Preparation and characterization of a composite nanofiltration membrane interfacially polymerized from cis,cis‐1,3,5‐triaminocyclohexane and trimesoyl chloride

cis,cis‐1,3,5‐Triaminocyclohexane (TAC) was synthesized and used to prepare composite nanofiltration (NF) membranes by interfacial polymerization with trimesoyl chloride (TMC). The surface elemental composition, morphology, and hydrophilicity of the prepared NF membranes were characterized. The separation performances were examined with various salts and polyethylene glycol (PEG400, PEG600) solutions. The effects of preparation conditions were also systematically studied. The NF membrane was negatively charged and exhibited a salt rejection in the order Na₂SO₄ (98.2%) > MgSO₄ (90.8%) > MgCl₂ (84.5%) > NaCl (54.6%). The water permeability was 1.56 L m^?2 h^?1 bar^?1, and the molecular weight cutoff was 600 Da. The TAC/TMC membrane exhibited some characteristics that were different from the ones made from common diamines such as m‐phenylenediamine: (1) the surface was smoother, without a ridge‐and‐valley structure; (2) there were two kinds of crosslinking points in the polyamide chains; (3) the active layer was formed faster (only 5 seconds was required to reach a Na₂SO₄ rejection of 98%). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43511.     

Theranostic Polyaminocarboxylate–Cyanine–Transferrin Conjugate for Anticancer Therapy and Near‐Infrared Optical Imaging

Iron chelation therapy has been recognized as a promising antitumor therapeutic strategy. Herein we report a novel theranostic agent for targeted iron chelation therapy and near‐infrared (NIR) optical imaging of cancers. The theranostic agent was prepared by incorporation of a polyaminocarboxylate‐based cytotoxic chelating agent (N‐NE3TA; 7‐[2‐[(carboxymethyl)amino]ethyl]‐1,4,7‐triazacyclononane‐1,4‐diacetic acid) and a NIR fluorescent cyanine dye (Cy5.5) onto a tumor‐targeting transferrin (Tf). The N‐NE3TA–Tf conjugate (without Cy5.5) was characterized and evaluated for antiproliferative activity in HeLa, HT29, and PC3 cancer cells, which have elevated expression levels of the transferrin receptor (TfR). The N‐NE3TA–Tf conjugate displayed significant inhibitory activity against all three cancer cell lines. The NIR dye Cy5.5 was then incorporated into N‐NE3TA–Tf, and the resulting cytotoxic and fluorescent transferrin conjugate N‐NE3TA–Tf–Cy5.5 was shown by microscopy to enter TfR‐overexpressing cancer cells. This theranostic conjugate has potential application for dual use in targeted iron chelation cancer therapy and NIR fluorescence imaging.     

Comparison of Methanol with Formamide on Separation of Nitrogen Heterocyclic Compounds from Model Coal Tar Fraction by Batch Cocurrent Multistage Equilibrium Extraction

The separation of nitrogen heterocyclic compounds (NHC) contained in a model coal tar fraction comprising four kinds of NHC [indole (In), quinoline (Q), iso-quinoline (iQ), quinaldine (Qu)], three kinds of bicyclic aromatic compound (BAC) [1-methylnaphthalene (1MN), 2-methylnaphthalene (2MN), dimethylnaphthalene (DMN) mixture with ten structural isomers (DMNs; regarded as one component)], biphenyl (Bp), and phenyl ether (Pe) was examined by batch cocurrent three stages equilibrium extraction. The model coal tar fraction used as a raw material in this work was prepared according to the components and compositions contained in coal tar fraction (distilled temperature ranges: 240–265°C). An aqueous solution of formamide and that of methanol were used as solvent, respectively. The distribution coefficient of the entire NHC (NHCs) summed four kinds of NHC was much larger than that of the entire BAC (BACs) summed three kinds of BAC, Bp, and Pe. Irrespective of solvent used in this work, the NHCs was recovered more than 90% through three stages of the equilibrium extraction. The selectivity of NHCs based on BACs obtained through the 3 stages equilibrium extraction using an aqueous solution of formamide was higher 3.6–8 times than that using an aqueous solution of methanol. Furthermore, we investigated the recovery process of NHCs contained in coal tar fraction using the formamide experimental results obtained from this work.     

