Global data and control in multicomputers: Operating system primitives and experimentation with a parallel branch-and-bound algorithm

The static distribution of work among tasks is not possible in many parallel applications. Therefore, it is essential to implement convenient and efficient abstractions for ‘work sharing’ on multicomputers. This paper compares the utility of two operating system facilities for the implementation of such ‘work sharing’: (1) a system for the migration of processes from heavily to less loaded processors and (2) a more general OS construct for the implementation of arbitrary distributed objects. Both were implemented as extensions to the Intel iPSC/1 operating system on a 32-node hypercube. Their experimental evaluation is based on a parallel implementation of a branch-and-bound algorithm. Two sets of results are attained. First, the necessity of the constructs for dynamic work sharing is demonstrated for applications with dynamic data domains, such as parallel branch-and-bound algorithms. This is followed by measurements that demonstrate the acceptable cost of process migration for a specific parallel branch-and-bound algorithm. These measurements are then compared with results attained with the construct for the implementation of distributed objects. Second, when using branch-and-bound to solve the Travelling Salesperson Problem (TSP), evaluation of the resulting parallel TSP program shows that some analytical and simulation results attained in past, published work may not hold.     

Prostaglandine und Prostaglandinvorstufen. Oxydative Spaltung von Olefinen durch Ozonisierung und Oxydation im Lösungsmittelsystem Aceton/tert-Butanol – eine Methode zur Gewinnung von substituierten Cyclopentylessigsäuren

Prostaglandins and Prostaglandin Intermediates. Oxidative Cleavage of Olefins by Ozonization and Oxidation in the Solvent System Acetone/tert. Butanol – a Method for Preparation of Substituted Cyclopentyl Acetic Acids Oxidative cleavage of olefinic double bonds by ozonization in acetone in the presence of tert. butanol followed by oxidation with JONES ' reagent in the same solvent system gives carboxylic acids and/or ketones in good yields. Acetic acid or water can be used instead of tert. butanol with the same success. This “one-pot” procedure was developed in connection with the synthesis of intermediates for the preparation of 8-methyl-prostaglandin C₂.     

VIS/NIR spectroscopy for non-destructive freshness assessment of Atlantic salmon (Salmo salar L.) fillets

Visible/near-infrared spectroscopy has been evaluated for use in freshness prediction and frozen-thawed classification of farmed Atlantic salmon fillets, where fresh samples were stored as whole fish in ice. A handheld interactance probe for performing rapid measurements of single fillets and an imaging spectrometer for online analysis at an industrial speed of one fillet per second, have been used. Freshness as storage days in ice is predicted with an accuracy of 2.4 days for individual fillets, whereas frozen-thawed salmon fillets are completely separated from fresh fillets. The prediction results are comparable to previous results using the Quality Index Method with trained panelists. The region between 605 and 735 nm, which excludes interference by carotenoids and water, is appropriate for both frozen-thawed classification and freshness prediction of salmon fillets. The results indicate that the spectral changes are explained mainly by oxidation of heme proteins during the freeze–thaw cycle and during chilled storage in ice.     

Breaking the spores of the fungus Ganoderma lucidum by supercritical CO2

The hard sporoderm of Ganoderma lucidum spores prevents the release of bioactive components such as polysaccharides which have significant anti-tumour activity. In the present study, supercritical carbon dioxide (SC–CO₂) was used for the sporoderm breaking of G. lucidum spores, and polysaccharides were subsequently extracted and determined for evaluating the performances of SC–CO₂. The operating parameters were optimized by orthogonal array design (OAD), and the morphological status of sporoderm was observed by scanning electron microscope (SEM). The optimum operating conditions for SC–CO₂ breaking of sporoderm were as follows: pressure 35 MPa, temperature 25 °C, time 4 h, and CO₂ flow rate 10 kg/h. After SC–CO₂ processing, the extraction yield of polysaccharides reached 2.98%, which was 3-fold to that of the intact ones (0.94%). This method is fast, efficient and advanced enough to break the hard sporoderm of G. lucidum, which may provide a scientific reference for the large-scale processing of spores in the pharmaceutical and food industries.     

Einflu? von Ethanol auf den Trocknungsverlauf und die Makrostruktur eines Einzel-Zellmaterials aus Apfelparenchym (Sorte Granny Smith)

Ethanol pre-treated apple parenchyma cells are dried in a laboratory vacuum dryer. Various ethanol contents (75 to 95% m/m) and moisture contents (2 to 15 g ethanol-water-mixture per g dry mass) of the cells were adjusted before drying and the influence of these factors on drying behaviour as well as the related structural changes are studied. The initial ethanol content was found to have a significant influence on both, drying behaviour and macrostructure of the dried material. In the case of a low initial value, the ethanol content during drying already drops at moisture contents of about 0.5–1.5 g/g. As a consequence the residual particle moisture consists mainly of water at the end of drying. In contrast to high initial ethanol contents, cells at a low initial ethanol content become strongly deformed on drying. The porosity of the dried material also decreases in the latter case, relatively large and stable aggregates are formed and the water binding capacity of the dried product has diminished on a large scale. The initial moisture content influences the drying behaviour especially on applying low initial ethanol contents. If the initial moisture content is reduced the drop of the ethanol content is shifted towards the end of the drying process. The influence of initial moisture content on macrostructure, however, was found to be small compared with the effect of the initial ethanol content.

