Multi-step precipitation separation system using mixture of thermosensitive polymers

Summary Multi-step precipitation separation system was developed by using aqueous mixtures of some thermosensitive polymers. The following three polymers were used here; poly(N-n-propylacrylamide), poly(N-isopropylacrylamide), and poly(N-isopropylmethacrylamide). A mixture of the three polymers showed three endothermic peaks, and the peak top temperatures were almost consistent with that of the each polymer solution. The polymers were purified by thermal precipitation to obtain fractions which can respond in narrow temperature ranges prior to use. In the case of the precipitation separation of two polymers mixtures, purities of the obtained precipitate and supernatant fractions became high comparing with the case in which the unpurified polymers were used. Parts of the polymers which were not the precipitation targets were also precipitated by the separation procedures. This was caused not only by insolubilization of the non-targeted polymers due to their phase transitions but also by their non-specific entanglement with the targeted polymers. The purities of the fractions also improved when the difference of the phase transition temperature between two polymers was large enough to avoid the coprecipitation. In the case of the precipitation separation of mixtures of the three polymers, purities of each fraction also improved when the purified polymers were used.     

Preparation of super-hydrophobic surface on biodegradable polymer by transcribing microscopic pattern of water-repellent leaf

Super-hydrophobic surface has been prepared onto biodegradable polymer by a combination of transcribing microscopic structure of a water-repellent leaf and a chemical treatment. An aroid leaf has been chosen for the preparation of the super-hydrophobic surface since the leaf has concavity microscopic structure, which is easy to handle for a material use. The microscopic pattern was transcribed onto poly(ε-caprolactone) (PCL) sheet by using replica method, then it was further treated by soaking in a mixture of acetone/methanol solution. The resultant PCL having the microscopic concavity pattern showed high water contact angle of 148° and also showed antibacterial property for filamentous fungi.     

Activation of a Au/TiO2 Catalyst by Loading a Large Amount of Fe–Oxide: Oxidation of CO Enhanced by H2 and H2O

Catalytic activity of a 1 wt% Au/TiO₂ catalyst is markedly improved by loading a large amount of FeO_x, on which the oxidation of CO in excess H₂ is selectively promoted at temperature lower than 60 °C. Oxidation of CO with O₂ on the FeO_x/Au/TiO₂ catalyst is markedly enhanced by H₂, and H₂O moisture also enhances the oxidation of CO but its effect is not so large as the promotion by H₂. We deduced that activation of Au/TiO₂ catalyst by loading FeO_x is not caused by the size effect of Au particles but a new reaction path via hydroxyl carbonyl intermediate is responsible for the superior activity of the FeO_x/Au/TiO₂ catalyst.     

Narrow multi-walled carbon nanotubes produced by chemical vapor deposition using graphene layer encapsulated catalytic metal particles

The use of graphene layer encapsulated catalytic metal particles for the growth of narrower multi-walled carbon nanotubes (MWCNTs) has been studied using plasma-enhanced chemical vapor deposition and conventional thermal CVD. Ni–C or Fe–C composite nanoclusters were fabricated using the dc arc discharge technique with metal–graphite composite electrodes carrying a current of 100–200 A in a stainless-steel chamber filled with He and CH₄ mixture gas at 27 kPa. Nano-sized grains with diameters less than 10 nm were fabricated and deposited on a Si substrate, and were used as a catalyst for MWCNT growth. Structural analyses of the composite nanoclusters and MWCNTs were carried out using transmission electron microscopy. The results show that the diameters of the MWCNTs were reduced from 50–100 nm for a conventional Ni thin film-evaporated Si substrate to a minimum of roughly 2–4 nm in the present study.     

Synthesis and properties of novel side-chain-sulfonated polyimides from bis[4-(4-aminophenoxy)-2-(3-sulfobenzoyl)]phenyl sulfone

A novel side-chain-sulfonated aromatic diamine of bis[4-(4-aminophenoxy)-2-(3-sulfobenzoyl)]phenyl sulfone (BAPSBPS) was synthesized. Sulfonated copolyimides were synthesized by random and sequenced block copolymerization of 1,4,5,8-naphthalene tetracarboxylic dianhydride, BAPSBPS and nonsulfonated diamine. They displayed good solubility in common aprotic solvents and high desulfonation temperature of 350 °C, suggesting the high stability of sulfonic acid groups. The reduced viscosity was in the range of 0.4-1.8 dl/g at 0.5 g/dl and 35 °C. Flexible and tough membranes with reasonably high mechanical strength were prepared. They showed anisotropic membrane swelling with larger swelling in thickness than in plane. They displayed reasonably high proton conductivity (σ), taking their lower ion exchanging capacity (IEC) into account. For example, the membrane with IEC of 1.54 mequiv/g showed σ values of 81 and 11 mS/cm in water and 70% RH, respectively, at 60 °C.     

