Thermodynamic analysis and parametric study of an intercooled–reheat closed-cycle gas turbine on the basis of a new isentropic exponent

The thermodynamic analysis and parametric study of an intercooled–reheat closed-cycle gas turbine is presented in this paper, on the basis of a new (harmonic mean) isentropic exponent. An analytical expression is derived for the optimum pressure ratio and maximum non-dimensional net work output. It is found that the optimum pressure ratio and the maximum non-dimensional net work are high when the ratio of extreme temperatures of cycle (i.e. T _max and T _min) and isentropic efficiencies of compressor and turbine (i.e. η_c and η_t) are high. The theoretical results are also compared with the practical conditions of power plant.     

Passive solar heating of a non-airconditioned building with movable insulation over the roof pond

This paper presents a simple mathematical model for solar space heating in a non-airconditioned building with movable insulation over the roof pond. The building room considered is of rectangular shape (6 m × 5 m × 4 m) based on the ground. The effects of heat conduction to the ground, heat transfers to furnishings and heat losses due to air ventilation/infiltration have been taken into account in the general heat transfer analysis. The day-to-night change of insulation over the roof pond has been represented by a rectangular step function variation of the heat transfer coefficient at the pond's surface. An increase of 3 to 4°C in the room air temperature is achieved by means of movable insulation over the roof pond on a mild winter's day (17th February, 1982) in New Delhi.     

Geometric optimization of trapezoidal thermoelectric heat pump considering contact resistances through genetic algorithm

An alternate option for improving the performance of the thermoelectric heat pump (TEHP) is the variation in thermoelectric leg configuration. In this paper, the thermodynamic model based on first and second law of thermodynamics for an exoreversible TEHP including influence of Thomson effect as well as leg geometry on the coefficient of performance and heating load of the device has been developed and optimized. Modified expressions have been derived analytically for dimensionless heating load, irreversibilities, figure of merit, energy, and exergy efficiency. The effects of operating and geometry parameters such as shape parameter (A_c/A_h), temperature ratio (T_c/T_h), Thomson effect, thermal and electrical contact resistances on the coefficient of performance, and heating load of the TEHP have been analysed. The results indicate that the Thomson effect has adverse effect on heating load of the system. The optimal parameters obtained through GA optimization process have been compared with the optimal parameters obtained through analytical method which proved the validity of GA optimization method for optimization of TEHP. After the testing, the GA optimization has been performed to determine the optimum parameters corresponding to maximum energy efficiency and maximum heating load. It was found that the GA population converges quickly after 20 runs only which proved the GA as time and cost‐effective optimization tool. This study will be useful for designing of practical TEHP systems of different leg geometries.     

Feature Selection for Recognition of Online Handwritten Bangla Characters

Feature selection through optimization techniques provides an interesting approach to minimize computational time with enhanced prediction capability, and     

Optimizing microstructure for toughness: the model problem of peeling

We consider the problem of peeling an adhesive thin film from a substrate that has a non-uniform distribution of adhesive. When the length scale of the non-uniformity is small compared to the overall dimensions of the film being peeled, it is possible to describe the overall peeling behavior with an effective adhesive strength. In this paper, we seek to find the distributions of adhesive strength at the microscale that optimize various aspects of the effective adhesive strength at the macroscale. We do so using both analytic bounds and topology optimization. We formulate the problem of peeling as a free boundary problem, and the effective strength as a maximum principle over the trajectory. For topology optimization, we replace the maximum with an integral norm, and use an adjoint method for the sensitivity. The problem of peeling may be viewed as a model problem in fracture mechanics where the crack (peel) front is confined to a plane, and thus our analysis as a first step toward studying the more general problem of optimizing microstructure for toughness.     

Creep studies on U–7%Zr,U–7%Nb and U rich U–Nb–Zr alloys

Creep behavior of U–7%Zr, U–5%Zr–2%Nb, U–3.5%Zr–3.5%Nb, U–2%Zr–5%Nb, U–7%Nb alloys (composition in wt.%) was investigated by the impression creep technique at 630 and 700 °C at a stress of 22.2 MPa. Creep rate was found to be two orders lower in the binary U–7%Nb than the U–7%Zr alloy. In ternary U–Nb–Zr alloys, the creep rate was found decreasing drastically with the increase in Nb content.     

