The adsorption behavior of cesium on poly(N-isopropylacrylamide/itaconic acid) copolymeric hydrogels

In this study, N-isopropylacrylamide/itaconic acid (NIPAAm/IA) hydrogels prepared by irradiating with γ radiation were used in experiments on cesium ion adsorption. The cesium ion adsorption capacity of the hydrogels was investigated as a function of Cs⁺ concentration, pH and temperature. The adsorption behavior of cesium was evaluated by using the radiotracer method. The adsorption isotherm models were applied to the experimental data, and it was seen that Freundlich isotherm explained the adsorption better than Langmuir isotherm. Two simplified kinetic models including pseudo-first-order and pseudo-second-order equation were selected to follow the adsorption processes. The Cs⁺ adsorption could be best described by the pseudo-first-order equation. The thermodynamic parameters including ΔG°, ΔH° and ΔS° for adsorption processes of Cs⁺ on the hydrogel were also calculated, and the negative ΔH° and ΔG° confirmed that the adsorption process was exothermic and spontaneous.     

Direct Extraction of Propionic Acid from Propionibacterium acidipropionici Broths with Tri‐n‐octylamine

The direct reactive extraction of propionic acid from Propionibacterium acidipropionici broths with solutions of tri‐n‐octylamine in dichloromethane, n‐butyl acetate or n‐heptane underlined the strong negative influence of the cells, due to the blockage of the interface by their adsorption. The magnitude of this effect <#>depends on the affinity of the cells for the organic phase, which is more important for n‐heptane, but only at biomass concentrations below 18 g L^–1 d.w. (dry weight). Moreover, the interfacial mass transfer of the acid is also controlled by the solvent polarity, and is accelerated from n‐heptane to dichloromethane and by the addition to the organic phase of 1‐octanol as a phase modifier. The influences of the biomass concentration, the rotation speed and the solvent dielectric constant were included in a mathematical model describing the solute mass flow from the aqueous to the organic phase.     

Polystyrene Containing Carbinolamine/Azomethine Potentially Useful as Antimicrobial Agent: Synthesis and Biological Evaluation

An investigation of antimicrobial properties of 12 novel modified polymer derived from the condensation reaction of (aminomethyl)polystyrene and four substitute salicylaldehyde (2-hydroxy benzaldehyde, 5-fluoro-2 hydroxy benzaldehyde, 5-fluoro-3-chloro-salicylaldehyde and 5-fluoro-3-methyl-salicylaldehyde) has been carried out and Cr(III) and Ni(II) complexes have been prepared. Modified polymers were characterized by magnetic susceptibility, elemental analyses, and spectral studies. The ¹H NMR and ¹³C NMR spectra analysis of the polymeric carbinolamine/azomethine were determined. In addition, surface morphology and composition were determined by SEM/EDX. Thermo gravimetric analyses of polymers were carried out in nitrogen atmosphere. Antibacterial activities of the polymers attached carbinolamine/azomethine and their complexes were studied by the well-diffusion method against Listeria monocytogenes 4b, Staphylococcus aureus, Escherichia coli, Salmonella typhi H, Brucella abortus, Staphylococcus epidermis sp., Micrococcus luteus, Shigella dysenteria type 10, Bacillus cereus, Pseudomonas putida and antifungal activity against Candida albicans.     

Leaching kinetics of colemanite in ammonium hydrogen sulphate solutions

The aim of the study was to investigate the dissolution kinetics of colemanite in ammonium hydrogen sulphate solutions in a mechanical agitation system and to declare an alternative reactant to produce boric acid. Reaction temperature, concentration of ammonium hydrogen sulphate, stirring speed, solid/liquid ratio and particle size were selected as parameters on the dissolution rate of colemanite. The experimental results were successfully correlated by linear regression using Statistica Package Program. Dissolution curves were evaluated in order to test shrinking core models for solid–fluid systems. It was observed that increase in the reaction temperature and decrease in the solid/liquid ratio causes an increase the dissolution rate of colemanite. The dissolution extent is highly increased with increase the stirring speed rate between 100 and 500 rpm and the dissolution extent is slowly increased with increase the stirring speed between 500 and 700 rpm in experimental conditions. The activation energy was found to be 32.66 kJ/mol. The leaching of colemanite was controlled by diffusion through the ash or product layer. The rate expression associated with the dissolution rate of colemanite depending on the parameters chosen may be summarized as follows: 1 ? 3(1 ? X)^2/3 + 2(1 ? X) = 8.99 × C^1.08 × W^1.39 × D^?1.27 × (S/L)^?0.54 × e^(?32.66/RT)t.     

Preparation of hybrid PU/PCL fibers from steviol glycosides via electrospinning as a potential wound dressing materials

In this study, the synthesis and application of biocompatible steviol glycosides based polyurethane/poly (ε-caprolactone) (PU/PCL) fibers was performed by electrospinning as a potential wound dressing materials that can be used for the closure of nonhealing wounds. During electrospinning, steviol glycoside-based polyurethane structures were used in blend formation with poly (ε-caprolactone) for easy producibility. Steviol glycosides are a natural abundant and easily accessible source as the main component of the wound dressing material due to their free hydroxyl groups, high biocompatibility, and hydrophilicity. The structure of steviol glycosides is composed of saccharide units and the free OH groups. Thus, steviol glycosides act as a crosslinker within the polyurethane structure and provides mechanical strength. For the production of steviol glycosides based PU/PCL fibers first, the steviol glycosides as a monomer were isolated from the stevia rebudiana. Then, polyurethane structures containing stevia glycoside were synthesized with hexamethylene diisocyanate, lactose and PEG-200 by solution polymerization technique. PCL was added to the prepared polyurethanes in a ratio of 1:2 and formation of nanofiber structure. The prepared wound dressing material was characterized by Fourier transform infrared, atomic force microscopy, and scanning electron microscope techniques. Swelling degree, water content and oxygen permeability assay of the steviol glycosides based PU/PCL wound dressing material was determined. In biocompatibility test, cell viability value of PU/PCL fibrous materials in indirect cytotoxicity test was determined as 86.9% and cell adhesion on hybrid PU/PCL fibers was showed as morphological. In accordance with this target, the steviol glycosides based PU/PCL wound dressing material can be produced easily and low cost. As a result, the wound dressing materials obtained with their high biocompatibility and low costs will be an effective and fast method for the healing of open wounds of diabetics.     

Degradation kinetics of PVC plasticized with different plasticizers under isothermal conditions

The aim of the present work is to elucidate the degradation kinetics of polyvinyl chloride (PVC) plasticized with some phthalate and nonphthalate plasticizers. A PVC thermomat instrument was utilized to maintain the isothermal degradation conditions at 140 and 160°C, and to suppress the oxidative degradation by means of nitrogen flow. The conductivity measurements were performed to follow hydrogen chloride (HCl) gas which is released upon PVC degradation and trapped in water. Dehydrochlorination of plasticized PVC films occurred with activation energies of about 23–160 and 26–117 kJ mol^?1 and the isokinetic temperatures, at which the dehydrochlorination rate constants of all p‐PVC films would have the same value, were found to be 171 and 128°C for initial and linear regions of dehydrochlorination curve, respectively. Plasticizer incorporation contributes to the stability of the films particularly after the consumption of stabilizer due to the dehydrochlorination. Influence of temperature rise by 20°C on the degradation rate constant is the lowest for DINCH having p‐PVC films as 0.36 and 0.42% increment at the initial region and linear region, respectively. On the other hand, DOTP reveals greater stability than the others do since the compensation ratio of the PVC film having DOTP is greater than the other films. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41579.