Water sorption of poly(vinyl alcohol)/ poly(diallyldimethylammonium chloride) interpenetrating polymer network hydrogels

Temperature‐responsive interpenetrating polymer network (IPN) hydrogels constructed with poly(vinyl alcohol) and poly(diallyldimethylammonium chloride) using the sequential IPN method were studied. The characteristics of IPN hydrogels were investigated using the dynamic vapor sorption system. IPN hydrogels exhibited a relatively high sorption ratio, 180–360% at room temperature. The sorption ratio of hydrogels depended on temperature. Diffusion coefficients were calculated according to the Fickian Law at several temperatures. The apparent activation energy was 5.43 kJ mol^?1, which corresponds to typical diffusion processes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1389–1392, 2003     

Adsorption of aroma chemicals on cotton fabric from aqueous systems

The adsorption of aroma chemicals on cotton fabric was studied relative to the surfactant concentration, surfactant type, water solubility, and fiber morphology. The adsorption increased with increasing surfactant concentration to a maximum near the critical micelle concentration, then decreased with further increases in surfactant concentration. The adsorption also was found to be highly dependent on the fiber surface area and pore structure; dramatic differences were observed between untreated and mercerized cotton fabric and are believed to be due to morphological differences. Cationic and anionic surfactants increased the aroma chemical adsorption, which varied with surfactant type, with cetyltrimethylammonium chloride (CTAC)>sodium dodecyl sulfate (SDS)>H₂O. Water solubility also influenced adsorption; in most cases, adsorption increased with water solubility. In addition, adsorption was also influenced by chemical structure and hydrophobic interactions. The adsorption of aroma chemicals on cotton fabric can be attributed to the aqueous solution being physically held in capillaries and pore structures within the fibular structure of cotton fiber and also to molecular interactions among the aroma chemical molecules, surfactants, and cotton substrate.     

The characteristics of carbon nanotube‐reinforced poly(phenylene sulfide) nanocomposites

Multiwall carbon nanotube reinforced poly (phenylene sulfide) (PPS) nanocomposites were successfully fabricated through melt compounding. Structural, electrical, thermal, rheological, and mechanical properties of the nanocomposites were systematically studied as a function of carbon nanotube (CNT) fraction. Electrical conductivity of the polymer was dramatically enhanced at low loading level of the nanotubes; the electrical percolation threshold lay between 1 and 2 wt % of the CNTs. Rheological properties of the PPS nanocomposites also showed a sudden change with the CNT fraction; the percolation threshold was in the range of 0–0.5 wt % of CNTs. The difference in electrical and rheological percolation threshold was mainly due to the different requirements needed in the carbon nanotube network in different stages. The crystallization and melting behavior of CNT‐filled PPS nanocomposites were studied with differential scanning calorimetry; no new crystalline form of PPS was observed in the nanocomposites, but the crystallization rate was reduced. The thermal and mechanical properties of the nanocomposites were also investigated, and both of them showed significant increase with CNT fraction. For 5 wt % of CNT‐filled PPS composite, the onset of degradation temperature increased by about 13.5°C, the modulus increased by about 33%, and tensile strength increased by about 172%. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Structural Basis for The Recognition of Deaminated Nucleobases by An Archaeal DNA Polymerase

With increasing temperature, nucleobases in DNA become increasingly damaged by hydrolysis of exocyclic amines. The most prominent damage includes the conversion of cytosine to uracil and adenine to hypoxanthine. These damages are mutagenic and put the integrity of the genome at risk if not repaired appropriately. Several archaea live at elevated temperatures and thus, are exposed to a higher risk of deamination. Earlier studies have shown that DNA polymerases of archaea have the property of sensing deaminated nucleobases in the DNA template and thereby stalling the DNA synthesis during DNA replication providing another layer of DNA damage recognition and repair. However, the structural basis of uracil and hypoxanthine sensing by archaeal B-family DNA polymerases is sparse. Here we report on three new crystal structures of the archaeal B-family DNA polymerase from Thermococcus kodakarensis (KOD) DNA polymerase in complex with primer and template strands that have extended single stranded DNA template 5’-overhangs. These overhangs contain either the canonical nucleobases as well as uracil or hypoxanthine, respectively, and provide unprecedented structural insights into their recognition by archaeal B-family DNA polymerases.     