水相酶促酯化法拆分dl－薄荷醇的连续操作

对影响脂肪酶活性、稳定性和对映选择性的因素，如有机溶剂和反应温度等首先进行了优化。其次，使用悬浮于环已烷的粉末状游离脂肪酶（ＣａｎｄｉｄａｃｙｌｉｎｄｒａｃｅａｌｉｐａｓｅＯＦ３６０）作生物催化剂，成功地构建了一个高效的非水相游离酶连续搅拌釜反应器。当使用高度反应性的丙酸酐作为薄荷醇的酰基给体，进行连续的酶促对映选择性酯化反应时，醇的转化率在两周内可保持４０％以上，所生成酯的光学纯度超过９５％ｅ．ｅ。但是，当使用相应的游离丙酸（而不是酸酐）作酰基给体时，薄荷醇的转化率在连续操作开始后迅速下降，表明使用酸酐时的生产力要比使用游离酸时高。最后，对底物溶液的浓度和流速进行了进一步优化；同时对反应器系统的含水量进行了监测，并通过对酸酐料液的浓度或流速进行微调的方法，有效地将有机溶液相的水分浓度控制在一定的范围（２～４ｍｍｏｌ／Ｌ）之内，结果，ｄｌ－薄荷醇对映选择性连续酯化反应非常稳定地运行了两个月之久（转化率４７～３５％，光学纯度９５～９８％ｅ．ｅ．），酶反应器的半衰期超过２００天。     

Oxidation products of cyanidin 3-O-β-d-glucoside with a free radical initiator

Recently, we have reported that anthocyanins show strong antioxidative activity, but no attention has been paid to anthocyanins from the viewpoint of the reaction mechanism of alkylperoxyl radicals; therefore, we investigated the reaction products of antioxidative anthocyanins (cyanidin 3-O-β-d-glucoside). Cyanidin 3-O-β-d-glucoside was reacted with 2,2′-azobis(2,4-dimet hylvaleronitrile) to generate the alkylperoxyl radicals, and the reaction products were isolated by high-performance liquid chromatography. The products were identified as 4,6-dihydroxy-2-O-β-d-glucosyl-3-oxo-2,3-dihydrobenzofuran and protocatechuic acid. Based on reaction products, the antioxidative mechanism of cyanidin 3-O-β-d-glucoside may be different from that of α-tocopherol; cyanidin 3-O-β-d-glucoside would produce another radical scavenger, as it would break down the structure and scavenge the radicals.     

Effects of growth temperature on the fatty acid composition of the free-living nematodeCaenorhabditis elegans

The effects of growth temperature on the fatty acid compositions of the phosphatidylcholine (PC), phosphatidylethanolamine (PE), and total lipid (TL) fractions of the free-living nematodeCaenorhabditis elegans were investigated. A reduction in growth temperature from 25 to 15°C caused the proportions of eicosapentaenoic acid (20∶5n-3) to increase from 23.6 to 32.5% in the PC, from 7.4 to 10.8% in the PE, and from 12.9 to 19.9% in the TL fractions. Conversely, the levels of dihomo-γ-linolenic acid (20∶3n-6) and arachidonic acid (20∶4n-6) in these phospholipid fractions and the TL fraction both decreased with decreasing growth temperature. Analysis of the positional distribution of fatty acids in the PC fraction revealed that the change in the composition of C₂₀ polyunsaturated fatty acid was obvious in positionsn-2. Lowering the growth temperature induced an increase in the level of the diacyl subclass of PE from 58% at 25°C to 71% at 15°C, with a concomitant decrease in the levels of the alkylacyl and alkenylacyl subclass of PE ofC. elegans. These changes observed in the phospholipids ofC. elegans might be one mechanism for adaptation to low temperature. Lipids 31, 1173–1178 (1996).     

Microstructure of TiO2 and ZnO Films Fabricated by the Sol-Gel Method

Titanium dioxide and zinc oxide films were fabricated by spin-on and dip-coating methods. Both types of films exhibited columnar grains when the single coating was thin, ∼10 nm. The columnar TiO₂ films were dense, as confirmed by their density values calculated from the refractive index and TEM results. The addition of Al cations into the ZnO suppressed grain growth, because Zn had a lower diffusivity in the doped films. The doped ZnO films had nearly the same electrical resistivity as that of the undoped films.