Enzyme-linked immunosorvent assay using vertical microreactor stack with microbeads

The advantages of vertical microreactor stack with three-dimensional (3D) structure for immunoassay are discussed. The vertical microreactor stack uses vertical fluid flow operation with multifunctional fluid filters. The multi function of fluid filter is very effective for micromixing and passive valve operation. The mechanism of micromixing is discussed by using computational fluid dynamics (CFD), and we know that the mixing mechanism based on Coanda effect. To evaluate the micromixing performance of fluid filter, we demonstrated enzyme reaction with unique repeat mixing operation. As the results, we proved that the fluid filter has very effective mixing performance. The detection limit, which demonstrated by competition enzyme-linked immunosorvent assay (ELISA), is comparable with recommended detection limit, which suggested by Japanese ministry for the environment.     

Superconductivity and spin correlation study by Fe3+ - ESR in (La1−xSrx)2Cu1−yFeyO4−z

Fe³⁺-ESR measurements are carried out for the samples of (La_1–xSr_x)₂Cu_1–yFe_yO_4–z. Peak-peak width H_pp of the signals decreases with falling temperature until minimum value and rises sharply with further decreasing temperature, which is approximated by H_pp = C₀ +C₁/T + BT. The H_pp behavior at high temperature and at low temperature can be analyzed by Korringa mechanism and slowing down of Fe₃₊ spin fluctuation, respectively. From the analysis of coefficient B's of Korringa terms, C₀ and g-shift, it is revealed that the magnetic interaction of Fe³⁺ with hole carriers and Ce²⁺ spins depends strongly on hole density.     

38. R&D on hydrogen production by high-temperature electrolysis of steam

One of the objectives of the high-temperature engineering test reactor (HTTR) is to demonstrate the effectiveness of high-temperature nuclear heat utilization, which aims to extend the application of nuclear heat to non-electric fields, especially to hydrogen production. As part of the development of the hydrogen production processes, laboratory-scale experiments of a high-temperature electrolysis of steam (HTES) had been carried out with a practical electrolysis tube with 12 solid-oxide cells connected in series. Using this electrolysis tube, hydrogen was produced at the maximum density of 44 N cm³/cm² h at a electrolysis temperature of 950 °C. Thereafter, to improve hydrogen production performance, a self-supporting planar electrolysis cell with a practical size (80 mm × 80 mm of electrolysis area) was fabricated. In the preliminary electrolysis experiment carried out at 850 °C, the planar cell produced hydrogen at the maximum density of 38 N cm³/cm² h, and the energy efficiency was almost as high as that obtained with the electrolysis tube at 950 °C. However, both electrolysis tubes and planar cells did not keep their integrity in one thermal cycle. Durability of the solid-oxide cell against the thermal cycle is one of the key issues of HTES.     

Shape memory properties of polypeptide hydrogels having hydrophobic alkyl side chains

Polypeptide hydrogels were prepared by cross-linking of hydrophobically-modified poly[N⁵-(2-hydroxyethyl) l-glutamine] having alkyl side chains –C_nH_2n+1. Chain length of the alkyl group was n = 8, 16, and 18, and their mole fractions in the polypeptide were varied in the range of 0.05–0.16. Shape memory ability of the prepared polypeptide hydrogels was investigated. After deformation at 60 °C, the hydrogel was cooled in order to fix the temporary deformed shape. It was found that crystallization of the alkyl side chains did not occur, and the fixation ability of the hydrogel at 0 °C was low. In the subsequent heating process, the deformed temporary shape spontaneously recovered to the original shape gradually with increasing temperature, in other words, the shape recovery ratio varied with depending on the recovery temperature. From these observations, it was proposed that the shape fixation of the polypeptide hydrogel was achieved by strong segregation of the hydrophobic alkyl chains at low temperature, and the shape recovery of the deformed hydrogel was accompanied by the gradual decrease of the segregation strength with the temperature increase.     

Measurement of High-Temperature Elastic Properties of Ceramics Using a Laser Ultrasonic Method

Young's modulus and Poisson's ratio of SiC ceramics at temperatures >1400°C were obtained using a laser ultrasonics method that included a Fabry-Pérot interferometer (LUFP). At temperatures <1000°C, Young's modulus and Poisson's ratio measured using the LUFP method agreed well with those measured using standard contact methods, such as the resonance method and the ultrasonic pulse method. These results showed that the LUFP method is a powerful tool for measuring high-temperature elastic properties of advanced ceramics in a noncontact manner.     

