Prediction of the effects on dynamic response due to distributed structural modification with additional degrees of freedom

The aim of this study is to investigate means of efficiently assessing the effects of distributed structural modification on the dynamic properties of a complex structure. The dynamic properties of the modified structure can be determined by experimental testing or numerical simulation, both of which are complex, expensive and time-consuming. Assuming that the original dynamic characteristics are already established and that the modification is a relatively simple attachment, the modified dynamic properties may be determined numerically without solving the equations of motion of the full-modified structure. The frequency response functions (FRFs) of the modified structure can be computed by coupling the original FRFs and a delta dynamic stiffness matrix for the modification introduced. The validity of this approach is investigated by applying it to a cantilever beam to which a smaller beam is attached as modification. The original FRFs were obtained experimentally as well as numerically. The delta dynamic stiffness matrix was determined numerically by modeling the attachment and part of the original structure including the attachment points. The FRFs of the modified beam were then computed. Good agreement is obtained by comparing the results to the FRFs of the modified beam determined experimentally as well as by numerical modeling of the complete modified structure.     

An evolutionary lion optimization algorithm‐based image compression technique for biomedical applications

Recently, medical image compression becomes essential to effectively handle large amounts of medical data for storage and communication purposes. Vector quantization (VQ) is a popular image compression technique, and the commonly used VQ model is Linde–Buzo–Gray (LBG) that constructs a local optimal codebook to compress images. The codebook construction was considered as an optimization problem, and a bioinspired algorithm was employed to solve it. This article proposed a VQ codebook construction approach called the L2‐LBG method utilizing the Lion optimization algorithm (LOA) and Lempel Ziv Markov chain Algorithm (LZMA). Once LOA constructed the codebook, LZMA was applied to compress the index table and further increase the compression performance of the LOA. A set of experimentation has been carried out using the benchmark medical images, and a comparative analysis was conducted with Cuckoo Search‐based LBG (CS‐LBG), Firefly‐based LBG (FF‐LBG) and JPEG2000. The compression efficiency of the presented model was validated in terms of compression ratio (CR), compression factor (CF), bit rate, and peak signal to noise ratio (PSNR). The proposed L2‐LBG method obtained a higher CR of 0.3425375 and PSNR value of 52.62459 compared to CS‐LBG, FA‐LBG, and JPEG2000 methods. The experimental values revealed that the L2‐LBG process yielded effective compression performance with a better‐quality reconstructed image.     

AHW-BGOA-DNN: a novel deep learning model for epileptic seizure detection

Neural Computing and Applications - “Brain–Computer Interface” (BCI)—a real-life support system provides a way for epileptic patients to improve their quality of life. In...     

IR and Raman studies and effect of γ radiation on crystallization of some lead borate glasses containing Al2O3

IR and Raman spectra of glass ceramics based on PbO-Cr₂O₃-B₂O₃glass composition system have been studied. The bands characteristic of BO₃. and BO₄ functional groups are present in all the samples. An incorporation of Al₂O₃(up to 5 mol%) in the initial glass composition considerably changes the glass network structure and relative concentrations of BO₃ and BO₄ groups. The composition 50 PbO-20 Cr₂O₃-25 B₂O₃-5 Al₂O₃(in mol%) reveals a maximum fraction of boron in the BO₄ group. A sample of this composition heat treated at 850° C for 25 h shows a maximum crystallization fraction with Pb₂O · CrO₄ as a prominent crystalline phase. The glasses irradiated with rays inhibit the crystallization into the Pb₂O · CrO₄ phase. They also show relatively smaller thermal conductivity.     

Scanning Auger electron spectroscopy study of the oxide film formed on dendritic and interdendritic regions of C containing Fe3Al intermetallic

The oxide films formed during early stage of oxidation at 800 °C on dendritic and interdendritic regions of the cast Fe–16Al–1C (wt.%) alloy were studied using scanning Auger electron spectroscopy. Microhardness measurement and elemental depth profiles by Auger spectroscopy reveal that the carbide, Fe₃AlC_0.69, is the major constituent of the interdendritic region, while dendrites are predominantly Fe₃Al phase. Between the two, the interdendritic region is found to be more prone to oxidation than the dendritic region, which was attributed to presence of carbides with low-Al content. In spite of the difference in oxide film thickness exhibited by both the phases, they consist of an inner aluminium oxide layer and an outer iron oxide layer.     

