Radiation-induced oxidative degradation of isotactic polypropylene

Gas evolution, oxygen consumption, and change of mechanical properties were studied for the γ-ray irradiation of isotactic polypropylene from ⁶⁰Co under various conditions, such as vacuum, air, and oxygen at room temperature. For irradiation under vacuum, G(H₂) = 2.9 and G (CH₄) = 0.09; the G values for other gases were very small. In the presence of oxygen, G(H₂) was the same, and the G values for other hydrocarbons were two times those under vacuum. The G values of oxidative products and oxygen consumption were G(CO₂) = 2.5, G(CO) = 1.1, and G(O₂) = 50 at oxygen pressure of 500 torr and were dependent on oxygen pressure. With irradiation under vacuum at 2–3 Mrad, mechanical properties scarcely changes immediately after irradiation but degrade gradually with storage time in air at room temperature.     

Acquisition of optimal attribute subset through genetic algorithm using GNP‐based class association rule mining

Attribute selection is a technique to prune less relevant information and discover high‐quality knowledge. It is especially useful for the classification of a large database, because the preprocessing of data increases the possibility that predictor attributes given to the mining algorithm become more relevant to the class attribute. In this paper, a method to acquire the optimal attribute subset for the genetic network programming (GNP) based class association rule mining has been proposed, and this attribute selection process using genetic algorithm (GA) leads to a higher accuracy for classification. Class association rule mining through GNP is conducted with a small subset of data rather than the original large number of attributes; thus simple but important rules are obtained for classification while the local optimal problem is avoided. Simulation results with educational data show that the classification accuracy is largely improved from 52.73 to 74.54%, when classification is made using the optimal attribute subset. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Growth of InGaN self-assembled quantum dots and their applicationto lasers

We have successfully grown InGaN self assembled quantum dots (QD's) on a GaN layer, using atmospheric-pressure metalorganic chemical vapor deposition (MOCVD). The average diameter of the QD's was as small as 8.4 nm, and strong emission from the QD's was observed at room temperature. Next, we have investigated a structure in which InGaN QD's were stacked to increase the total QD density. InGaN QD's were formed even when the number of stacked layers was ten. As the number of layers increased, the photoluminescence (PL) intensity increased drastically. Moreover, we have fabricated a laser structure with InGaN QD's embedded into the active layer. A clear threshold of 6.0 mJ/cm² was observed in the dependence of the emission intensity on the excitation energy at room temperature under optical excitation. Above the threshold, the emission was strongly polarized in the transverse electric (TE) mode, and the linewidth of the emission spectra was reduced to below 0.1 nm (resolution limit). The peak wavelength was around 405 nm. These results indicate lasing action at room temperature     

Technology interaction of Electrical Engineering

The paper reviews the global activities of the Technical Committee for History of Electrical Engineering (HEE) in Institute of Electrical Engineers of Japan (IEEJ) to discuss its future activities. Introducing HEE global activities in the Maui Meeting (MM) and International Conference on Electrical Engineering (ICEE), the paper discusses the framework of the International Joint Study Programme for History of Technology Interaction (IJSP/HTI) on the basis of its current study conducted by the Investigation Committee for International Joint Study for History of Technology Interaction (IC/HTI). It concludes the discussion with the view that the study of history could serve as a foundation for us to achieve global contributions in the field of engineering as well. © 2006 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Efficient power regeneration and drive of an induction motor by means of optimal torque derived by the variational method

When the motor speed is reduced by using a regenerative brake, the mechanical energy of rotation is converted to electrical energy. When the regenerative torque is large, the corresponding current increases so that the copper loss also becomes large. On the other hand, the damping effect of rotation increases with time when the regenerative torque is small. In order to use this limited energy effectively, the optimal regenerative torque should be ascertained in order to maximize the regeneration of electrical energy. This paper proposes a methodology, based on the variational method, for the design of regenerative torque for an induction motor in order to maximize the regenerative electric energy. Similarly, the optimal torque for acceleration is derived in order to minimize the driving energy. Finally, an efficient motor drive system with the proposed optimal torque and a power storage system stabilizing the DC link voltage will be proposed. The effectiveness of the proposed methods is illustrated by simulations and experiments. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 173(1): 41–50, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.21010     

Natural language understanding based on mental image description language <Emphasis Type="Italic">L</Emphasis><Subscript><Emphasis Type="Italic">md</Emphasis></Subscript> and its application to language-centered robot manipulation

The authors have been working on natural language understanding based on the knowledge representation language L _md and its application to robot manipulation by verbal suggestion. The most remarkable feature of L _md is its capability of formalizing spatiotemporal events in good correspondence with human/robotic sensations and actions, which can lead to integrated computation of sensory, motory and conceptual information. This paper describes briefly the process from text to robot action via semantic representation in L _md and the experimental results of robot manipulation driven by verbal suggestion. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Use of ultra-thin cross-linked polymer films for preparation of stable mono-dispersed carbon nanotubes

We report on the use of ultra-thin cross-linked polymer films to coat carbon nanotubes (CNTs). When n-dodecyl glyceryl itaconate, an amphiphilic monomer, and N,N'-methylenebis(acrylamide), a cross-linker, were mixed with CNTs, an ultra-thin cross-linked DGI polymer film formed on the surface of the individual CNTs by self-assembly polymerization. The CNTs modified with the cross-linked DGI polymer film are highly soluble in water with a multi-walled CNT concentration of up to 1 wt.%, providing an attractive approach for preparing stable, mono-dispersed CNT solutions.     

An Automatic Guidance System of a Self-Controlled Vehicle

An automatically guided vehicle, traveling without fixed guide ways, has been developed. In this paper, the construction of the vehicle, the control algorithm, and its general performance are described.     

Daily variation in an intensity of kaolin-induced writhing reaction in mice

The daily variation in an intensity of kaolin-induced writhing reaction was examined in mice kept under conditions of light; 07:00 - 19:00 and dark; 19:00 - 07:00. The number of writhes was counted for 30 minutes after a single intraperitoneal injection of kaolin at 00:00, 02:00, 04:00, 06:00, 08:00, 10:00, 12:00, 14:00, 16:00, 18:00, 20:00 and 22:00. The number of writhes showed a daily variation with a peak at 18:00 and a trough at 06:00. The intensity of writhing reaction was significantly reduced by pretreatment with the bradykinin B1 (Des-Arg9-[Leu8]-BK) and B2 (icatibant) receptor antagonists. Significant daily variation in this parameter was still observed in the group with the B1 antagonist, but disappeared in the B2 antagonist-treated group. These results suggest that the kaolin-induced writhing reaction shows the daily variation with a peak at the end of the resting period and a trough at the end of the active period. The B2 receptor mediated stimuli appears to be involved in this phenomenon.     

A 144-Mb, eight-level NAND flash memory with optimized pulsewidthprogramming

We report a fast-programming, compact sense and latch (SL) circuit to realize an eight-level NAND flash memory. Fast programming is achieved by supplying optimized voltage and pulsewidth to the bit lines, according to the programming data. As a result, all data programming is completed almost simultaneously, and 0.67-MB/s program throughput, which is 1.7 times faster than conventional program throughput, is achieved. The compact layout of the SL circuit is made possible by four 3-bit latches sharing one unit of the read/verify control circuit. Using these techniques, we fabricated a 144-Mb, eight-level NAND flash memory using a 0.35-μm CMOS process, resulting in a 104.2-mm² die size and a 1.05-μm² effective cell size