the Ti:sapphire laser mode is to use a zoom telescope to tailor the collimated pump-laser beam diameter to an optimum value. Finally, comparisons of the pump-laser mode and the Ti:sapphire laser mode are presented for selected pumping geometries.     

Asymmetric optical loop mirror: analysis of an all-optical switch

We present an analysis of the optical loop mirror in which a nonlinear optical element is asymmetrically placed in the loop. This analysis provides a general framework for the operation of a recently invented ultrafast all-optical switch known as the terahertz optical asymmetric demultiplexer. We show that a loop with small asymmetry, such as that used in the terahertz optical asymmetric demultiplexer, permits low-power ultrafast all-optical sampling and demultiplexing to be performed with a relatively slow optical nonlinearity. The size of the loop is completely irrelevant to switch operation as long as the required degree of asymmetry is accommodated. This is therefore the first low-power ultrafast all-optical switch that can be integrated on a single substrate.     

Interpretation and topographic compensation of conifer canopy self-shadowing

The self-shadowing of conifer canopies results from the size and arrangement of trees within a stand and is a first-order term controlling radiance from forested terrain at common pixel scales of tens of meters. Although self-shadowing is a useful attribute for forest remote-sensing classification, compensation for the topographic effects of self-shadowing has proven problematic. This study used airborne canopy LiDAR measurements of 80 Pacific Northwest, USA conifer stands ranging in development stage from pre-canopy closure to old-growth in order to model canopy self-shadowing for four solar zenith angles (SZA). The shadow data were compared to physical measurements used to characterize forest stands, and were also used to test and improve terrain compensation models for remotely sensed images of forested terrain. Canopy self-shadowing on flat terrain strongly correlates with the canopy's geometric complexity as measured by the rumple index (canopy surface area/ground surface area) (R² = 0.94–0.87 depending on SZA), but is less correlated with other stand measurements: 95th percentile canopy height (R² = 0.68), mean diameter at breast height (dbh) (R² = 0.65), basal area ha^? 1 (R² = 0.18), and canopy stem count ha^? 1 (R² = 0.18). The results in this paper support interpretation of self-shadowing as a function of canopy complexity, which is an important ecological characteristic in its own right. Modeling of canopy self-shadowing was used to assess the accuracy of the Sun-Canopy-Sensor (SCS) topographic correction, and to develop a new empirical Adaptive Shade Compensation (ASC) topographic compensation model. ASC used measured shadow (as an estimate of canopy complexity) and the SCS term (to describe the illumination geometry) as independent variables in multiple regressions to determine the topographic correction. The ASC model provided more accurate radiance corrections with limited variation in results across the full range of canopy complexities and incidence angles.     

Vision models fine-tuned by cinema professionals for High Dynamic Range imaging in movies

Multimedia Tools and Applications - Many challenges that deal with processing of HDR material remain very much open for the film industry, whose extremely demanding quality standards are not met by...     

Evaluation of imperfections in silica and chalcogenide glass microspheres using focussed ion beam milling and imaging

Microspheres made from optical glasses such as silica and chalcogenide are used as both passive and active optical elements in micro-optics systems and devices. The homogeneity of the microspheres is crucial to their optical quality and performance in such devices and so it is essential, in optimizing such systems, that techniques with nanometer scale resolution are developed to measure the internal structure and homogeneity of such spheres. In this work an analytical protocol based on focussed ion beam milling, combined with secondary ion and secondary electron imaging, has been developed to study the internal homogeneity of glass microspheres. The results have shown that silica microspheres with diameters of three to five microns, fabricated by a sol-gel method, have internal inhomogeneities and voids that will lead to non-uniform optical properties. The FIB milling and imaging technique developed has been found to be a very useful method of studying such inhomogeneities, which have been proposed, but never previously observed, in glass microspheres. The FIB based technique has also been used on larger chalcogenide glass (Ga(2)S(3):La(2)S(3)) microspheres (diameter of order 70 microns) but no inhomogeneities have been observed at the spatial resolution of a few microns so far achieved for these larger microspheres. This study suggests that the FIB based milling and imaging technique may have potential for quantitative use in the measurement of morphological variations in such systems as well as in the study of aging processes in micron-sized glass spheres.     

香车美机 Audi Mobile Device

在东京车展上,奥迪不仅展示了新车型A1,同时还推出了一款配合A1使用的专用导航手机——Audi Mobile Device,该机将在汽车销售时赠送给消费者。这款奥迪自家品牌的手机采用触控操作方式,支持3G,Wi-Fi和GPS,奥迪A1上专门设计了放置手机的插槽.并可通过汽车内置的车载充电器为手机充电。当你忘记带车钥匙时,通过手机可以打开A1的车门.也能用来开启汽车空调,音频/视频播放     

Nonparametric multiple-comparison methods for simply ordered medians

Recently, several multiple-comparison procedures for a simple order have been proposed. Most of these procedures are developed under the usual normality and equality-of-variances assumptions. In many applications, however, these assumptions may not be satisfied. For nonnormal data, two types of relatively simple nonparametric multiple-comparison methods for a simple order are proposed. The first is a rank-based method, which traces its roots to the one-sided Studentized-range test by Hayter, and the other is a two-stage method, which conducts the global test by Chacko, followed by one-sided pairwise tests. A simulation shows that the proposed procedures perform reasonably well with normal data, and that they are far superior to the parametric counterparts when data arise from a heavy-tailed distribution, such as Cauchy.     

Conforming boundary elements in plane elasticity for shape design sensitivity

The structural design sensitivity analysis of a two-dimensional continuum using conforming (continuous) boundary elements is investigated. Implicit differentiation of the discretized boundary integral equations is performed to obtain design sensitivities in an efficient manner by avoiding the factorization of the perturbed matrices. A singular formulation of the boundary element method is used. Implicit differentiation of the boundary integral equations produces terms that contain derivatives of the fundamental solutions employed in the analysis. The behaviour of the singularity of these derivatives of the boundary element kernel functions with respect to the design variables is investigated. A rigid body motion technique is presented to obtain the singular terms in the resulting sensitivity matrices, thus avoiding the problems associated with their numerical integration. A formulation for obtaining the design sensitivities of the continua under body forces of the gravitational and centrifugal types is also presented. The design sensitivity results are seen to be of the same order of accuracy as the boundary element analysis results. Numerical data comparing the performance of conforming and non-conforming formulations in the calculation of design sensitivities are also presented. The accuracy of the present results is demonstrated through comparisons with existing analytical results.