Haemosuccus pancreaticus as a rare initial manifestation of chronic pancreatitis

Twenty-seven painful knee replacements were evaluated arthroscopically. The diagnostic and therapeutic value of these arthroscopic procedures was studied retrospectively. In 5 of the 27 cases, the arthroscopy revealed no diagnosis for the pain. Some form of arthroscopic treatment was performed in 20 cases; in 6 of these 20 cases, however, the treatment did not reduce the pain. Based on these findings, we conclude that the indications for arthroscopic evaluation and treatment of painful knee prostheses are limited.     

Sites of alcohol and volatile anaesthetic action on GABA(A) and glycine receptors

Volatile anaesthetics have historically been considered to act in a nonspecific manner on the central nervous system. More recent studies, however, have revealed that the receptors for inhibitory neurotransmitters such as gamma-aminobutyric acid (GABA) and glycine are sensitive to clinically relevant concentrations of inhaled anaesthetics. The function of GABA(A) and glycine receptors is enhanced by a number of anaesthetics and alcohols, whereas activity of the related GABA rho1 receptor is reduced. We have used this difference in pharmacology to investigate the molecular basis for modulation of these receptors by anaesthetics and alcohols. By using chimaeric receptor constructs, we have identified a region of 45 amino-acid residues that is both necessary and sufficient for the enhancement of receptor function. Within this region, two specific amino-acid residues in transmembrane domains 2 and 3 are critical for allosteric modulation of both GABA(A) and glycine receptors by alcohols and two volatile anaesthetics. These observations support the idea that anaesthetics exert a specific effect on these ion-channel proteins, and allow for the future testing of specific hypotheses of the action of anaesthetics.     

Capillary and slit flow behavior of concentrated solutions of a rod-like polymer

This paper is concerned with the flow behavior of isotropic solutions of the rod-like polymer, poly(p-phenyleneterephthalamide) (PPT), in 100 percent sulfuric acid. Studies include entry flow visualization in a slit die and solution fracture, and die swell in capillaries and a slit die. It was observed that solutions of PPT exhibit nearly negligible die swell, a slip-stick type of fracture that disappears at high shear rates, and radial entry flow patterns similar to Newtonian fluids. Fracture was associated with the plateau in the shear stress vs shear rate curve. Because values of the wall shear stress (τ_w.) obtained from capillary measurements were in good agreement with those obtained from a cone-and-plate rheometer and values of the loss modulus (G″) obtained from small-strain dynamic oscillatory measurements, it is believed that the rheological properties lead to the flow instability. These results are in agreement with the predictions of a recent theory by Doi and Edwards for concentrated solutions of rod-like molecules. Data are also presented for a flexible chain polyamide, nylon 6,6, in 100 percent H₂SO₄ for the purpose of comparing the flow characteristics of rigid and flexible chain polymers.     

Chemical characterization of the mutagenic neutral aromatic polar fractions of petroleum substitutes

The constituents of the neutral aromatic polar subfractions of two coal-derived oils, a shale-derived oil and a petroleum oil were analysed and compared. Chemical ionization mass spectra, using methanol and ammonia as reagent gases, were used to characterize the oxygen-and nitrogen-containing constituents, respectively. The compositions of the petroleum substitutes were found to differ from those of petroleum in containing primary polycyclic aromatic amines, azaarenes, polycyclic hydroxyaromatics and, in one case, aromatic ketones.     

An optimal maintenance policy based on generalized stochastic Petri nets and periodic inspection

Periodic maintenance of equipment is essential for its optimum performance, thereby enabling production efficiency. In the past, studies on preventive maintenance of automated manufacturing systems (AMS) determined the optimal preventive maintenance policy under different performance indexes. Generally, most hypotheses indicate that equipment reliability can be restored to 1.0 through preventive and corrective maintenance. However, in practical application, the implementation of preventive maintenance results in partial deterioration of equipment; moreover, the reliability of equipment cannot be restored to as‐good‐as‐new. In addition, the greater the complexity of connections of the equipment, the greater is the difficulty in determining the timing for preventive maintenance. On account of these characteristics, generalized stochastic Petri nets (GSPN) are well‐suited for the implementation of preventive maintenance. Therefore, this paper applies GSPN for deciding the optimal maintenance policy and constructing models for different levels of maintenance and renewal for an AMS with a serial‐parallel layout. As a result of the application of GSPN, the following optimal maintenance policy for an AMS was obtained in this study: Preventive maintenance conducted at intervals of every 240 hours will reduce cost by 46% as opposed to the practice of replacing defective parts when necessary. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Electrochemical oxidation of manganese(II) at a platinum electrode

Electrochemical oxidation of Mn²⁺ in sulphuric acid to form MnO₂ was studied using stationary and rotating platinum/platinum ring-disc electrodes. It appears that nucleation of MnO₂ is governed by an equilibrium involving a Mn(III) intermediate. Growth of MnO₂ involves the reduction of MnO₂ surfaces by Mn²⁺ ions in the solution to form MnOOH intermediates. The subsequent electrochemical oxidation of MnOOH releases a hydrogen ion and results in the formation of MnO₂. The rate constant of MnOOH oxidation to MnO₂ was estimated to be 40 s^–1. With a sufficient supply of Mn²⁺ ions, a layer of MnOOH is built up and the in-solid diffusion of hydrogen ions becomes the ratedetermining-step. With a low Mn²⁺ concentration, diffusion of Mn²⁺ ions from bulk electrolyte to the MnO₂/electrolyte interface is a factor controlling the growth of MnO₂. The activation energy and the pre-exponential term of the diffusion coefficient of Mn²⁺ in 0.5m sulphuric acid were determined to be 44.8 kJ mol^–1 and 100 cm² s^–1, respectively.     