Polydimethylsiloxane Fluidic Device with Polydopamine‐Coated Inner Channel for Production of Uniform Droplets

A polydimethylsiloxane (PDMS)‐based fluidic device with two flow channels is fabricated by using a rapid prototyping method. The PDMS‐based fluidic device is used to produce water‐in‐oil emulsion (W/O) droplets due to its intrinsic hydrophobicity. To produce uniform oil‐in‐water (O/W) emulsion droplets, the inner channel of the PDMS fluidic device is coated with polydopamine (PDA) by flowing a dopamine precursor in the water channel of the fluidic device. The PDA coating is confirmed by an increase in morphological roughness and nitrogen content. In addition, the contact angle of the PDMS surface decreases from 95° to 30° during PDA coating, suggesting that the inner surface of the fluidic device is hydrophilic. Uniform W/O and O/W emulsion droplets are produced by the pristine PDMS and PDA‐coated PDMS fluidic devices, respectively.

     

电容传感器线性度标定平台

设计了一种电容位移传感器在线标定平台,用于位移的高精度调节和检测。该平台的运动对称中心轴、测量光路的对称中心轴和传感器的传感轴共轴,故从测量原理上减小了阿贝误差。标定平台具有z/tip/tilt调节功能,保证了传感器的传感面和被测面板的被测面之间的装调对准。介绍了标定平台的组成和标定方法的原理,采用对称平行四边形机构实现了微位移调节,基于柔度矩阵法(CMM)分析了导向机构的输出柔度和行程。试验测得动平台行程为735.162μm,和有限元法(FEM)、CMM计算结果的误差分别为7.410%和4.633%,满足行程误差要求。经过标定补偿后,传感器的线性度由0.014 21%提高至0.006 231%。实验结果显示,该线性度标定方法精度高,标定后的传感器满足位移精密调节机构使用要求。     

Influence of Particle Velocity of Copper on Emitter Contact by Cold-Spray Method

In this study, we investigated cold-sprayed copper as a front contact for crystalline silicon solar cells. Copper powder was deposited on a monocrystalline silicon wafer with variation of the particle velocity during deposition. The particle velocity was varied by varying the heating temperature from 250 to 400 °C using a gas pressure of 0.45 MPa. The particle velocities were calculated using empirical equations, and were found to increase with an increase in the carrier gas temperature. Grid patterns were formed on a phosphorus-doped n-type emitter of a p-type silicon substrate. The electrode thickness increased with increasing particle velocity. The electrical properties of the grids were evaluated using the transfer length method. The specific contact resistance of the n-type emitter was in the range of 2.6-26.4 mΩ-cm². Damage to the p-n junction was investigated via minority carrier lifetime measurement of the substrate. The copper-silicon interface was evaluated using transmission electron microscopy. The contact properties were affected by the interface conditions.     

Disassembly leveling and lot sizing for multiple product types: a basic model and its extension

We consider two interrelated problems that occurred in disassembly systems: disassembly leveling and lot sizing. Disassembly leveling, one of disassembly process planning decisions, is to determine disassembly structures that specify parts and/or subassemblies to be obtained from disassembling used/end-of-life products, and disassembly lot sizing is the problem of determining the amounts of disassembly operations required to satisfy the demands of their parts and/or subassemblies. Unlike the existing studies, this study considers the two problems at the same time for the objective of minimizing the sum of disassembly setup and operation costs. In particular, we consider a generalized version in which disassembly levels may be different even for products of the same type. Two types of the problem are considered in this study. The first one is the basic problem without parts commonality, i.e., products do not share their parts or subassemblies, for which a polynomial time optimal algorithm is suggested after developing a mathematical programming model. The second one is an extended problem with parts commonality. After developing another mathematical programming model for the extension, we prove that it is NP hard. Then, a heuristic algorithm is suggested together with its computational results.