A classification control strategy for energy storage system in microgrid

Storage devices are indispensable elements in a microgrid to compensate for the power imbalance between loads and the distributed generator (DG) output. Different storage strategies give diverse performances in adjustment speed and capacity. Based on the performance of different storage devices and the features of power imbalance curve in different periods, a classification control strategy is proposed in this paper. First, storage devices are given priorities according to the adjusting speed, and the power imbalance curve is divided into two periods according to the changing speed. During an emergency, all the storages are employed to compensate the rapidly increasing power imbalance; during the steady period, storage device with higher priority is employed to track the instantaneous component of power imbalance, while storage device with lower priority is used to replace the kWh output of higher priority storage. The proposed strategy is tested in a microgrid within the subdistribution network of IEEE RBTS Bus6 system using Monte Carlo methods. Simulation results indicate that the classification control strategy could endow the system with fast adjusting ability through coordination between storages. Reliability indices of the testing system are utilized to demonstrate that the classification control strategy could improve the stability of the microgrid and reliability of the distribution network. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Therapeutic Targets and Emerging Treatments in Advanced Chondrosarcoma

Simple SummaryChondrosarcomas develop chemoresistance to standard anticancer drugs, making it difficult to control unresectable or metastatic chondrosarcomas. To improve the clinical outcomes of chondrosarcoma, new treatment approaches, such as molecule-targeting agents and immunotherapy, are needed. Recent research has revealed promising biomarkers and therapeutic targets for chondrosarcoma. In addition, several molecule-targeting agents have shown favorable antitumor activities in several clinical studies in patients with advanced sarcomas, including chondrosarcoma. This review summarizes recent basic studies on biomarkers and therapeutic targets and recent clinical studies on treating chondrosarcomas.AbstractDue to resistance to standard anticancer agents, it is difficult to control the disease progression in patients with metastatic or unresectable chondrosarcoma. Novel therapeutic approaches, such as molecule-targeting drugs and immunotherapy, are required to improve clinical outcomes in patients with advanced chondrosarcoma. Recent studies have suggested several promising biomarkers and therapeutic targets for chondrosarcoma, including IDH1/2 and COL2A1. Several molecule-targeting agents and immunotherapies have shown favorable antitumor activity in clinical studies in patients with advanced chondrosarcomas. This review summarizes recent basic studies on biomarkers and molecular targets and recent clinical studies on the treatment of chondrosarcomas.     

Perpendicular oriented cylinders via directional coalescence of spheres embedded in block copolymer films induced by solvent annealing

Polystyrene-b-poly(methyl acrylate) (PS-b-PMA) block copolymer with PS volume fraction of 25.2 vol% was synthesized by atom transfer radical polymerization. Non-pretreated silicon wafers were used as the substrates to prepare perpendicular oriented PS cylinders in PMA matrix via solvent annealing which could induce the transformation of spheres to vertically oriented and hexagonally packed cylinders. The spherical microdomains were formed after the evaporation of solvents from the solutions of the block copolymer in selective solvents mixed from methanol, acetone and dichloromethane. The thickness of films could be as thick as 1000 nm, which were much thicker than usual cases and the cylinders came from the directional coalescence of the spheres, thus any pre-treatments of the substrates were not required for perpendicular orientation. The structures were characterized by small angle X-ray scattering (SAXS), transmission electron microscope (TEM), atom force microscopy (AFM) and grazing incidence small angle X-ray scattering (GISAXS).     

Consideration of multi‐coil type magnetization system for magnetic particle testing of omnidirectional crack in all surfaces of 3D shape test object

Mechanical parts, plants, and cross‐linkages inspected with magnetic‐particle testing (MT) are typically complex 3D shapes. In complex 3D shape portions, because a magnetizer often cannot be configured to inspection portions and the test object cannot be appropriately magnetized, there is a possibility of overlooking a crack in such an instance. Thus, MT system development that was successfully able to detect omnidirectional cracks in 3D shape portions was considered in this study's trials. Two multi‐coil type magnetizers were hence arranged face‐to‐face, and the magnetization of omnidirectional scenarios for all surfaces of 3D shape test object was evaluated.     

Efficient synthesis of nonnatural mutants in Escherichia coli S30 in vitro protein synthesizing system

Factors that affect the efficiency of in vitro synthesis of mutant proteins that contain nonnatural amino acids were investigated. The process of the nonnatural mutagenesis consists of chemical aminoacylation of a tRNA that contains a 4-base anticodon, followed by in vitro synthesis in the presence of an mRNA that contains the corresponding 4-base codon. Detailed studies on the time courses of the synthesis revealed two major factors that suppress the yield of nonnatural mutants compared with the wild-type protein. First, a cyclic tRNA that exists as a by-product of the chemical aminoacylation inhibits the protein synthesis. Second, the very short lifetime of a tRNA aminoacylated with a nonnatural amino acid limits the protein yield. As a simple and practical way of surmounting these factors, aminoacyl tRNA was added into the in vitro system at 5 min after the start of the synthesis. The addition increased the protein yield up to the level of conventional proteins in the in vitro system.