Formation of Furan Fatty Alkyl Esters from their Bis‐Epoxide Fatty Esters

Reactions of epoxidized alkyl soyate with four different alcohols: ethanol, isopropyl alcohol, 2‐ethylhexanol, benzyl alcohol, in the presence of Brønsted acid catalyst, were investigated. Products, not reported in prior studies of similar reactions, were found. These were furan fatty acid alkyl esters (FFE, mixture of alkyl 8‐(5‐hexyl‐2‐furyl) octanoate and alkyl 9‐(5‐pentyl‐2‐furyl)nonanoate) which were unambiguously identified by means of GC–MS and two‐dimensional NMR. Evidence suggests that the FFE are formed by an acid‐catalyzed rearrangement of the epoxidized linoleates. The FFE were formed in presence of all four alcohols tested and in the presence of either sulfuric acid or Amberlyst 15 catalyst. Yields of up to 13 %, as quantified by GC and NMR spectroscopies, were observed.     

Effect of chain length distribution on thermal characteristics of model polytetrahydrofuran (PTHF) networks

A series of model polytetrahydrofuran (PTHF) networks were synthesized via end-linking reactions of α, ω-allyl PTHF oligomers with a stoichiometric tetrafunctional crosslinker. The telechelic PTHF oligomers were synthesized by living cationic ring-opening polymerization of tetrahydrofuran followed by a termination reaction with allyl alcohol. Networks thus prepared have well-controlled architecture in terms of the inter-crosslink chain length (M_c) and chain length distribution: resulting in unimodal, bimodal and clustered structures. Unimodal network was prepared by using polymer chains of same molecular weight, bimodal networks were synthesized by using two groups of polymer chains with different average molecular weights, and the clusters are prepared by incorporating clusters of networks with small molecular weight chains in a network matrix made of longer chains. Thermal characteristics of these model networks were investigated as a function of crosslink density, as well as inhomogeneities of crosslink distribution using DSC. We demonstrate that glass transition temperature (T_g) and crystallization behavior (melting temperature and crystallinity) of the networks are both strongly influenced by crosslink density (M_c). By comparing the unimodal, bimodal and clustered networks with similar average M_c, the effects of inhomogeneities in the crosslink distribution on the thermal properties were also investigated. Results show that inhomogeneities have trivial influence on T_g, but strongly affects the crystallization behavior. Moreover, the effects of the content ratio and length ratio between long and short chains, and the effects of cluster size and size distribution on the thermal characteristics were also studied.     

Air-breathing microbial fuel cell with enhanced performance using nanocomposite proton exchange membranes

This work aims to improve the performance of air-breathing microbial fuel cells (MFCs) through using hydrocarbon polymer based nanocomposite proton exchange membranes. Accordingly, nanocomposite membranes based on sulfonated poly(ether ether ketone) (SPEEK) and montmorillonite (MMT) were investigated for such an application. Although the incorporation of MMT into SPEEK membranes resulted in reduced oxygen permeability as well as proton conductivity, but the overall selectivity was found to be improved. MFC tests revealed that using the optimized nanocomposite membrane (SPEEK-70/MMT-3 wt%) results in a considerably higher open circuit voltage (OCV) compared to the corresponding neat membrane. Moreover, it was found that the SPEEK-70/MMT-3 wt% membrane is able to provide about 40% more power output than Nafion^®117. On the account of high proton conductivity, low oxygen permeability, high electrochemical performance, ease of preparation and low cost, hydrocarbon based nanocomposite PEMs could be considered as promising electrolytes to enhance the performance of MFCs.     