Mesoporous silica with short-range MFI structure

A new type of mesoporous silica has been prepared which showed 780 m²/g of BET surface area and 0.6 ml/g of primary mesopores narrowly distributed around 4.2 nm. More importantly however, is that it showed short-range zeolite crystallinity as demonstrated by FTIR and XRD analysis, and hydrophobicity as demonstrated by water and n-hexane adsorption.

This material was synthesized via a dual-template, three-step hydrothermal–flocculation–steaming synthesis procedure developed by us recently. Briefly, MFI nanoprecursors (NPs) were first prepared by a low-temperature hydrothermal step using TPAOH as template for zeolite structure, and then flocculated using a surfactant that served as the template for the mesopores. The collected NPs are mesoporous silica exhibiting short-range MFI domains when directly calcined. However, the steaming step promoted the crystallization of the NPs and created uniform mesopores. It was found that almost every detail in these procedures affected the properties of the final product. The most important variables, however, were identified as the duration the flocculants were kept in contact with the liquid phase, and the humidity under which the steaming was conducted. By properly adjusting the procedures, the said mesoporous silica, as well as nanocrystals having high external surface area, could be produced at will.     

Formation and inhibition of free radicals in electrically stressed and aged insulating polymers

Previous work has shown that prebreakdown, electrical aging, and breakdown phenomena are directly associated with charge carriers injected from electrical contacts and their subsequent dissociative trapping and recombination. In addition, the energy released from each trapping or recombination event is dissipated in the breaking of the bonds of macromolecules, thus forming free radicals and new traps in the electrically stressed insulating polymers, as predicted by Kao's model. It is this gradual degradation process that leads to electrical aging and destructive breakdown. New experimental results are presented to confirm previous findings and a new approach to inhibit the degradation process by the incorporation of suitable dopants into the polymer. The concentration of free radicals in the polymer increases with an increasing electric field at a fixed stress time of 250 h and with increasing stress time at a fixed electric field of 833 kV cm^?1. The concentration of free radicals is directly related to the concentration of new traps created by stress. However, when suitable dopants are incorporated, the initiation voltage for the occurrence of electrical treeing and the breakdown strength are both increased. The dopants tend to create shallow traps and have little effect on the deep trap concentration. This implies that the dopants act as free‐radical scavengers that tend to satisfy the unpaired electrons of the broken bonds, which create new acceptor‐like electron traps and new shallow traps. By doing so, the shallow traps screen the deep traps, thereby reducing the energy released during trapping and recombination and the probability of breaking the macromolecular bonds and causing structural degradation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3416–3425, 2003     

Synergistic effects by compatibilization and annealing treatment of metallocene polyethylene/PLA blends

The properties of metallocene polyethylene (mPE)/polylactic acid (PLA) bio‐based blends containing an ethylene‐glycidyl methacrylate‐vinyl acetate (EGMA‐VA) compatibilizer, with or without the annealing effect of PLA were investigated. The results from SEM (Scanning electron microscope) morphology observation revealed that the dispersed PLA particles sizes within the mPE matrix tended to decrease with the added compatibilizer due to the enhanced interfacial interaction. DSC (Differential scanning calorimetry) and XRD (X‐ray diffractometer) results indicated that the addition of the compatibilizer completely hindered the cold crystallization and rearrangement crystallization of PLA, even though the additional annealing effect tended to increase the crystallization of PLA. Tensile test results showed the synergistic effects by compatibilization and annealing treatment improved the tensile strength and Young's modulus, up to 38 % and 62 % increase, respectively. With the incorporation of the compatibilizer, the viscosity increased and reached the highest level among all neat resins and blends, which was attributed to the enhanced interfacial interaction between mPE and PLA. Hopefully, the incorporated bio‐based PLA materials could be helpful in reducing the use of petroleum‐based materials and are beneficial to the environment in terms of the sustainable development concern. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2399–2409, 2013     

Optimization of Open-end Rotor Spinning Frame Parameter and Estimation of Relevant Quality Characteristics

The high-cleaning Lyocell fibers are used to spin the Ne 32 yarns for an open-end rotor spinning frame. The optimal processing parameters were obtained in demonstrating output speed, stretching roller speed, feed speed and rotor revolution. The quality characteristics, such as yarn count, strength, elongation and Um (%), are far beyond the rating standard of the combed yarn. No yarn breaking for continuous spinning during the experimental confirmation. The result presents lower yarn breaking rate and maintains stabilized output status of spinning conditions. The back propagation neural network was employed for learning, forecast and verification of the processing parameters.