Dielectric behavior of PVDF/POMA blends that have a low doped POMA content

The real (ε′) and imaginary (ε″) components of the complex permittivity of blends of PVDF [poly(vinylidene fluoride)] with POMA [poly(o‐methoxyaniline)] doped with toluenosulfonic acid (TSA) containing 1, 2.5, and 5 wt % POMA–TSA were determined in the frequency interval between 10² and 3 × 10⁶ Hz and in the temperature range from ?120 up to 120°C. It was observed that the values of ε′ and ε″ had a greater increase with the POMA–TSA content and with a temperature in the region of frequencies below 10 kHz. This effect decreased with frequency and it was attributed to interfacial polarization. This polarization was caused by the blend heterogeneity, formed by conductive POMA–TSA agglomerates dispersed in an insulating matrix of PVDF. The equation of Maxwell–Garnett, modified by Cohen, was used to evaluate the permittivity and conductivity behavior of POMA–TSA in the blends. A strong decrease was observed in POMA–TSA conductivity in the blend, which was bigger the lower the POMA–TSA content in the blend. This decrease could have been caused either by the POMA dedoping during the blend preparation process or by its dispersion into the insulating matrix. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 752–758, 2003     

Evolutionary robustness analysis for multi-objective optimization: benchmark problems

This paper presents a new approach to robustness analysis in multi-objective optimization problems aimed at obtaining the most robust Pareto front solutions and distributing the solutions along the most robust regions of the optimal Pareto set. A new set of test problems accounting for the different types of robustness cases is presented in this study. Non-dominated solutions are classified according to their degree of robustness and are distributed along the Pareto front according to specific algorithm parameter values. Verification of the proposed method is carried out using the developed test problems and artificial and real world benchmark test problems present in the literature.     

Comparative study of homogeneous and heterogeneous styrene polymerizations with Ni(acac)2/MAO catalytic system

Styrene polymerization was carried out with Ni(acac)₂/MAO and Ni(acac)₂/SiO₂/MAO. The influence of reaction parameters (Al/Ni mole ratio, catalyst concentration, temperature and time polymerization) on styrene polymerization was evaluated. It was observed that both catalytic systems were affected by reaction parameters and that the heterogeneous catalyst presented higher activity than the homogeneous one. Polystyrenes with different molecular weight, stereoregularity and polydispersity were obtained. These results suggest that different active catalyst species could have been present. In addition, two types of methylaluminoxane (MAO) with different molecular weights were also evaluated as cocatalyst. As a result, the catalyst activity and stereospecificity were strongly affected by the MAO type.     

Update on the pharmacology of Spirulina (Arthrospira), an unconventional food

Spirulina (Arthrospira), a filamentous, unicellular alga, is a cyanobacterium grown in certain countries as food for human and animal consumption. It is also used to derive additives in pharmaceuticals and foods. This alga is a rich source of proteins, vitamins, amino acids, minerals, and other nutrients. Its main use, therefore, is as a food supplement. Over the last few years, however, it has been found to have many additional pharmacological properties. Thus, it has been experimentally proven, in vivo and in vitro that it is effective to treat certain allergies, anemia, cancer, hepatotoxicity, viral and cardiovascular diseases, hyperglycemia, hyperlipidemia, immunodeficiency, and inflammatory processes, among others. Several of these activities are attributed to Spirulina itself or to some of its components including fatty acids omega-3 or omega-6, beta-carotene, alpha-tocopherol, phycocyanin, phenol compounds, and a recently isolated complex, Ca-Spirulan (Ca-SP). This paper aims to update and critically review the results published over the last few years with regards to these properties. The conclusion is that even if this cyanobacterium has been one of the most extensively studied from the chemical, pharmacological and toxicological points of view, it is still necessary to expand the research in order to have more consistent data for its possible use in human beings.     

Obtaining condensed milk from a mixture of hydrosoluble extract of soybean powder and cow's milk]

Three formulations of mix concentrated milk with hydrosolubles extract of soybean powder and cow's milk were prepared. The products were condensed up to 31% and 33.65% of solids in a vacuum evaporator at temperature of 45 degrees and 58 degrees C with a vacuum pressure of 540 mmHg. The products obtained were compared with standard concentrated milk through sensory evaluation showing satisfactory characteristics.     

