Update on optimized purification and characterization of natural milk allergens

Highly purified allergens namely cow's milk alpha-lactalbumin (ALA). (Bos d 4), beta-lactoglobulin (BLG) (Bos d 5) and casein (Bos d 8) and goat's milk casein were prepared from the raw milk from a single animal with a known genetic background. Consequently the natural isoforms are limited, constant and characterized. Purification included selective precipitations and chromatographical steps. Characterization of structure and allergenic activity assessment of milk allergens were carried out using physicochemical and immunochemical methods. Taken together data demonstrated the absence of impurities and of contamination by other milk allergens in each preparation. NMR and circular dichroism analyses confirmed the native conformation and proper folding of ALA and BLG and the expected absence of folding of bovine and caprine casein. Enzyme immuno assays confirmed the native conformation of BLG and the purity and immunoreactivity of all the proteins. The allergenic activity, e. g. the IgE binding capacity, of purified proteins was identical as that of those proteins when present in milk. The purified proteins also demonstrated the ability to provoke the degranulation of humanized rat basophilic leukaemia cells. All the data thus confirm the purity, identity, structural conformation and functionality of the prepared milk allergens.     

Improving the transfer of near infrared prediction models by orthogonal methods

Eight calibration transfer methods based on the removal of orthogonal signal were compared for the standardization of whole soybean protein and oil models. Dynamic orthogonal projection (DOP), transfer by orthogonal projection (TOP), error removal by orthogonal subtraction (EROS), orthogonal signal correction (OSC), and orthogonal projections to latent structures (O-PLS) as well as the modification and extension of some of these methods were compared in the transfer of models in intra and inter-brand situations using two Foss Infratecs and two Bruins OmegAnalyzerGs. For each brand, a master was designated and its models transferred onto the second unit of its network and the two units of the second brand. Calibration models were transferable from brand to brand with similar or better precision than when each instrument was calibrated on its own calibration set (for Infratec 1229, the relative predictive determinant (RPD) increased in intra and inter-brand calibration transfer situations from 10.42 to 11.45 and 10.57, with DOP and EROS respectively). Performance of each method was different across parameters, instruments, and validation sets. DOP modifications on the determination of the difference matrix showed promising results while TOP and EROS extensions to include variability specifically present in certain crop years did not bring any beneficial effects.     

Experimental and Molecular Dynamics Simulations of Tribochemical Reactions with ZDDP: Zinc Phosphate–Iron Oxide Reaction

Zinc phosphate glass is considered to be the main constituent of tribofilms generated under boundary lubrication with zinc dialkyldithiophosphate (ZDDP), a well-known antiwear additive. The reaction occurring during friction between zinc phosphate glasses and steel native iron oxide layer is investigated by both an experimental approach and by Molecular Dynamics simulations (MD). The importance of this “tribochemical” reaction in the general ZDDP antiwear process is discussed.     

Performance Analysis and Modeling of Thermally Sprayed Resistive Heaters

Many processes and systems require hot surfaces. These are usually heated using electrical elements located in their vicinity. However, this solution is subject to intrinsic limitations associated with heating element geometry and physical location. Thermally spraying electrical elements directly on surfaces can overcome these limitations by tailoring the geometry of the heating element to the application. Moreover, the element heat transfer is maximized by minimizing the distance between the heater and the surface to be heated. This article is aimed at modeling and characterizing resistive heaters sprayed on metallic substrates. Heaters were fabricated by using a plasma-sprayed alumina dielectric insulator and a wire flame-sprayed iron-based alloy resistive element. Samples were energized and kept at a constant temperature of 425 °C for up to 4 months. SEM cross-sectional observations revealed the formation of cracks at very specific locations in the alumina layer after thermal use. Finite-element modeling shows that these cracks originate from high local thermal stresses and can be predicted according to the considered geometry. The simulation model was refined using experimental parameters obtained by several techniques such as emissivity and time-dependent temperature profile (infra-red camera), resistivity (four-probe technique), thermal diffusivity (laser flash method), and mechanical properties (micro and nanoindentation). The influence of the alumina thickness and the substrate material on crack formation was evaluated.     

