Polymer‐based transistors used as pixel switches in active‐matrix displays

A 2‐in. active‐matrix display was demonstrated, containing 4096 solution‐processed polymer‐based transistors. By using the polymer‐dispersed liquid‐crystal display (LCD) effect, this results in a reflective, low‐power display with paper‐like contrast. The influence of the transistor parameters on the display performance is analyzed by use of a model for charging and discharging of the pixel capacitors. Good agreement was obtained between the model and the experimental data. Scaling behavior allows estimation of the performance required for transistors in a quarter‐VGA display. These requirements are met by solution‐processed pentacene transistors.     

Morphological studies of late-stage spinodal decomposition in polystyrene–cyclohexanol system

We studied the late-stage spinodal decomposition of the polystyrene–cyclohexanol system in relation to membrane formation. Phase separation was effected by the removal of thermal energy from the homogeneous polymer solution. The ultimate morphology of the phase-separated systems has been studied using electron microscopy and has been found to be strongly affected by the quenching time. A shift from a highly interconnected open-cell structure to a closed-cell structure has been observed, indicating the transition of the spinodal decomposition from early to late stages. The cell growth in the late stage has been quantitatively analyzed and a power-law relationship between the cell size and quenching time has been found. The resulting exponent of 0.61 is consistent with literature values from light-scattering measurements, as well as from theoretical derivations. © 1995 John Wiley & Sons, Inc.     

Metal-catalyzed oxidation in the presence of water in foods

Methyl linoleate was oxidized in model systems consisting of either cellulose or casein with which the lipid was dispersed with water containing cobalt salts. The dispersion was extruded into Warburg flasks, frozen and freeze-dried at 100 μ Hg and with platen temperatures of 80 F. The samples were then humidified over saturated salt solutions to give moisture contents from less than 1 g H₂O/100 g solids up to 30 g H₂O/100 g solids. The higher moisture contents were obtained by addition of glycerol to the model system during preparation and humidification at 60–75% RH. Chelating agents including EDTA and citric acid in concentrations of 1 to 10 moles per mole of cobalt ion were used in some experiments. Oxidation was followed manometrically and by peroxide analysis. At low water contents, water acts as an antioxidant through hydration of metallic catalysts. As the moisture content increases, water promotes oxidation through its solvent activity. In the region of capillary condensation, antioxidant effect of metal hydration is overshadowed by the prooxidant effect of metal solubilization. The water soluble chelating agents such as EDTA act on metals in aqueous solution and their activity is promoted by increased moisture content. One of 28 papers presented at the Symposium, “Metal-Catalyzed Lipid Oxidation,” ISF-AOCS World Congress, Chicago, September 1970.     

Using the biotic ligand model for predicting the acute sensitivity of cladoceran dominated communities to copper in natural surface waters

In this study, the acute copper sensitivity of field-collected cladoceran species was determined using their natural surface waters and a standard reconstituted test water as test medium. A total of 43 species were collected on two occasions from six different sites, representing different water types and chemistries in Europe. The collected species belonged to four different families (Daphniidae, Bosminidae, Macrothricidae, Chydoridae) and 11 different genera (Daphnia, Ctenodaphnia, Ceriodaphnia, Simocephalus, Scapholeberis, Alona, Acroperus, Chydorus, Eurycercus, Disparalona, Pleuroxus). In acute experiments with immobilization as end point, the 48-h median effective concentrations (48-h EC50) for the cladoceran species ranged from 5.30 to 70.6 microg of Cu L(-1) in standard test water and from 9.60 to 853 microg of Cu L(-1) in natural waters. The mean site sensitivity (the geometric mean of 48-h EC50 values of species within a community) ranged from 10.1 to 27.4 microg of Cu L(-1) in standard water and from 16.4 to 281 microg of Cu L(-1) in natural water. This indicates that bioavailability is more importantthan inter-community (species composition) differences in determining the variability of copper toxicity across different aquatic systems. For the four surface waters that had a pH within the range for which the acute Daphnia magna biotic ligand model (BLM) has previously been successfully validated, the BLM predicted 48-h EC50 values for 27 of the 28 tested cladoceran species within factor of 2 of the observed values. For the same sites, all community sensitivities were predicted within a factor of 2.3. The BLM was clearly over-protective for the two acidic surface waters tested. Hence, the BLM can be considered a valuable tool for estimating the potentially harmful effects of copperto natural cladoceran communities, but more research will be needed for acidic surface waters.     

