Temperature Dependence of KIC for High-Pressure Hot-Pressed Si3N4 Without Additives

Temperature dependence of K_IC values for Si₃N₄ bodies sintered at high pressures without additives was studied from room temperature to 1400°C. Little change in K_K was found in this range.     

Hydrothermal Formation of Hydroxyapatite Layers on the Surface of Type-A Zeolite

Type-A zeolite evenly covered with hydroxyapatite thin layers was prepared using hydrothermal treatment at 120°C for 8 h under autogenous pressure. The hydroxyapatite needlelike nanocrystals, 100–200 nm in diameter and 30 nm in thickness, were grown under the reaction between discharged Ca²⁺ ions from type-A zeolite and PO₄³⁻ ions in (NH₄)₃PO₄ solution. The preferential orientations of the c -axis of hydroxyapatite crystals perpendicular to a zeolite surface were observed using transmission electron microscopy. The crystal structure of type-A zeolite was not destroyed under the reaction, but the surface morphology was changed only with complete covering of scaly hydroxyapatite particles.     

Preparation of highly crystalline nanofibers on Fe and Fe-Ni catalysts with a variety of graphene plane alignments

The present study confirmed that highly crystalline nanofibers with controlled structure may be prepared over Fe and Fe-Ni alloy catalysts. The degree of graphitization of various carbon nanofibers (CNFs) was analyzed by using C(0 0 2) peaks from the XRD profiles. The C(0 0 2) peaks of CNFs over Fe catalyst shifted to higher angle and became narrower as the preparation temperature increased from 560 to 620 °C. Tubular CNFs prepared at temperature higher than 630 °C showed lower 2θ angles compared to those of platelet fibers. CNFs prepared over Fe-Ni catalysts tended to resemble those prepared over Fe catalysts. The degree of graphitization of platelet CNFs resembled natural graphite, while d_0 0 2 of the tubular CNFs showed values below the 3.39 Å reported as a theoretical minimum for a cylindrical alignment. Lc_0 0 2 of platelet and tubular CNFs increased by heat treatment at 2000 and 2800 °C though d_0 0 2 changed little. A transverse section of platelet and tubular CNFs had a hexagonal shape, not a round shape. The hexagonal column allows AB stacking of hexagonal planes that can give perfect hexagonal alignment.     

What is "special" about face perception?

There is growing evidence that face recognition is "special" but less certainty concerning the way in which it is special. The authors review and compare previous proposals and their own more recent hypothesis, that faces are recognized "holistically" (i.e., using relatively less part decomposition than other types of objects). This hypothesis, which can account for a variety of data from experiments on face memory, was tested with 4 new experiments on face perception. A selective attention paradigm and a masking paradigm were used to compare the perception of faces with the perception of inverted faces, words, and houses. Evidence was found of relatively less part-based shape representation for faces. The literatures on machine vision and single unit recording in monkey temporal cortex are also reviewed for converging evidence on face representation. The neuropsychological literature is reviewed for-evidence on the question of whether face representation differs in degree or kind from the representation of other types of objects.     

Cathodic Stripping Voltammetry of Selenium(IV) at a Silver Disk Electrode

A new, simple, and reproducible method is described for the determination of selenium(IV) based on differential pulse cathodic stripping voltammetry. The optimized experimental conditions are as follows: selenium(IV) ions in an acidic medium (0.06 M HCl-0.07 M HNO(3)) are electrodeposited on a rotating silver disk electrode as silver selenide at -0.4 V vs SCE for 30 min; the deposit is then cathodically stripped in another solution (2 M NaOH) at a scan rate of 50 mV s(-1) to -1.2 V vs SCE. The cathodic stripping results in only a single well-defined peak at about -0.95 V vs SCE. The calibration (peak height vs selenium concentration) graph is linear up to at least 40 ng mL(-1) of selenium(IV) and passes through the origin, with a relative standard deviation of 2.7% for 20 ng mL(-1) (n = 5). The detection limit (3σ) is 0.20 ng mL(-1). The possible interferences have been evaluated. Dissolved oxygen does not affect the peak height of selenium. The electrode can be used repeatedly at least 20 times with excellent reproducibility without further polishing. The proposed method is an improvement over the existing cathodic stripping techniques.     

Randomly accessible, multilayered optical memory with a Bi(12)SiO(20) crystal

A read-and-write, randomly accessible, multilayered optical memory with a Bi(12) SiO(20) crystal as the medium is demonstrated. Data are recorded in the crystal as an absorption change that is due to the photochromic effect. These data are successfully recorded, read, and selectively erased in five layers in the crystal. The axial-separation distance between neighboring layers is 30 μm, and the lateral distance between bits is 5 μm. Selective bit erasure of the data is accomplished by illumination of the recorded bit datum with He-Ne laser light. To our knowledge, this is the first successful demonstration of the selective optical erasure of the photochromic effect in a BSO crystal.     

A cross-junction channel valveless-micropump with PZT actuation

A gas-jet micro pump with novel cross-junction channel has been designed and fabricated using a Si micromachining process. The valveless micro pump is composed of a piezoelectric lead zirconate titanate (PZT) diaphragm actuator and fluidic network. The design of the valveless pump focuses on a cross-junction formed by the neck of the pump chamber and one outlet and two opposite inlet channels. The structure of cross-junction allows differences in fluidic resistance and fluidic momentum inside the channels during each PZT diaphragm vibration cycle, which leads to the gas flow being rectified without valves. The flow channels were easily fabricated by using silicon etching process. To investigate the effects of the structure of the cross-junction on the gas flow rate, two types of pump with different cross-junction were studied. The design and simulation were done using ANSYS-Fluent software. The simulations and experimental data revealed that the step-nozzle structure is much more advantageous than the planar structure. A flow rate of 5.2 ml/min was obtained for the pump with step structure when the pump was driven at its resonant frequency of 7.9 kHz by a sinusoidal voltage of 50 V_p–p.     

Fundamental characteristics of printed gelatin utilizing micro 3D printer

Gelatin is useful for biofabrication, because it can be used for cell scaffolds and it has unique properties. Therefore, we attempted to fabricate biodevices of gelatin utilizing micro 3D printer which is able to print with high precision. However, it has been difficult to fabricate 3D structure of gelatin utilizing 3D printer, because a printed gelatin droplet on the metal plate electrode would spread before solidification. To clear this problem, we developed a new experimental set-up with a peltier device that can control temperature of the impact point. At an impact point temperature of 80 °C, the spreading of printed gelatin droplets was prevented. Therefore, we were able to print a ball gelatin. In addition, we were able to print a narrower gelatin line than at an impact point temperature of 20 °C.     

A query model to synthesize answer intervals from indexed videounits

While a query result in a traditional database is a subset of the database, in a video database, it is a set of subintervals extracted from the raw video sequence. It is very hard, if not impossible, to predetermine all the queries that will be issued in the future, and all the subintervals that will become necessary to answer them. As a result, conventional query frameworks are not applicable to video databases. We propose a new video query model that computes query results by dynamically synthesizing needed subintervals from fragmentary indexed intervals in the database. We introduce new interval operations required for that computation. We also propose methods to compute relative relevance of synthesized intervals to a given query. A query result is a list of synthesized intervals sorted in the order of their degree of relevance