Correlation of the loss in photovoltaic module performance with the ageing behaviour of the backsheets used

The influence of the type of backsheet on the electrical performance of test modules was evaluated before and after increasing time of accelerated ageing (damp heat [DH] exposure). Besides the measurement of the electrical power of the modules and the performance of the cells by electroluminescence, the ageing‐induced changes within the polymeric encapsulate and backsheets were investigated by means of vibrational spectroscopy and by thermo analytical methods. In addition, the permeability of the backsheets in the original and aged state was determined. This wide set of test parameters and methods allowed for the detection of correlations between (i) physical and chemical properties as well as their ageing‐induced changes of the materials and (ii) the module performance. A clear dependence of the relative loss in power output upon exposure under DH conditions for 2000 h could be observed for a set of identical test modules varied in composition only in the type of back cover used. While the modules containing gas‐tight backsheets and glass experienced only little loss in the relative power output, some modules with permeable backsheets showed a significant relative decrease in the power output and fill factor in dependence of the backsheet type used. Cell degradation could be visualised by recording electroluminescence images before and after the accelerated ageing test. The permeation properties of the backsheet used and their ageing‐induced changes seem to have an influence on the module performance. However, the absolute values neither of the water vapour transmission rate (WVTR) nor of the oxygen transmission rate (OTR) are directly linked to the loss in power output upon accelerated ageing under DH conditions. It could be shown that the ageing‐induced changes (relative transmission rates) between WVTR and OTR can be correlated with the module performance. These ageing‐induced changes in the permeation behaviour of the backsheets can be explained by (i) physical changes (e.g. post‐crystallisation, changes in the crystal structure or the crystalline microstructure) and (ii) chemical ageing effects such as a decrease in the molecular mass of the polyester (PET) polymer chains because of hydrolytic polymer degradation leading to a change in the crystallisation behaviour of PET. Hydrolytic degradation (= chemical ageing) of the PET core layer was observed (with varying extent) for all PET‐based backsheets and can, thus, not be directly correlated with the loss in performance of the corresponding test modules. The physical ageing effects, however, were detected only for those backsheets showing (i) strong deviating changes in the relative permeation rates for oxygen and water vapour upon accelerated ageing and (ii) a clear loss in electrical performance. Copyright © 2015 John Wiley & Sons, Ltd.     

Microvascular Experimentation in the Chick Chorioallantoic Membrane as a Model for Screening Angiogenic Agents including from Gene-Modified Cells

The chick chorioallantoic membrane (CAM) assay model of angiogenesis has been highlighted as a relatively quick, low cost and effective model for the study of pro-angiogenic and anti-angiogenic factors. The chick CAM is a highly vascularised extraembryonic membrane which functions for gas exchange, nutrient exchange and waste removal for the growing chick embryo. It is beneficial as it can function as a treatment screening tool, which bridges the gap between cell based in vitro studies and in vivo animal experimentation. In this review, we explore the benefits and drawbacks of the CAM assay to study microcirculation, by the investigation of each distinct stage of the CAM assay procedure, including cultivation techniques, treatment applications and methods of determining an angiogenic response using this assay. We detail the angiogenic effect of treatments, including drugs, metabolites, genes and cells used in conjunction with the CAM assay, while also highlighting the testing of genetically modified cells. We also present a detailed exploration of the advantages and limitations of different CAM analysis techniques, including visual assessment, histological and molecular analysis along with vascular casting methods and live blood flow observations.     

Airway Delivery of Hydrogel-Encapsulated Niclosamide for the Treatment of Inflammatory Airway Disease

