A vectorial vibrating reed magnetometer with high sensitivity

A vibrating reed magnetometer with high sensitivity is constructed. Using optical signal pickup, modified excitation coils, and an acoustical reference excitation system, the high sensitivity of former constructions is combined with the detection of the magnetization component perpendicular to the bias field H. The calibration procedure providing increased reliability is simplified and allows hysteresis measurements with the magnetic easy axis of the sample oriented at an arbitrary angle with respect to H. Measurement results are given in order to demonstrate the performance of the apparatus     

Vital-Fluorochromization of Microorganisms Using 3′,6′-Diacetylfluorescein to Determine Damages of Cell Membranes and Loss of Metabolic Activity by Ozonation

Cell suspensions of Escherichia coli as a model for bacterial populations in wastewaters were treated with ozone as a disinfectant in a continuously operated pilot plant with a plug flow reactor. Suspensions with an initial number of CFU (colony forming units) of 10⁸ mL^?1 were ozonized with ozone concentrations up to 12 mg/L. Metabolic activities and membrane functions break down with increasing ozone concentrations. The fluorochromization using 3′,6′-diacetylfluorescein (FDA) proved to be a suitable method for the detection of an alteration in permeability of the cell membranes and an inactivation of metabolic activity. By fluorescence microscopic and photometric investigations it could be clearly demonstrated that, in the case of disinfection with ozone, inactivation of the cells includes first of all a damage of the cell membranes. In contrast to the determination of the number of CFU, fluorochromization allows the detection of alteration in metabolic activities.     

NUMERICAL ANALYSIS OF THE EFFECTS OF LOCAL HYDRODYNAMICS ON MASS TRANSFER IN HETEROGENEOUS POROUS MEDIA

Many engineering problems require the estimation of mass transfer coefficients in porous materials. In heterogeneous materials or in cases where mass transfer sites are not spatially uniform, empirical equations for mass transfer coefficients vary widely, and the origin of these differences is not well understood. In this article, we use a stochastic algorithm to model mass transfer from single particles in a two-dimensional heterogeneous packed bed. The computed mass transfer coefficients are used to generate a distribution of local Peclet numbers in the bed. Detailed hydrodynamics are then used to interpret variations in the local Peclet number. The results show clear relationships between pore structure, streamline patterns, and mass transfer rates.     

Chemical inhibitors when timing is critical: a pharmacological concept for the maturation of T cell contacts

Cellular signal transduction proceeds through a complex network of molecular interactions and enzymatic activities. The timing of these molecular events is critical for the propagation of a signal and the generation of a specific cellular response. To define the timing of signalling events, we introduce the combination of high-resolution confocal microscopy with the application of small-molecule inhibitors at various stages of signal transduction in T cells. Inhibitors of Src-family tyrosine kinases and actin dynamics were employed to dissect the role of the lymphocyte-specific tyrosine kinase Lck in the formation and maintenance of T cell receptor/CD3-dependent contacts. Anti-CD3epsilon-coated coverslips served as a highly defined stimulus. The kinetics of the recruitment of the yellow fluorescent protein-tagged signalling protein ZAP-70 were detected by high-resolution confocal microscopy. The analysis revealed that at 5 min after receptor engagement, Lck activity was required for maintenance of contacts. In contrast, after 20 min of receptor engagement, the contacts were Lck-independent. The relevance of the timing of inhibitor application provides a pharmacological concept for the maturation of T cell-substrate contacts.     

C-13 Rotating frame relaxation of solid polymers

Summary ¹³c T₁ of some polymers has been measured at various temperatures. This relaxation is sensitive to other motions than those determining the proton relaxation. The T₁'s of polyethylene and poly(ethylene-vinylacetate) show minima which correspond to second moments of 108 s^–2 and 4·10⁸ s^–2, respectively, in contrary to the theoretical value of 4·10⁹ s^–2. The reason is a strongly restricted motion — e. g. torsional oscillation — which cannot average out completely the dipolar interaction. In poly(methylmethacrylate) and in poly(vinylacetate) a decrease of the restriction with increasing temperature has been observed.Presented at the 22nd Microsymposium, Characterization of Structure and Dynamics of Macromolecular Systems by NMR Methods, Prague, CSSR, July 20–23, 1981     

Investigations on the adhesion and interfacial properties of polyurethane foam/thermoplastic materials

