Morphological,mechanical, and thermal characterization of biopolymer composites based on polylactide and nanographite platelets

This work focuses on development and optimization of polylactide (PLA) and nanographite platelets (NGP) based composites to display possible superior mechanical and improved thermal stability. Melt blending and dry mixing methods of fabrication were employed at temperature of 180°C. Different Loading fractions of NGP were incorporated into polymer matrix. Morphological evaluation techniques such as XRD and TEM were applied to determine the degree of dispersion of NGPs into PLA matrix. Mechanical properties were evaluated and correlated to structural morphologies of PLA/NGP composites. Thermal properties of composites were studied to examine possible changes in T_g, T_c, T_m, and percentage crystallinity of these composites. The effect of mixing was also explored through double extrusion of some samples. It was concluded that composites containing 3 wt% NGP showed optimum mechanical performance without any significant changes in the thermal characteristics. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Fabrication and Thermal Dissipation Properties of Carbon Nanofibers Derived from Electrospun Poly(Amic Acid) Carboxylate Salt Nanofibers

Polyimides (PIs) possess excellent mechanical properties, thermal stability, and chemical resistance and can be converted to carbon materials by thermal carbonization. The preparation of carbon nanomaterials by carbonizing PI‐based nanomaterials, however, has been less studied. In this work, the fabrication of PI nanofibers is investigated using electrospinning and their transformation to carbon nanofibers. Poly(amic acid) carboxylate salts (PAASs) solutions are first electrospun to form PAAS nanofibers. After the imidization and carbonization processes, PI and carbon nanofibers can then be obtained, respectively. The Raman spectra reveal that the carbon nanofibers are partially graphitized by the carbonization process. The diameters of the PI nanofibers are observed to be smaller than those of the PAAS nanofibers because of the formation of the more densely packed structures after the imidization processes; the diameters of the carbon nanofibers remain similar to those of the PI nanofibers after the carbonization process. The thermal dissipation behaviors of the PI and carbon nanofibers are also examined. The infrared images indicate that the transfer rates of thermal energy for the carbon nanofibers are higher than those for the PI nanofibers, due to the better thermal conductivity of carbon caused by the covalent sp² bonding between carbon atoms.     

Formation polarity dependent improved resistive switching memory characteristics using nanoscale (1.3 nm) core-shell IrOx nano-dots

ABSTRACT: Improved resistive switching memory characteristics by controlling the formation polarity in an IrOx/Al2O3/IrOx-ND/Al2O3/WOx/W structure have been investigated. High density of 1 × 1013/cm2 and small size of 1.3 nm in diameter of the IrOx nano-dots (NDs) have been observed by high-resolution transmission electron microscopy. The IrOx-NDs, Al2O3, and WOx layers are confirmed by X-ray photo-electron spectroscopy. Capacitance-voltage hysteresis characteristics show higher charge-trapping density in the IrOx-ND memory as compared to the pure Al2O3 devices. This suggests that the IrOx-ND device has more defect sites than that of the pure Al2O3 devices. Stable resistive switching characteristics under positive formation polarity on the IrOx electrode are observed, and the conducting filament is controlled by oxygen ion migration toward the Al2O3/IrOx top electrode interface. The switching mechanism is explained schematically based on our resistive switching parameters. The resistive switching random access memory (ReRAM) devices under positive formation polarity have an applicable resistance ratio of > 10 after extrapolation of 10 years data retention at 85°C and a long read endurance of 105 cycles. A large memory size of > 60 Tbit/sq in. can be realized in future for ReRAM device application. This study is not only important for improving the resistive switching memory performance but also help design other nanoscale high-density nonvolatile memory in future.     

Oral Rg1 supplementation strengthens antioxidant defense system against exercise-induced oxidative stress in rat skeletal muscles

ABSTRACT: BACKGROUND: Previous studies reported divergent results on nutraceutical actions and free radical scavenging capability of ginseng extracts. Variations in ginsenoside profile of ginseng due to different soil and cultivating season may contribute to the inconsistency. To circumvent this drawback, we assessed the effect of major ginsenoside-Rg1 (Rg1) on skeletal muscle antioxidant defense system against exhaustive exercise-induced oxidative stress. METHODS: Forty weight-matched rats were evenly divided into control (N = 20) and Rg1 (N = 20) groups. Rg1 was orally administered at the dose of 0.1 mg/kg bodyweight per day for 10- week. After this long-term Rg1 administration, ten rats from each group performed an exhaustive swimming, and remaining rats considered as non-exercise control. Tibialis anterior (TA) muscles were surgically collected immediately after exercise along with nonexercise rats. RESULTS: Exhaustive exercise significantly (p <0.05) increased the lipid peroxidation of control group, evidenced by elevated malondialdehyde (MDA) levels. The increased oxidative stress after exercise was also confirmed by decreased reduced glutathione to oxidized glutathione ratio (GSH/GSSG ratio) in control rats. However, these changes were completely eliminated in Rg1 group. Catalase (CAT) and glutathione peroxidase (GPx) activities were significantly (p <0.05) increased by Rg1 in non-exercise rats, while no significant change after exercise. Nevertheless, glutathione reductase (GR) and glutathione S-transferase (GST) activities were significantly increased after exercise in Rg1 group. CONCLUSIONS: This study provide compelling evidences that Rg1 supplementation can strengthen antioxidant defense system in skeletal muscle and completely attenuate the membrane lipid peroxidation induced by exhaustive exercise. Our findings suggest that Rg1 can use as a nutraceutical supplement to buffer the exhaustive exercise-induced oxidative stress.     