A study of global vs. local properties for maleic anhydride modified polypropylene nanocomposites

Nanoindentation of organomodified clay filled maleated polypropylene (MAPP) was investigated. The study aims to identify the relative increase in local stiffness in comparison to the increase in mechanical properties of the bulk in polypropylene-based nanocomposites. Such a study allows one to assess confined material property in addition to increased filler volume at the local scale. A mixture of highly intercalated and well exfoliated clay structures, when dispersed in MAPP matrix, was observed under transmission electron microscopy. The degree of exfoliation was found to increase with clay loading, which was attributed to the higher viscosity and mechanical shear forces during melt compounding. Instrumented indentation was performed on (1) clay aggregate supported by MAPP matrix, (2) clay-matrix boundary, and (3) the MAPP matrix. The clay aggregated region generally showed higher stiffness as compared to the matrix. And, the relative increase in indentation stiffness is substantially higher than the relative increase in tensile and compressive stiffnesses for clay reinforced systems. Polymer chain confinement and topological constraint appeared to be operative to enhance local stiffness in the clay aggregated region. Good correlation was, however, obtained between the change in macroscopic stiffness and the change in highly local indentation stiffness as a result of clay reinforcement.     

Prediction of burning rate of coal in fluidized-bed combustion

A theory has been proposed to evaluate the burning rate of a single carbon particle in a continuously operated coal-fired fluidized bed. Experimental verification was carried out in a laboratory scale 200 mm × 200 mm combustor. The burning rate increases with the increase of the fluidization velocity and the size of the bed material. The predicted data on burning rate agree fairly well with the experimental values. The gas concentration in the bed and freeboard has also been measured and it is seen that the consumption of oxygen mostly takes place in the bed.     

Enhanced Photocatalytic and Antibacterial Activities of ZnSe Nanoparticles

Water and microbial contamination is a serious issues to aquatic system and human health. The metal selenide has a tremendous technique to degrade the dyes and bacteria.The present work reports the synthesis of ZnSe nanoparticles in a simple co-precipitation method. The synthesized samples were analyzed by structural, optical, morphological, catalytic and biological activity. The size and bandgap by annealing temperature tuning which are confirm by X-ray Diffraction and UV–Visible spectrometer. The quasi-spherical shapes were confirmed by Scanning Electron Microscope and Transmission Electron Microscope.The photo excited electrons have trapped the metals and promoting the degradation system. The release of ions to the surface was acknowledged by Photo Luminescence spectroscopy. The photocatalytic dye degradation of the Methyl Orange showed that the enhanced activity in high temperature. The photocatalytic dye degradation activity suggested that the temperature change the production of free radicals and ROS formation. The hydroxyl radicals were slewing the dye molecules and bacteria. The obtained results giving the information of ZnSe nanoparticles are one of the fascinating research areas in the current research world. Because of its large application in different field it acts as a promoting catalytic and biological application.

Graphical Abstract

     

Short‐beam three‐point bend test study in syntactic foam. Part III: Effects of interface modification on strength and fractographic features

Syntactic foam slabs having uncoated microballoons and paraffin oil surface‐treated microballoons were fabricated and tested for short‐beam three‐point bend test. The work points to the role of paraffin oil coating first weakening the interface between the microballoons and the matrix and hence lowering the efficiency of load transfer from matrix to the fillers (i.e., microballoons). This led to an overall decrement of 71% in the experimentally measured strength value compared to the deduced value for uncoated microballoons' specimens. The large strengths for uncoated microballoons specimens can be traced to the presence of the curvilinear marks in the matrix that, incidentally, are absent in the case of paraffin oil coated specimens. These observations are revealed distinctly in the microscopy of test‐failed specimens. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 687–693, 2005