An analytical approach to dynamic crosstalk in coupled interconnects

This paper deals with waveform analysis, crosstalk peak and delay estimation of CMOS gate driven capacitively and inductively coupled interconnects. Simultaneously switching inputs for the coupled interconnects are considered. A transmission line-based coupled model of interconnect is used for analysis. Alpha-power Law model of MOS transistor is used to represent the transistors in CMOS driver. Peaks and delays at far-end of victim line are estimated for conditions when the inputs to the two coupled interconnects are switching in-phase and out-of-phase. The comparison of analytically obtained results with SPICE simulations show that the proposed model captures noise peak and their timing; 90% propagation delay; transition time delay and waveform shape with good accuracy, such as not more than 5% error in crosstalk peak estimation.     

Equations for nucleation of hydrogen gas pores during solidification of aluminium seven weight percent silicon alloy

A statistical prediction model has been applied to the nucleation rate as a function of temperature for an Al7Si alloy based upon observations of pore formation during solidification in an XTGS. A normalised Gaussian function was developed ((1), (2), (3) and (4)) which may be used to describe pore nucleation in mathematical simulations of porosity formation during solidification.     

Evaluation of the methods for calculating the concentration-dependent diffusivity in binary systems

Boltzmann and Matano developed a procedure for the solution to Fick’s second law when the diffusivity is a function of concentration. The procedure requires the determination of the so-called Matano interface. The accuracy of the resulting solution depends heavily on the precise location of the Matano interface, the determination of which is laborious and often inaccurate. Three alternative procedures by Sauer and Freise, Wagner, and den Broeder, modifications to the original Boltzmann-Matano (B-M) method, were developed such that the diffusivity can be calculated without having to determine the location of the Matano interface. However, none of these derivations quantifies the extent to which the modified methods arrive at the same result as that obtained from the standard B-M analysis. This article serves to apply the B-M method, and the modification suggested by den Broeder, to various analytical concentration profiles containing different degrees of noise and to compare the results quantitatively. In addition to these analytical functions, concentration profiles obtained from interdiffusion experiments were studied. The two methods are shown to be equivalent in terms of the accuracy of the result. The advantages or disadvantages of one method over the other are illustrated with examples.     

Minimization of organic chemical load in direct dyes effluent using low cost adsorbents

The work is carried out to minimize the organic chemical load (unexhausted dye contents) in direct dyes effluent using low cost adsorbents. The studies are made with different direct dyes, i.e. Direct Red 28, Direct Yellow 12, Direct Orange 26 and Direct Blue 1 with various adsorbents. Three different bio/natural materials have been selected as adsorbents. These includes, Sugarcane bagasse pith (SB), Saw dust (SD)—the plant origin products, and Brick powder (BP)—a silica based material obtained from earth's crust on thermal heating. These substances are almost discarded waste products with the possibility of use as adsorbents. Experimental work for the dye removal from the effluent by activated charcoal (AC) has also been carried out and the results are compared with other adsorbents. The amount of unexhausted organic dye present in the effluent is measured as chemical oxygen demand (COD) before and after the treatment. Adsorbent Sugarcane bagasse pith shows good performance as compared to Saw dust and Brick powder. For understanding the behaviour of adsorbents Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM) has also been carried out.     

Effect of ionizing radiation on antinutritional features of velvet bean seeds (Mucuna pruriens)

Impact of gamma irradiation on the antinutritional constituents of seeds of Mucuna pruriens was assessed on exposing to doses of 2.5, 5.0, 7.5, 10, 15 and 30 kGy. Except for 2.5 kGy, the rest showed significant dose-dependent increase in phenolics. Tannin concentration did not differ significantly up to 7.5 kGy, while it significantly increased at higher doses. Excluding 2.5 kGy, the rest of the treatments showed significant decreases in the phytic acid and complete degradation was attained at 15 and 30 kGy. The l-DOPA concentration showed a dose-dependent decline. A trace amount of hemagglutination activity was seen on human erythrocytes in raw seeds, which was completely absent on irradiation (>5 kGy). Concentration of Polonium-210, a natural radionuclide falls within the admissible limits for consumption. As Mucuna seeds serve as food, feed or as pharmaceuticals, it may be necessary to set the ionizing radiation to a specific dose to retain optimum levels or to eliminate phenolics, tannins, phytic acid and L-DOPA. As irradiation is a physical and cold process, it may be ideal and emerge as an important technique to improve the nutritional or pharmaceutical quality of Mucuna seeds and its products.     

Development of male contraceptive vaccine--a perspective

Anti-disialoganglioside (GD2) monoclonal antibodies (MAbs) have been used in vivo for immunolocalization and in phase I and II trials to target disseminated neuroblastoma, the most common extracranial solid tumor in children. However, the efficacy of these first-generation MAbs is likely to be improved by using engineered anti-GD2 antibodies. The generation of single-chain antibody fragments (scFv) could be very helpful as these molecules can be further modified to produce recombinant molecules with pre-defined properties such as immunotoxins, chimeric, or bispecific antibodies. Thus, a scFv directed against GD2 (scFv 7A4) was cloned, sequenced, and expressed. Its binding properties were characterized and compared to that of the parental MAb 7A4. Nucleotide sequence analysis of the scFv 7A4 indicated that its VH region belongs to the V region IIID subgroup and the V kappa to the V region II subgroup. The scFv 7A4 bound to GD2+ neuroblastoma cell lines but not to GD2- cell lines or to GD2- cells isolated from peripheral blood. ELISA and thin-layer chromatography (TLC) indicated that it retained the anti-GD2 specificity, and exhibited a slight cross-reaction with GD3 as the parental MAb. This scFv makes it possible to develop new useful reagents through genetic engineering for adjuvant tumor therapy.     

Delamination dynamics in through-thickness reinforced laminates with application to DCB specimen

Bridged crack models using beam theory formulations have proved to be effective in modeling quasi-static delamination crack growth under large scale bridging conditions in through-thickness reinforced structures. In this paper, beam theory is used to study dynamic mode I crack propagation in through-thickness reinforced laminar structures. In particular, steady state dynamic crack growth for a Double Cantilever Beam (DCB) loaded with a flying wedge is examined. The steady state crack propagation characteristics are mapped out in terms of controllable loading and material parameters including the crack velocity and the properties of the through-thickness reinforcement. For small crack velocities, the through-thickness reinforcement considerably enhances the delamination resistance of the structure. At higher velocities, the kinetic energy term dominates the overall energetics and the relative effect of the reinforcement on the delamination resistance is insignificant. The model suggests a simple fracture test for estimating the properties of the through-thickness reinforcement under dynamic loading conditions.