Effects of Adenine Methylation on the Structure and Thermodynamic Stability of a DNA Minidumbbell

DNA methylation is a prevalent regulatory modification in prokaryotes and eukaryotes. N¹-methyladenine (m¹A) and N⁶-methyladenine (m⁶A) have been found to be capable of altering DNA structures via disturbing Watson–Crick base pairing. However, little has been known about their influences on non-B DNA structures, which are associated with genetic instabilities. In this work, we investigated the effects of m¹A and m⁶A on both the structure and thermodynamic stability of a newly reported DNA minidumbbell formed by two TTTA tetranucleotide repeats. As revealed by the results of nuclear magnetic resonance spectroscopic studies, both m¹A and m⁶A favored the formation of a T·m¹A and T·m⁶A Hoogsteen base pair, respectively. More intriguingly, the m¹A and m⁶A modifications brought about stabilization and destabilization effects on the DNA minidumbbell, respectively. This work provides new biophysical insights into the effects of adenine methylation on the structure and thermodynamic stability of DNA.     

DEHYDRATION BY DESORPTION AND BY SPRAY DRYING OF DAIRY PROTEINS: INFLUENCE OF THE MINERAL ENVIRONMENT

A drying method by desorption in a water activity meter was used to simulate the conditions of spray drying and to determine the water transfer inside dairy concentrates towards the surface and from the surface to the drying air. The concentrates were also spray dried and solubility index of powders were determined during reconstitution. Whey protein concentrates (WPC) and native phosphocaseinate suspensions (NPCS) were used to study the effect of NaCl (420 mM), CaCl₂ (222 raM), sodium phosphate (173 mM) and sodium citrate (238 mM) on the water transfers. The decrease in water transfer during drying was explained by the high hygroscopicity of added mineral salts to WPC. NaCl addition to NPCS decreased the water transfer during drying, but increased the solubility index. Citrate and phosphate addition to NPCS increased the water transfer during drying and reconstitution. CaCl₂ increased the water transfer during drying but the solubility index was always low. Results are discussed as a function of the aqueous environment, of the nature of mineral salts, of the structure of dairy proteins and of protein solvation.     

Detergency of used motor oil from cotton and polyester fabrics

A study was conducted to identity factors contributing to the difficult removal of used motor oil from textile materials by detergency. Infrared spectroscopy and gel permeation chromatography of used motor oil showed that the oil was a saturated aliphatic hydrocarbon with molecular weight around 950. X-ray analysis revealed that particulates present in the used motor oil contained S, Mg, Al, Si, K, Ca, Fe, Ni, Cu, and Zn. Used motor oil was distributed throughout the cotton fibers with similar concentration of oil in the lumen, secondary wall, and surface crenulation. Higher relative concentrations of used motor oil were observed in the secondary wall of the fiber than has been reported for human sebum. No oil was found in the interior of polyester fibers although high concentrations of oil were detected in the interfiber spaces and on the fiber surfaces of polyester fibers. Dispersant additives of motor oil are though to enhance penetration into the cotton structure and wicking over the polyester fibers, making the nonpolar used motor oil very difficult to remove by detergency.     

Local-scale analysis of carbon mitigation strategies: Tompkins County,New York,USA

The costs and potential for several carbon mitigation options were analyzed for Tompkins County, NY, within several categories: terrestrial carbon sequestration, local power generation, transportation, and energy end-use efficiency. The total county emissions are about 340 Gg C/year, with current biomass sequestration rates of about 121 Gg C/year. The potential for mitigation with the options examined, assuming full market penetration, amounts to at least 234 Gg C/year (69%), with 100 Gg C/year (29%) at no net cost to the consumer. Effective carbon mitigation strategies for this county based on costs per mg carbon and maximum potential include reforestation of abandoned agricultural lands for terrestrial carbon sequestration, biomass production for residential heating and co-firing in coal power plants, changes in personal behavior related to transportation (e.g., carpooling or using public transportation), installation of numerous residential energy-efficient products and development of local wind power. The principal barriers to the implementation of these approaches are discussed and policies for overcoming these barriers are analyzed.