The adhesion and interfacial properties of polyurethane (PU) foams with thermoplastic (TP) materials were investigated using different techniques. The adhesion performance of PU foam with TP materials was evaluated using the peel test method, and the adhesion durability was checked after different climate treatments. X‐ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and contact angle measurements were used to study the surface and interface morphology of PU foam and TP material system. Three types of PU foam samples which differ in their composition and also five commercially available TP blends systems, based on poly(carbonate), poly(styrene‐co‐maleic anhydride), poly(acrylonitrile‐butadiene‐styrene), and silicone acrylate rubber have been used. The slow reacting foam shows the best adhesion properties with all the TP materials. The climate treatments strongly effected the PU foam adhesion durability with poly(carbonate) containing TP materials (70–80% loss in adhesion), but nearly no effect with poly(styrene‐co‐maleic anhydride). The samples with lowered adhesion could be separated by peeling without visible foam residues on the TP surface. AFM, XPS, and surface tension studies have shown that the surface properties of the TP material are still governed by the PU foam. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 479–488, 2007     

Liquid flow and phase holdup—measurement and CFD modeling for two-and three-phase bubble columns

Bubble columns are an important class of contacting devices in chemical industry and biotechnology. Their simple setup makes them ideal reactors for two- and three-phase operations such as fermentations or heterogeneous catalysis. Still, design and operation of these reactors is subject to widely empirical scale-up strategies. With recent advances in the development of measurement techniques, a more detailed approach to the development of optimized reactors for specific operations should become possible. This report is based on detailed measurements of local dispersed phase holdups in a pilot plant-sized bubble column operated at high superficial gas velocities and solid holdups. It deals with the influence of superficial gas velocity, solid loading and sparger geometry on measured and computed liquid flow velocities and holdup distributions. Liquid velocity measurements have been performed using the electrodiffusion method, modeling calculations have been carried out using the computational fluid dynamics (CFD) code CFX-4.3. Measurement results presented here give an insight into the development of liquid circulation and fluctuating velocity distribution depending on superficial gas velocity, solid loading and sparger geometry. CFD results implementing a multi-fluid model with k-ε turbulence and special momentum exchange terms for direct gas-solid interactions show that, even on standard PC workstations, this kind of computations can deliver qualitatively reasonable agreement with measurements.     

Untersuchung des Passivierungsmechanismus von Eisen in Phosphatelektrolyten an erosiv beanspruchten Oberflächen

Investigation into the passivation mechanism of iron in phosphate electrolytes on surfaces exposed to erosive attack On iron electrodes in neutral phosphate electrolytes by continuous solid particle impingement a reaction layer is formed within the transition potential region under anodic polarization. XPS and AES investigations show that the reaction layer formed under impingement will be replaced by an oxide layer during the transition into the passive state under simultaneous decrease of the layer thickness. The active/passive transition in phosphate electrolytes may be attached to the equilibrium potential of the reaction . According to this thermodynamic interpretation of both the active/passive transition and the passive/active transition, respectively on iron in presence of phosphate ions may be described as the Fe(II)/Fe(III)-redox reaction with two solid phases, the iron(II)-phosphate phase and the iron(III)-oxide phase. The increase of the interfacial dynamic processes at the solid/liquid interface causes in consequence of the solid particle impingement that thermodynamic laws govern the course of reactions.     

Combining the triangle method with thermal inertia to estimate regional evapotranspiration — Applied to MSG-SEVIRI data in the Senegal River basin

Spatially distributed estimates of evaporative fraction and actual evapotranspiration are pursued using a simple remote sensing technique based on a remotely sensed vegetation index (NDVI) and diurnal changes in land surface temperature. The technique, known as the triangle method, is improved by utilizing the high temporal resolution of the geostationary MSG-SEVIRI sensor. With 15 min acquisition intervals, the MSG-SEVIRI data allow for a precise estimation of the morning rise in land surface temperature which is a strong proxy for total daytime sensible heat fluxes. Combining the diurnal change in surface temperature, dT_s with an interpretation of the triangular shaped dT_s − NDVI space allows for a direct estimation of evaporative fraction. The mean daytime energy available for evapotranspiration (R_n − G) is estimated using several remote sensors and limited ancillary data. Finally regional estimates of actual evapotranspiration are made by combining evaporative fraction and available energy estimates. The estimated evaporative fraction (EF) and actual evapotranspiration (ET) for the Senegal River basin have been validated against field observations for the rainy season 2005. The validation results showed low biases and RMSE and R² of 0.13 [−] and 0.63 for EF and RMSE of 41.45 W m^− 2 and R² of 0.66 for ET.