Heat transfer analysis of receiver for large aperture parabolic trough solar collector

Parabolic trough solar collector (PTSC) is one of the most proven technologies for large‐scale solar thermal power generation. Currently, the cost of power generation from PTSC is expensive as compared with conventional power generation. The capital/power generation cost can be reduced by increasing aperture sizes of the collector. However, increase in aperture of the collector leads to higher heat flux on the absorber surface and results in higher thermal gradient. Hence, the analysis of heat distribution from the absorber to heat transfer fluid (HTF) and within the absorber is essential to identify the possibilities of failure of the receiver. In this article, extensive heat transfer analysis (HTA) of the receiver is performed for various aperture diameter of a PTSC using commercially available computational fluid dynamics (CFD) software ANSYS Fluent 19.0. The numerical simulations of the receiver are performed to analyze the temperature distribution around the circumference of the absorber tube as well as along the length of tube, the rate of heat transfer from the absorber tube to the HTF, and heat losses from the receiver for various geometric and operating conditions such as collector aperture diameter, mass flow rate, heat loss coefficient (HLC), HTF, and its inlet temperature. It is observed that temperature gradient around the circumference of the absorber and heat losses from the receiver increases with collector aperture. The temperature gradient around the circumference of the absorber tube wall at 2 m length from the inlet are observed as 11, 37, 48, 74, and 129 K, respectively, for 2.5‐, 5‐, 5.77‐, 7.5‐, and 10‐m aperture diameter of PTSC at mass flow rate of 1.25 kg/s and inlet temperature of 300 K for therminol oil as HTF. To minimize the thermal gradient around the absorber circumference, HTFs with better heat transfer characteristics are explored such as molten salt, liquid sodium, and NaK78. Liquid sodium offers a significant reduction in temperature gradient as compared of other HTFs for all the aperture sizes of the collector. It is found that the temperature gradient around the circumference of the absorber tube wall at a length of 2 m is reduced to 4, 8, 10, 13, and 18 K, respectively, for the above‐mentioned mass flow rate with liquid sodium as HTF. The analyses are also performed for different HTF inlet temperature in order to study the behavior of the receiver. Based on the HTA, it is desired to have larger aperture parabolic trough collector to generate higher temperature from the solar field and reduce the capital cost. To achieve higher temperature and better performance of the receiver, HTF with good thermophysical properties may be preferable to minimize the heat losses and thermal gradient around the circumference of the absorber tube.     

Application of High Hydrostatic Pressure as a Pretreatment for Osmotic Dehydration of Banana Slices (Musa cavendishii) Finish-Dried by Dehumidified Air Drying

The process variables high hydrostatic pressure (HHP; 100–500 MPa), sucrose concentration (30–70 °Brix), immersion time (5–9 h) and immersion temperature (30–70 °C) were optimised to yield maximum water loss (WL), minimum solid gain (SG), minimum water activity (a _w) and minimum browning index (BI) during osmotic dehydration (OD) of banana slices (Musa cavendishii) pretreated by HHP using response surface methodology. The pressure-treated samples showed significantly higher WL and SG during OD (p?<?0.05), which was attributed to the rupture of cell wall with applied pressure, making the cells more permeable, also evident from the scanning electron micrographs of the banana tissue. The optimised operating conditions were: HHP of 200 MPa for a dwell time of 5 min at room temperature (26 °C), sucrose concentration of 60 °Brix, immersion time of 5 h and immersion temperature of 40 °C. A study of the concentration profiles during OD revealed no appreciable increase in SG and WL after 4 h; hence, immersion time was reduced to 4 h. The optimised product developed was dried to a moisture content of 15 % (wet basis) in a dehumidified air dryer at an air temperature of 40, 55 and 70 °C with a fixed air velocity of 3.8 m/s and relative humidity maintained at 20 %. The final dried product was analyzed for total soluble solids content, BI and a _w. A drying temperature of 55 °C was found to give superior quality OD banana slices in terms of reduced bulk, improved flavour, decreased a _w (<0.60), and reduced dehydration time and energy using HHP as a pretreatment.     

Biosorption of Cr(VI) by immobilized biomass of two indigenous strains of cyanobacteria isolated from metal contaminated soil

Biosorption of Cr(VI) using native strains of cyanobacteria from metal contaminated soil in the premises of textile mill has been reported in this paper. Biosorption was studied as a function of pH (1-5), contact time (5-180 min) and initial chromium ion concentration (5-20mg/l) to find out the maximum biosorption capacity of alginate immobilized Nostoc calcicola HH-12 and Chroococcus sp. HH-11. The optimum conditions for Cr(VI) biosorption are almost same for the two strains (pH 3-4, contact time 30 min and initial chromium concentration of 20mg/l) however, the biomass of Chroococcus sp. HH-11 was found to be more suitable for the development of an efficient biosorbent for the removal of Cr(VI) from wastewater, as it showed higher values of q(m) and K(f), the Langmuir and Freundlich isotherm parameters. Both the isotherm models were suitable for describing the biosorption of Cr(VI) by the cyanobacterial biosorbents.     

A molecular model for solid-state polymerization of nylon 6

Transport properties of antioxidants in polymers have a very important role in their effectiveness. Lifetime of a product is strongly influenced by the physical loss of the stabilizer. The diffusion coefficient (D) and solubility (S) of Irganox 1010 in low-density polyethylene (LDPE) were studied at 45 and 80°C, changing the physical state of the antioxidant in the additive source. Irganox 1010 is a polymorphous material; its actual morphology depends on the thermal history. It was proved that the morphology of the additive has a determining effect on the measured D and S values. Contradictions in the literature data can be explained by the differences in the experimental conditions, i.e., in the physical state of the penetrant in the additive source and the crystallinity and orientation of the polymer.