Repurposing of the anthelminthic drug niclosamide was proposed as an effective treatment for inflammatory airway diseases such as asthma, cystic fibrosis, and chronic obstructive pulmonary disease. Niclosamide may also be effective for the treatment of viral respiratory infections, such as SARS-CoV-2, respiratory syncytial virus, and influenza. While systemic application of niclosamide may lead to unwanted side effects, local administration via aerosol may circumvent these problems, particularly when the drug is encapsulated into small polyethylene glycol (PEG) hydrospheres. In the present study, we examined whether PEG-encapsulated niclosamide inhibits the production of mucus and affects the pro-inflammatory mediator CLCA1 in mouse airways in vivo, while effects on mucociliary clearance were assessed in excised mouse tracheas. The potential of encapsulated niclosamide to inhibit TMEM16A whole-cell Cl⁻ currents and intracellular Ca²⁺ signalling was assessed in airway epithelial cells in vitro. We achieved encapsulation of niclosamide in PEG-microspheres and PEG-nanospheres (Niclo-spheres). When applied to asthmatic mice via intratracheal instillation, Niclo-spheres strongly attenuated overproduction of mucus, inhibited secretion of the major proinflammatory mediator CLCA1, and improved mucociliary clearance in tracheas ex vivo. These effects were comparable for niclosamide encapsulated in PEG-nanospheres and PEG-microspheres. Niclo-spheres inhibited the Ca²⁺ activated Cl⁻ channel TMEM16A and attenuated mucus production in CFBE and Calu-3 human airway epithelial cells. Both inhibitory effects were explained by a pronounced inhibition of intracellular Ca²⁺ signals. The data indicate that poorly dissolvable compounds such as niclosamide can be encapsulated in PEG-microspheres/nanospheres and deposited locally on the airway epithelium as encapsulated drugs, which may be advantageous over systemic application.     

包容性工程—借助工程技术发明为身体或精神障碍人士赋能

1. Background The use of engineering tools, design, research, and thinking to create environments and capabilities whereby individuals who are currently under-e...     

Development and characterization of inks for screen printing of glass solders for SOFCs

Glass ceramics are supposed to produce stable sealants between ceramic electrolyte and ferritic steel in planar SOFC stacks. The screen printing method is a suitable industrial process in order to produce layers with tailored height and width reproducibly. An appropriate suspension was developed for this application and improved by adjusting the additive composition. This study investigates the rheological behavior of screen printing inks and the corresponding topography of the printed layers. Rotary measurements were carried out to analyse the impact of shear rates on viscosity showing shear thinning behavior. In addition, oscillatory rheometry is performed to gain information about the viscoelastic properties of the slurries and to understand the internal structure of the developed inks. The viscoelasticity and the recovery behavior after shear loading are crucial for the topography of printed films. The principal investigations are executed on solvent-based suspensions, whereby the knowledge gained is used for a transfer to water-based systems allowing a more environmentally friendly handling.     

Polybrominated diphenyl ethers in the sediments of the Great Lakes. 3. Lakes Ontario and Erie

Sediment cores were taken in 2002 in Lakes Ontario and Erie at four locations. A total of 48 sediment samples were characterized, dated using 210Pb, and analyzed for 10 congeners of polybrominated diphenyl ethers (PBDEs) including BDE209 as well as 39 congeners of polychlorinated biphenyls (PCBs). The surficial concentrations of nine tri- through hepta-BDE congeners (sigma9PBDE) are 4.85 and 6.33 ng g(-1), at sampling sites ON40 and ON30 in Lake Ontario, and 1.83 and 1.95 ng g(-1) at ER37 and ER09 in Lake Erie, respectively, based on dry sediment weight. The surficial BDE209 concentrations are 242 and 211 ng g(-1) at ON40 and ON30 and 50 and 55 ng g(-1) at ER37 and ER09. The sigma(9-) PBDEs fluxes to the sediment around 2002 are 147 and 195 pg cm(-2) year(-1) at ON40 and ON30 and 136 and 314 pg cm(-2) year(-1) at ER37 and ER09, respectively. The fluxes of BDE209 are 6.5 and 7.3 ng cm(-2) year(-1) at ON30 and ON40 and 3.7 and 8.9 ng cm(-2) year(-1) at ER37 and ER09, respectively. Dramatic increases in PBDE concentrations and fluxes upward toward the sediment surface and the present time are evident at both locations in Lake Ontario, while PCBs concentrations peak in the middle of sediment cores around the dated time of 1970s and 1960s. For both locations of Lake Erie, the increasing trends of both PBDEs and PCBs from the bottom to the surficial segments were distorted by sediment mixing. BDE209 is the most abundant congener among PBDEs in the sediments, constituting about 96 and 91% of the total PBDEs on mass basis in Lakes Ontario and Erie, respectively.