Long-Wave and Integral Boundary Layer Analysis of Falling Film Flow on Walls With Three-Dimensional Periodic Structures

Falling films exhibit very complex wavy patterns, which depend on the properties of the liquid, the Reynolds number, the wall inclination angle, and the distance from the film inlet. The film hydrodynamics governs the heat and mass transfer in the liquid films. Our vision is to control and enhance heat and mass transport by using walls with specific microscale topographies that influence the falling film flow, stability, and wavy pattern. In this work, long-wave theory and integral boundary layer approximation are used for modeling the falling film flow on walls with three-dimensional periodic microstructures. The wall topography is periodic both in the main flow direction and in the transverse direction. Examples of such microstructures are longitudinal grooves with sinusoidal path (or meandering grooves) and herringbone structures. The effects of the Reynolds number, the wall inclination angle, and the longitudinal and transverse periods of the structure on the shape of liquid–gas interface are investigated. It is shown that, as opposed to straight grooves in longitudinal direction, grooves with meandering paths may lead to significant interface deformations.     

SiC ceramic micropatterns from polycarbosilanes

Micropatterned SiC ceramics were fabricated from polycarbosilanes applying a softlithographic replication technique. A polydimethylsiloxane mould replicated from a photolithographic microstructured silicon wafer was used as master structure. The polydimethylsiloxane mould was coated with a solution containing a mixture of two different polycarbosilanes in n-octane. After treatment at 200–400 °C the cross-linked polycarbosilane films were debonded and pyrolysed at 900 °C in nitrogen and subsequently crystallised at temperatures up to 1500 °C in argon. The cross-linking and thermal degradation behaviour of the polycarbosilanes was investigated by Fourier-transform infrared spectroscopy, differential scanning calorimetry and thermogravimetric analysis. X-ray diffractrometry showed the expected development of a nanocrystalline β-SiC (3 nm) as the main phase with increasing temperature. However, traces of α-SiO₂ derived from the polycarbosilane precursors were also detected by X-ray analysis. Removal of the α-SiO₂ dioxide with hydrofluoric acid in the pyrolysed samples and subsequent increased the crystallite size to 7 nm. The Young's modulus determined by nanoindentation was increased from 3 GPa after cross-linking to 110 GPa after crystallisation. Scanning electron microscopy revealed, that the initial micropatterns were fully retained in the pyrolysed and crystallised SiC ceramics. The micropatterned cross-linked and crystallised β-SiC based substrates exhibited light scattering characteristics, which qualify them as promising candidates for diffractive optical elements in microoptical applications.     

OpenSocial

Zusammenfassung  OpenSocial definiert eine Menge von Programmierschnittstellen für Anwendungen von Drittanbietern im Kontext sozialer Netzwerke. Unter der Verwendung von Standardtechnologien wie HTML und JavaScript k?nnen Entwickler interoperable Anwendungen erstellen, die auf den sozialen Graphen des jeweiligen Netzwerks zugreifen.     

A Bayesian attractor network with incremental learning

A realtime online learning system with capacity limits needs to gradually forget old information in order to avoid catastrophic forgetting. This can be achieved by allowing new information to overwrite old, as in a so-called palimpsest memory. This paper describes an incremental learning rule based on the Bayesian confidence propagation neural network that has palimpsest properties when employed in an attractor neural network. The network does not suffer from catastrophic forgetting, has a capacity dependent on the learning time constant and exhibits faster convergence for newer patterns.     

Automated generation of a progress measure for the sweep-line method

In the context of Petri nets, we propose an automated construction of a progress measure which is an important pre-requisite for a state space reduction technique called the sweep-line method. Our construction is based on linear-algebraic techniques concerning the transition vectors of the Petri net under consideration. We further discuss the possible combination of the sweep-line method with other state space reduction techniques (partial order reduction, the symmetry method).     

Real-Time Imaging through Optical Fiber Array-Assisted Laser-Induced Fluorescence of Capillary Electrophoretic Enantiomer Separations

An advanced detection system based on laser-induced fluorescence imaging for capillary electrophoresis (CE) is presented. An optical fiber array was constructed for collection and transportation of the emitted fluorescent light to the charge-coupled device (CCD) camera. The fiber array makes the setup compact compared with a setup where the capillary is imaged through a camera objective. The imaging detector captures the sample zones in motion during the migration through the capillary. This allows unique studies on dynamic events otherwise unrevealed. During the study, unexplained nonlinear migration behavior was revealed. Enantiomer separations of dansylated amino acids using cyclodextrins, imaged between 1.5 and 12 cm of a 28-cm-long 50-μm i.d. capillary, were used for evaluation of the system. Comparing the optical fiber array with a camera lens system, the signal-to-noise-ratio (S/N) was 10 times higher. This is due to a combination of both higher signal and lower noise levels. To improve the S/N ratio further, a computer program for signal processing was designed. Using dichlorofluorescein, a concentration limit of detection (CLOD) of 350 pM was achieved and improved 10 times to 35 pM with computer postprocessing using 79 images. This is equal to 400 zeptomole for a 3-mm-long sample zone in a 50-μm i.d. capillary.     

Modelling of boron nitride: Atomic scale simulations on thin film growth

Molecular-dynamics simulations on ion-beam deposition of boron nitride are presented. A realistic Tersoff-like potential energy functional for boron nitride, which was specially fitted to ab initio-data, has been used. The impact of energetic boron and nitrogen atoms on a c-BN target is simulated with energies ranging from 10 to 600 eV. The structural analysis of the grown films shows that a loose, dominantly sp²-bonded structure arises at high ion flux. In no case the formation of a sp³-bonded phase is observed, but the obtained films partially reveal textured basal planes as found in experiment. Two different growth regimes are identified for ion energies above and below 100 eV.     

A Tree-based Mergesort

We demonstrate that if standard Mergesort is implemented using finger search trees instead of arrays it optimally adapts to a set of measures of presortedness not fulfilled by any other algorithm. Received: 7 October 1993 / 18 July 1996     

Direct tensile tests on prismatic concrete specimens

A new type of clamping grips for direct tensile tests on concrete is presented. The grips make it possible to use prismatic specimens without inducing stress concentrations of too high a magnitude and this significantly simplifies the manufacturing of specimens and the performance of direct tensile tests.Test results of the direct tensile strength determined by the new clamping grips are presented for a number of concrete types. These results are compared with test results of the flexural tensile strength and the ratio flexural tensile strength/tensile strength seems to agree well with the theoretical estimations.