Assessment of the mean-value of 17-hydroxypregnenolone in the umbilical blood of newborns by the exploratory analysis of biochemical data

The main aim of data analysis in biochemical metrology is the extraction of relevant information from biochemical data measurements. A system of extended exploratory data analysis (EDA) based on the concept of graphical tools for sample data summarization and exploration is proposed and the original EDA algorithm in S-Plus is available on the Internet at http://www.trilobyte.cz/EDA. To check basic assumptions about biochemical and medical data is to examine the independence of sample elements, sample normality and homogeneity. The exact assessment of the mean-value and the variance of steroid levels in controls is necessary for the correct assessment of the samples from patients. Data examination procedures are illustrated by a determination of the mean-value of 17-hydroxypregnenolone in the umbilical blood of newborns. For an asymmetric, strongly skewed sample distribution corrupted with outliers the best estimate of location seems to be the median. The Box–Cox transformation improves a sample symmetry. The proposed procedure gives reliable estimates of a mean-value for an asymmetric distribution of 17-hydroxypregnenolone when the arithmetic mean can not be used.     

Quasicrystal–crystal structural transformation in Al–5 wt.% Mn alloy

The atomic structure of Al–5 wt.%Mn (Al–5Mn) alloy, prepared by rapid solidification, and pre-annealed at 623 and 773 K for 5 and 1 h, respectively, were characterized by X-ray powder diffraction (XRD) and extended X-ray absorption fine structure (XAFS) techniques. The sample in as-quenched stage was found crystalline, consisting of metastable α-Al (Al–Mn solid solution) and icosahedral quasicrystalline I-Al₆Mn phases. Five hours annealing at 623 K proved thermal stability of both the phases. Pre-annealing at 773 K/1 h on the other hand leads to α-Al phase decomposition and structural transformation of metastable I-Al₆Mn to stable orthorhombic Al₆Mn phase. The EXAFS results indicate that Mn atoms are located preferably on the outer shell of icosahedrons. During the I-Al₆Mn→o-Al₆Mn transformation the total Al atoms coordinating one Mn were found to be constant (∼10). Based on the results, only distance/symmetry changes in atomic arrangement around Mn atoms were suggested.     

Crystallization of Pd40Cu30Ni10P20 bulk metallic glass with and without pressure

The glass-transition behavior of Pd40Cu30Ni10P20 bulk metallic glass was investigated by differential scanning calorimetry （DSC） and X-ray powder diffraction （XRD）. The effect of pressure on the crystallization behavior of Pd40Cu30Ni10P20 bulk glass was studied by in situ high-pressure and high-temperature X-ray powder diffraction using synchrotron radiation. Phase analyses show at least six crystalline phases in the crystallized sample, namely, monoclinic, tetragonal CuaPd-like, rhombohedral, fcc-Ni2Pd2P, fcc-（Ni, Pd） solid solution, and body-centered tetragonal （bct） NiaP-like phases. The onset crystallization temperature increases with pressure having a slope of 1 1 K/GPa in the range of 0 to 4 GPa. The results are attributed to the competing process between the thermodynamic potential barrier and the diffusion activation energy under pressure.     

New system theory and its impact on control theory

Real systems can include two types of state variables – dynamic and static. While dynamic state variables are a common part of each system, static variables are not and their presence in a system may cause some problems if standard system theories are used. In this paper, it is shown that, due to a new system theory (NST), it is possible to work correctly with systems and subsystems which include not only dynamic state variables, but also static state variables. If standard system theories are used, static variables in the real system cause not only problems in describing systems but also some challenges in control theory. These challenges involve, for example, some questions of controllability, reachability, or observability of a plant that includes static variables or the optimal control design of a plant that includes statical state variables. Some of the challenges mentioned are addressed in this paper after a brief introduction of the NST.