Ceramic Microtubes from Preceramic Polymers

A novel process for the production of ceramic microtubes involving the microextrusion of preceramic polymers was studied. Microtubes with a wide range of inner and outer diameters and several centimeters long were produced from two silicone resins. A coextrusion approach was also used to extend the forming capability of the technique. The addition of carbon black resulted in electrically conductive silicon oxycarbide (SiOC) ceramic microtubes. SiOC microtubes possessed a high bending strength, ranging from ∼30–1100 MPa.     

Boundary scan test,test methodology,and fault modeling

The test technique called boundary scan test (BST) offers new opportunities in testing but confronts users with new problems too. The implementation of BST in a chip has become an IEEE standard and users on board level are the next group to begin thinking about using the new possibilities. This article addresses some of the questions about changes in board-level testing and fault diagnosis. The fault model itself is also affected by using BST. Trivial items are extended with more sophisticated details in order to complete the fault model. Finally, BST appears to be a test technique that offers a high degree of detectability on board level, but for diagnosis, some additional effort has to be made.     

An investigation of the synergistic effect between magnetite nanoparticles and polypyrrole in nanostructured layer-by-layer films

In this paper, we report the controlled fabrication of layer-by-layer (LbL) films deposited on gold substrates with three different supramolecular architectures using polypyrrole (Ppy) and magnetite nanoparticles (Fe₃O₄-np), besides conventional poly(allylamine hydrochloride) (PAH) e poly(vinyl sulfonic acid) (PVS) polyelectrolytes, demonstrating the synergistic effect between Ppy and Fe₃O₄-np such as a result of their interaction. Modified gold electrodes were analyzed by contact angle (wettability), surface plasmon resonance (SPR), raman spectroscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. The (Fe₃O₄-np/Ppy)₃ architecture was also evaluated by scanning electron microscopy. The modified gold electrodes present more homogeneous covering, higher electron transfer and a decrease of resistance with the incorporation of the nanostructured materials such as Ppy and Fe₃O₄-np forming (Fe₃O₄-np/Ppy)₃ LbL film. The results carried out in this study suggest that the (Fe₃O₄-np/Ppy)₃ LbL film can be applied as a possible electrochemical or optical non-enzymatic sensor for analytical detection.     

Antistatic packaging based on PTT/PTT-g-MA/ABS/MWCNT nanocomposites: Effect of the chemical functionalization of MWCNTs

Polymer/carbon nanotube nanocomposites have attracted high interest for a wide spectrum of applications, including antistatic packaging used to protect electronic devices against electrostatic discharge. Polytrimethylene terephthalate (PTT)/maleic-anhydride-grafted PTT (PTT-g-MA)/acrylonitrile butadiene styrene (ABS) blend-based multiwall carbon nanotubes (MWCNTs) nanocomposites were prepared through extrusion. It was conducted chemical functionalization on the MWCNTs by oxidation using nitric acid to introduce functional groups. The effect of the amount (0.5 or 1.0 wt%) and functionalization of MWCNTs on the nanocomposites was investigated. Despite the poor barrier properties of PTT/PTT-g-MA/ABS/MWCNT nanocomposites due to the presence of voids confirmed by scanning electron microscopy (SEM), the nanocomposites with functionalized MWCNT (MWCNTf) showed excellent barrier properties, indicating that the functionalization process improved the interaction between the MWCNTs and the matrix. The addition of MWCNTs into PTT/PTT-g-MA/ABS blend decreased the electrical resistivity by eight orders of magnitude. The use of MWCNTf may still disrupt the electrical network pathway and slightly decreasing the electrical resistivity, but the nanocomposites present the desired properties required for antistatic packaging.     

The corrosion of mild steel in simulated SO2 containing atmospheres

Electrochemical tests were carried out on steel/steel multi-laminar cells under thin layers of sulphate solution simulating atmospheres with contents of 20, 50 and 75 μg m⁻³ of SO₂ and a relative humidity of 85%. Measurements of the current flowing between the two electrodes of the cell vs drying time and impedance measurements for different times were taken. Potentiodynamic cathodic polarization plots were also obtained for one concentration of contaminant at various drying times using three electrode multi-laminar cells. The results showed that the multi-laminar cells allowed the drying process of the thin electrolyte films to be followed. The use of electrochemical techniques gave information on the kinetics and mechanism of the corrosion process occurring during the drying period. Initially the process is controlled by oxygen diffusion through the liquid film, but for longer periods the control changes to the anodic reaction.