Influence of Y-doped induced defects on the optical and magnetic properties of ZnO nanorod arrays prepared by low-temperature hydrothermal process

ABSTRACT: One-dimensional pure zinc oxide (ZnO) and Y-doped ZnO nanorod arrays have been successfully fabricated on the silicon substrate for comparison by a simple hydrothermal process at the low temperature of 90°C. The Y-doped nanorods exhibit the same c-axis-oriented wurtzite hexagonal structure as pure ZnO nanorods. Based on the results of photoluminescence, an enhancement of defect-induced green-yellow visible emission is observed for the Y-doped ZnO nanorods. The decrease of E2(H) mode intensity and increase of E1(LO) mode intensity examined by the Raman spectrum also indicate the increase of defects for the Y-doped ZnO nanorods. As compared to pure ZnO nanorods, Y-doped ZnO nanorods show a remarked increase of saturation magnetization. The combination of visible photoluminescence and ferromagnetism measurement results indicates the increase of oxygen defects due to the Y doping which plays a crucial role in the optical and magnetic performances of the ZnO nanorods.     

Experimental study of the burner for FAA fire test: NexGen burner

The NexGen (Sonic) burner is the new burner developed by the Federal Aviation Administration, FAA, to replace old oil burners used for the required fire certification tests on power plant‐related materials, as it provides the capability to control both air and fuel flow rates. During a fire test, the burner is supposed to simulate a certain fire condition, so the flame properties should be robust and repeatable. The NexGen burner can achieve this due to the precise fuel and air controls. However, the current calibration criterion (ISO2685:1998 and AC20‐135) may not be good enough to ensure consistent flame properties. In the presented work, the sensitivity of the burner performance to air and fuel flow rate, as measured by the temperature and heat flux for calibration purposes, was studied. Additionally, the influence of the turbulator and the thermocouple size used for flame calibration was also studied. The impact of varying fuel/air ratio and thermocouple sizes was studied by conducting fire tests on aluminum samples, to show the inadequacies in the current calibration standards.     

A study on surface polishing of SiC with a tribochemical reaction mechanism

This work investigates the surface polishing of silicon carbide SiC using the tribochemical reaction mechanism. Different metal discs – cast iron, AISI 304 stainless steel, S45C medium carbon steel plated chromium, brass and copper – are used to polish SiC in water and kerosene, respectively. The experimental results show that ferrous metal discs can effectively polish SiC in water. Also, no surface damage or scratches on the polished surface of SiC are observed by this method. The polishing debris was analyzed by electron spectroscopy for chemical analysis. The analyzed results indicate that the polishing surface of SiC is removed tribochemically with the aid of catalytic effect of iron oxide. Moreover, in this process the maximum material removal rate is about 0.06 m/h.     

Electrochemical passive properties of AlxCoCrFeNi (x = 0, 0.25, 0.50, 1.00) alloys in sulfuric acids

This study investigates the electrochemical passive properties of Al_xCoCrFeNi alloys in H₂SO₄ by potentiodynamic polarization, EIS, and weight loss tests from 20 to 65 °C. Experimental results indicate that Al harms the corrosion resistance in H₂SO₄ at temperatures exceeding 27 °C owing to the porous and inferior nature of the protection oxide film of Al in these alloys. Closely examining the Arrhenius plots of corrosion current density reveals that both pre-exponential factor A and activation energy E_a increase with Al content. However, A affects corrosion current density more significantly than E_a at higher temperatures and, conversely, at lower temperatures.     

分解炉循环喂料与物料停留时间分布的关系

:通过对外循环反应器的物料停留时间分布的研究 ,分析了带Pyrotop的分解炉内物料的循环比对物料平均停留时间的影响 ,为工厂的实际操作提供了理论根据     

IDENTIFIABILITY AND DISTINGUISHABILITY TESTING FOR LINEAR MODELS IN HETEROGENEOUS CATALYSIS

If several values of the parameters of a model are associated with the same behavior, then the model is not identifiable and there is no hope of estimating a unique best value for the parameter vector from experimental data. Similarly, if several models with different structures correspond to the same behavior, then these models are not distinguishable and there is no hope of selecting a structure that best corresponds to the experimental data. Two methods for testing linear models for identifiability and distinguish ability are recalled and applied to types of catenary compartmental models encountered for instance when studying the isobutane-isobutene-hydrogen system by transient isotopic tracing.