Energy efficiency actions related to the rollout of smart meters for small consumers, application to the Austrian system

Smart meters (SM) may provide large benefits to all stakeholders by providing the information required to implement certain sets of demand response actions. Benefits produced by SM related actions depend on the features of these actions, the system and the targeted consumer group.We first lay out an analytical framework to analyze the application of Demand Response (DR) actions. Based on this framework, we describe a way to determine the response of domestic load in a system to the implementation of DR actions. We propose determining the overall change in the consumption behavior of domestic load based on previously obtained estimates of the peak load and overall consumption reduction for different types of consumers in different types of systems resulting from the application of each set of actions. We have carried out a comprehensive literature review to provide here such estimates.We apply the analytical framework and methodology developed to characterize the reaction of consumers in the Austrian system to different SM related actions. Finally, we provide guidelines on which DR actions to implement in this system and how to implement them. The use of advanced indirect feedback on consumption behavior, critical peak prices and simple time-of-use tariffs is advocated.     

Back-end soft and hard defect monitoring using a single test chip

The objective of this paper is to present a mixed test structure designed to characterize yield losses due to hard defect and back-end process variation (PV) at die and wafer level. A brief overview of the structure, designed using a ST-Microelectronics’ 130 nm technology, is given. This structure is based on a SRAM memory array for detecting hard defects. Moreover each memory cell can be configured in the Ring Oscillator (RO) mode for back-end PV characterization. The structure is tested in both modes (SRAM, RO) using a single test flow. The test data analysis method is presented and applied to experimental results to confirm the ability of the structure to monitor PV and defect density.     

Compaction index of cement paste of normal consistency

Knowing the virtual packing densities of all the components in a mixture is necessary to calculate its granular packing density with the compressible packing model. The calculation of these virtual packing densities is based on real packing density measurements carried out according to specific operating modes, each one with a different compaction index K. For powders, the current method consists in adding water to powder in a mixer until obtaining a smooth paste (K = 6.7). But this method remains subjective since the degree of smoothness achieved is estimated by the operator. The objective of this work is to put forward a more rational alternative method based on tests of normal consistency used in cement plants. This paper presents experiments on binary mixtures (cement–mineral admixtures), with or without superplasticizer, which have resulted in a compaction index K = 4.8. Using these results, the amount of water (given in the technical data sheet) needed to obtain a normal consistency allows the calculation of virtual packing densities of standardized cements. However, if a superplasticizer is used it is necessary to carry out this test. Its saturation proportion can also be estimated with the test of normal consistency.     

Zinc Dialkyl Phosphate (<Emphasis Type="Bold">ZP</Emphasis>) as an Anti-Wear Additive: Comparison with <Emphasis Type="Bold">ZDDP</Emphasis>

In this study, we are interested in the anti-wear properties of zinc dialkyl phosphate additive (ZP) in comparison with ‘classical’ zinc dialkyldithiophosphate (ZDDP). Friction tests were performed on a reciprocating tribometer using both ball-on-flat and cylinder-on-flat configurations under a Hertzian contact pressure of 0.9 GPa. Experiments were carried out as a function of temperature (25 and 100 °C), sliding speed (25, 50 and 100 mm/s) and additives concentrations. Ball wear scar diameters as well as friction coefficient were measured. In order to better understand the anti-wear mechanisms of these additives, friction tests were followed by surface analyses such as AES (Auger Electron Spectroscopy) and XPS (X-Ray Photoelectron Spectroscopy). Transmission Electron Microscopy (TEM) observations of the ZDDP and ZP tribofilms were also carried out to visualise the generated layers. The anti-wear capability of ZP molecule is discussed.     

Effects of club size in the provision of public goods. Network and congestion effects in the case of the French municipalities

The article formalizes and measures the impact of club size on the quality of the public good provided to its members. Under a general framework we describe various functional forms that allow either network or crowding effects. Mechanisms of provision are that of a political process in which both the demand and the supply sides are considered. Estimations use the whole set of French municipalities. The supply model performs better than the demand model in the case of small municipalities, while for large cities the demand model has higher explanatory power. In so far as impact of city size on the quality of club goods is concerned, crowding does appear, but it does so in different patterns. For small towns marginal congestion first decreases then increases with population. Marginal congestion is decreasing for cities of intermediate size. For larger cities no significant effects are observed. Received: 27 June 2000 / Accepted: 20 August 2001 RID="*" ID="*" We have received particularly helpful comments from the editor-in-chief and two anonymous referees. We also thank Danièle Moret-Bailly for her friendly computational assistance.     

Certain effects of melt-shearing and cooling on the stress-strain behavior of thermoplastic elastomers

The peculiar behavior of thermoplastic elastomers in molding suggested that the processing steps (mainly shearing) to which the material had been submitted had a great influence on the morphology. Experiments were carried out on two polysstyrene-polybutadiene-polystyrene elastomers. The effects of melt-shearing and cooling were examined both by mechanical testing and low angle X-ray scattering. Melt-shearing creates a marked morphological anisotropy but a form of annealing can occur at sufficiently high temperatures.