Gaseous and particulate emissions from prescribed burning in Georgia

Prescribed burning is a significant source of fine particulate matter (PM2.5) in the southeastern United States. However, limited data exist on the emission characteristics from this source. Various organic and inorganic compounds both in the gas and particle phase were measured in the emissions of prescribed burnings conducted at two pine-dominated forest areas in Georgia. The measurements of volatile organic compounds (VOCs) and PM2.5 allowed the determination of emission factors for the flaming and smoldering stages of prescribed burnings. The VOC emission factors from smoldering were distinctly higher than those from flaming except for ethene, ethyne, and organic nitrate compounds. VOC emission factors show that emissions of certain aromatic compounds and terpenes such as alpha and beta-pinenes, which are important precursors for secondary organic aerosol (SOA), are much higher from active prescribed burnings than from fireplace wood and laboratory open burning studies. Levoglucosan is the major particulate organic compound (POC) emitted for all these studies, though its emission relative to total organic carbon (mg/g OC) differs significantly. Furthermore, cholesterol, an important fingerprint for meat cooking, was observed only in our in situ study indicating a significant release from the soil and soil organisms during open burning. Source apportionment of ambient primary fine particulate OC measured at two urban receptor locations 20-25 km downwind yields 74 +/- 11% during and immediately after the burns using our new in situ profile. In comparison with the previous source profile from laboratory simulations, however, this OC contribution is on average 27 +/- 5% lower.     

Influence of in situ biofilm coverage on the radionuclide adsorption capacity of subsurface granite

Any migration of radionuclides from nuclear waste repositories is expected to be mitigated by adsorption to the host rocks surrounding hydraulically conductive fractures. Fluid rock interfaces are considered to be important barriers for nuclear waste disposal schemes but their adsorptive capacity can be affected by the growth of microbial biofilms. This study indicates that biofilms growing on fracture surfaces decrease the rocks adsorption capacity for migrating radionuclides except for trivalent species. Potential suppression of adsorption by biofilms should, therefore, be accounted for in performance safety assessment models. In this study, the adsorptive capacity of in situ anaerobic biofilms grown 450 m underground on either glass or granite slides was compared to the capacity of the same surfaces without biofilms. Surfaces were exposed to the radiotracers 60Co(II), 147Pm(III), 241Am(III), 234Th(IV), and 237Np(V) for a period of 660 h in a pH neutral anaerobic synthetic groundwater. Adsorption was investigated at multiple time points over the 660 h using liquid scintillation and ICP-MS. Results indicate that these surfaces adsorb between 0 and 85% of the added tracers under the conditions of the specific experiments. After 660 h, the distribution coefficients, R (ratio between what is sorbed and what is left in the aqueous phase), approached 3 x 10(4) m for 60Co, 3 x 10(5) m for 147Pm and 241Am, 1 x 10(6)m for 234Th, and 1 x 10(3) m for 237Np. The highest rate of adsorption was during the first 200 h of the adsorption experiments and started to approach equilibrium after 500 h. Adsorption to colloids and precipitates contributed to decreases of up to 20% in the available 60Co, 147Pm, 241Am, and 237Np in the adsorption systems. In the 234Th system 95% of the aqueous 234Th was removed by adsorbing to colloids. Although the range of Rvalues for each surface tested generally overlapped, the biofilms consistently demonstrated lower R values except for the trivalant 147Pm and 241Am adsorption systems.     

Influence of inoculation levels and processing parameters on the survival of Campylobacter jejuni in German style fermented turkey sausages

This study investigated the influence of inoculum levels and manufacturing methods on the survival of Campylobacter (C.) jejuni in raw fermented turkey sausages. Sausages were prepared and inoculated with C. jejuni. After inoculation, these sausages were processed and ripened for 8 days. Samples were taken throughout the ripening process. The presence of C. jejuni was established bacteriologically. Additionally, lactic acid bacteria were enumerated, pH values and water activity were measured to verify the ripening process. To detect changes in genotype and verify the identity of the recovered clones, AFLP analysis was carried out on the re-isolated strains. Whereas no C. jejuni were detectable when inoculating the sausages with the lowest inoculum (0.08-0.44 log(10) cfu/g sausage emulsion), C. jejuni were detectable for 12-24h by enrichment when inoculated with approximately 2 log(10) cfu/g. After inoculation with 4 and 6 log(10) cfu/g respectively, C. jejuni were detectable without enrichment for 12-48 h and by enrichment for 144 h at the most. The greatest decrease of the C. jejuni population occurred during the first 4 h of ripening. Only a very high inoculum level allowed the survival of the organism during a fermentation process and during ripening to pose a potential risk for consumers. Lower initial Campylobacter inoculums will be eliminated during proper ripening of the sausages, if sufficient decrease in water activity and pH-value is ensured.     

Electron transfer dynamics of bistable single-molecule junctions

We present transport measurements of single-molecule junctions bridged by a molecule with three benzene rings connected by two double bonds and with thiol end-groups that allow chemical binding to gold electrodes. The I-V curves show switching behavior between two distinct states. By statistical analysis of the switching events, we show that a 300 meV mode mediates the transition between the two states. We propose that breaking and reformation of a S-H bond in the contact zone between molecule and electrode explains the observed bistability.     

Measurement of a low-absorption sample of OH-reduced fused silica

Low-absorption optics made of OH-reduced fused silica are a key technology for future gravitational wave detectors such as the Advanced LIGO. We developed a sensitive method to measure the absorption inside the beam splitter of the GEO 600, taking advantage of the effect of thermal lensing. Using this method, we derived a bulk absorption of less than 0.25 ppm/cm for a piece of Suprasil 311 SV at a wavelength of 1064 nm. To the best of our knowledge, this is the lowest value of light absorption inside fused silica reported so far in the literature.     

Mass-balance estimation of heavy metals and selected anions at a landfill receiving MSWI bottom ash and mixed construction wastes

An estimation of the heavy metal and anion mass-balance was made for municipal solid waste incinerator bottom ash deposited at a construction and industrial waste landfill. The mass-balance was found by comparing the content of metals and anions in the landfill leachate to the metal and anion content in the deposited bottom ash. The discharge of heavy metals ranged from 0.001% for Pb to 0.55% for Cr, which is approximately at the same level as in regular municipal solid waste (MSW) landfills. Landfilled organic material and silicates from construction waste might have contributed to the retention of metals. Chloride, and to a lesser extent sulphate, appeared to be readily released from the landfill. It was estimated that a mass corresponding to 80% of the Cl- and 18% of the SO(4)2- in the bottom ash was discharged annually. Low retention, especially of chloride, may lead to a rapid decline in the discharge of this ion in the future when the landfilling of bottom ash is discontinued.