Finite Element Analysis of 2.5D Woven Composites,Part I: Microstructure and 3D Finite Element Model

A new parameterized finite element model, called the Full-cell model, has been established based on the practical microstructure of 2.5D angle-interlock woven composites. This model considering the surface layer structure can predict the mechanical properties and estimate the structural performance such as the fiber volume fraction and inclination angle. According to introducing a set of periodic boundary condition, a reasonable overall stress field and periodic deformation are obtained. Furthermore, the model investigates the relationships among the woven parameters and elastic moduli, and shows the structural variation along with the corresponding woven parameters. Comparing the results calculated by FEM with the experiments, the veracity of calculation and reasonability based on the Full-cell model are confirmed. In the meantime, the predicted results based on the Full-cell model are more closed to the test results compared to those based on the Inner-cell model.     

Modeling the Tensile Strength of Carbon Fiber − Reinforced Ceramic − Matrix Composites Under Multiple Fatigue Loading

An analytical method has been developed to investigate the effect of interface wear on the tensile strength of carbon fiber ? reinforced ceramic ? matrix composites (CMCs) under multiple fatigue loading. The Budiansky ? Hutchinson ? Evans shear ? lag model was used to describe the micro stress field of the damaged composite considering fibers failure and the difference existed in the new and original interface debonded region. The statistical matrix multicracking model and fracture mechanics interface debonding criterion were used to determine the matrix crack spacing and interface debonded length. The interface shear stress degradation model and fibers strength degradation model have been adopted to analyze the interface wear effect on the tensile strength of the composite subjected to multiple fatigue loading. Under tensile loading, the fibers failure probabilities were determined by combining the interface wear model and fibers failure model based on the assumption that the fiber strength is subjected to two ? parameter Weibull distribution and the loads carried by broken and intact fibers satisfy the Global Load Sharing criterion. The composite can no longer support the applied load when the total loads supported by broken and intact fibers approach its maximum value. The conditions of a single matrix crack and matrix multicrackings for tensile strength corresponding to multiple fatigue peak stress levels and different cycle number have been analyzed.     

One weight $$\mathbb {Z}_2\mathbb {Z}_4$$ additive codes

We study one weight \(\mathbb {Z}_2\mathbb {Z}_4\) additive codes. It is shown that the image of an equidistant \(\mathbb {Z}_2\mathbb {Z}_4\) code is a binary equidistant code and that the image of a one weight \(\mathbb {Z}_2\mathbb {Z}_4\) additive code, with nontrivial binary part, is a linear binary one weight code. The structure and possible weights for all one weight \(\mathbb {Z}_2\mathbb {Z}_4\) additive codes are described. Additionally, a lower bound for the minimum distance of dual codes of one weight additive codes is obtained.     

Partial permutation decoding for MacDonald codes

We show how to find s-PD-sets of the minimal size \(s+1\) for the \(\left[ \frac{q^n-q^u}{q-1},n,q^{n-1}-q^{u-1}\right] _q \) MacDonald q-ary codes \(C_{n,u}(q)\) where \(n \ge 3\) and \(1 \le u \le n-1\). The construction of [6] can be used and gives s-PD-sets for s up to the bound \(\lfloor \frac{q^{n-u}-1}{(n-u)(q-1)} \rfloor -1\), of effective use for u small; for \(u \ge \lfloor \frac{n}{2} \rfloor \) an alternative construction is given that applies up to a bound that depends on the maximum size of a set of vectors in \(V_u(\mathbb {F}_q)\) with each pair of vectors distance at least 3 apart.     

A Review on InGaSb Growth under Microgravity and Terrestrial Conditions Towards Future Crystal Growth Project Using Chinese Recovery Satellite SJ-10

The paper reviewed the previous microgravity experiment using Chinese recovery satellite, the in-situ measurement of composition profile in the solution by X-ray penetration method and homogeneous growth of InGaSb by temperature freezing method under terrestrial condition for making clear the effect of gravity on the growth of InGaSb ternary alloy semiconductor crystals. The previous experimental results showed that the shape of solid/liquid interfaces and composition profile in the solution were significantly affected by gravity. Based on the previous microgravity experimental results, experimental conditions were investigated to grow homogeneous In _xGa _1?xSb with higher indium composition at Chinese recovery satellite SJ-10 in near future.     

Analysis of Non-Equilibrium Fluctuations In A Ternary Liquid Mixture

From the benchmark values of the diffusion and thermodiffusion coefficients of the tetralin, isobutylbenzene and n-dodecane ternary mixture, and the published optical contrast factors, we have evaluated the theoretical amplitudes of the two composition modes of the refractive-index fluctuations. Shadowgraph experiments have been performed on ground, where the current theory is expected to be correct only for large wave vectors. Two decay times have been observed experimentally. The fastest one being related to the thermal diffusivity of the mixture, while the slower one to mass diffusion. Hence, it has not been possible to distinguish the two eigenvalues of the mass diffusion matrix, a problem also encountered in traditional light-scattering with ternary mixtures of similar-size molecules. Thus, to compare the measured Intermediate Scattering Function with theory, we fix the amplitudes and decay rates to the benchmark values, use the wave number as a fitting parameter, and compare it to the experimental wave number. The good agreement between theory and experiments for the larger wave numbers validates the theory developed for the microgravity conditions.     

Cytosolic Calcium Concentration Changes in Neuronal Cells Under Clinorotation and in Parabolic Flight Missions

All life on earth has been established under conditions of stable gravity of 1g. Nevertheless, in numerous experiments the direct gravity dependence of biological processes has been shown on all levels of organization, from single molecules to humans. To study the effects especially of microgravity on biological systems, a variety of platforms are available, from drop towers to the ISS. Due to the costs of these platforms and their limited availability, as an alternative, numerous simulators have been developed for so called “simulated” microgravity. A classical systems is a clinostat, basically rotating a sample around one axis, and by integration of the gravity vector for 360° arguing that thus the effects of gravity are depleted. Indeed, a variety of studies has shown that taking out the direction of gravity from a biological system often results in consequences similar to the exposure of the system to real microgravity. Nevertheless, the opposite has been shown, too, and as a consequence the relevance of clinostats in microgravity research is still under discussion. To get some more insight into this problem we have constructed a small fluorescence clinostat and have studied the effects of clinorotation on the cytosolic calcium concentration of neuroglioma cells. The results have been compared to experiments with identical cells in real microgravity, utilizing parabolic flight missions. Our results show that in case of a cell suspension used in a small florescence clinostat within a tube diameter of 2mm, the effects of clinorotation are comparable to those under real microgravity, both showing a significant increase in intracellular calcium concentration.     

Thermocapillary Flow and Coalescences of Heterogeneous Bubble Size Diameter in a Rotating Cylinder: 3D Study

Two dimensional axisymmetric and three-dimensional VOF simulations of gas/liquid transient flow were performed using a multiphase flow algorithm based on the finite-volume method. The results for motion of a multiple bubbles of a heterogeneous sizes aligned horizontally and perpendicular to a hot surface incorporating thermocapillary forces in a rotating liquid in a zero-gravity environment have been presented for the first time. No bubbles broke in any of the cases observed. The results also show that collision and agglomeration of bubbles of unequal sizes diameter are different from those of similar size diameters presented from earlier research work of Alhendal et al. Acta Astronaut. 117, 484–496 (2015). Different flow patterns such as thermocapillary bubble migration, collision, and stream function were observed and presented for the 2-D and 3-D models.