     

Systematic survey on the prevalence of genes coding for staphylococcal enterotoxins SElM, SElO, and SElN

Staphylococcus aureus remains a leading cause of food-poisoning with substantial impact on public health. Using a multiplex polymerase chain reaction-DNA enzyme immunoassay (PCR-DEIA), we studied the presence of genes encoding staphylococcal enterotoxin-like (SEl) superantigens sem, sen, and seo, associated with the enterotoxin gene cluster (egc), in 429 clinical Staphylococcus aureus isolates. 294 (68.5%) isolates tested positive for at least one of the three SEl genes. In contrast to the fixed gene combination seg/sei also located on egc, a substantial number of isolates (n = 108) were found to bear only one or two of the genes encoding SElM, SElN, and SElO. Regarding the origin of the S. aureus isolates, a significant difference (P = 0.022) was found for the possession of seo (61.2% of blood isolates versus 42.9% of nasal strains). Also sem (not significantly) was found more common in blood isolates (52.1% versus 40.5%). The survey of the newly described SEl genes sem-seo supports the concept that most clinical S. aureus isolates harbor subsets of pyrogenic toxin superantigens. The potential contribution of seo and sem to the pathogenic potential of S. aureus has to be further evaluated.     

Electrorefining of aluminium scrap from chloride melts

The production of aluminium of primary quality from scrap by electrorefining may become an option of strategic importance. Two important requirements are: (i) substantial energy savings compared to electrowinning, and (ii) easy recycling of alloying elements and molten electrolyte without ecological hazards. The use of molten chloride instead of fluoride electrolytes is preferred as emissions are low, purification of contaminated salts in aqueous solution is easy and oxide ceramic materials for cells and diaphragms can be used. The measurement of formal potentials of most important alloying elements shows that only manganese should be expected to cause trouble in electrorefining of aluminium scrap from alkali chloride melts. Preparative batch refining experiments show that all these alloying metals can be easily separated; manganese is very likely because its activity in aluminium is decreased by alloying or compound formation in aluminium. Results with cells divided by alumina diaphragms show that energy consumptions can be kept below 5 kWh (kg Al)^–1.     

Deformation-mediated superstructures and cavitation of poly (l-lactide): In-situ small-angle X-ray scattering study

Cavitation and superstructure evolution of polymers during stretching play crucial roles to influence the mechanical properties of materials. In this study, we investigated deformation-mediated superstructures and cavitation of poly (l-lactide) (PLA) as well as their dependence on stretching temperatures by in-situ small-angle X-ray (SAXS) analysis coupled with mechanical testing. It is found that the cavitation and crystalline deformation are strongly influenced by stretching stress during deformation, which significantly depends on the stretching temperature. At lower stretching temperature (70 °C), the cavitation is initiated before the yielding and then stimulates the crystallite shearing. At higher stretching temperature (90 °C), however, the crystallites shear firstly and then crystalline deformation promotes the formation of cavities orientated along the stretching direction. High stretching temperature benefits the formation of relatively perfect crystals with high orientation. The results provide the basic knowledge of how to adjust the mechanical properties of polymer materials by controlling their superstructure in the deformation process.     

A Synthetic Approach to Star‐Like Polymers of Styrene and Butyl Acrylate by Linking Reactions using Functionalized Methacrylates

Summary: Coupling reactions between terminal functionalized polymer chains were chosen for the synthesis of star‐like polymers consisting of polystyrene and polystyrene‐block‐poly[styrene‐co‐(butyl acrylate)] arms. For the preparation of terminal functionalized polymer chains a side reaction of the 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) mediated free radical polymerization of methacrylates could be used successfully to convert TEMPO terminated polymers into end functionalized polymers. The number of functionalized monomer units attached to the polymer chain is directly related to the TEMPO concentration during this reaction. Different polystyrenes and polystyrene‐block‐poly[styrene‐co‐(butyl acrylate)] block copolymers were functionalized with a variable number of epoxide and alcohol groups at the chain end. For the determination of the optimal reaction parameters for the coupling reactions between these polymer chains, epoxy functionalized polystyrenes were converted with hydroxy functionalized polystyrenes under basic and acidic conditions. By activation with sodium hydride or boron trifluoride star‐like polymers were synthesized under mild conditions. The transfer of the reaction conditions to coupling reactions between end functionalized polystyrene‐block‐poly[styrene‐co‐(butyl acrylate)] copolymers showed that star‐like polymers with more than 12 arms were formed using boron trifluoride as activating agent.