Project affinity: the role of emotional attachment in construction projects

Although a wide range of human and organizational factors have been found to be important in the operation of projects, those determined by cultural variables are less well defined. One such influence concerns the notion of ‘project affinity’, the commitment and attachment by stakeholders and participants to projects and their outcomes. The temporal nature and transient involvement context provided by construction projects arguably presents a climate in which many participants are less likely to display commitment to its goals. This note is concerned with the issue of whether an attachment to a project's goals or to the completed product can lead to improved commitment among those involved. The concept of project affinity was developed in the course of a case study investigation in which operatives' attitudes towards the construction of a cancer research facility were explored. Because of the contribution of the facility to the future care of cancer sufferers, the concept of project affinity proved helpful in understanding a factor that appeared to be influencing the commitment of those involved. The results suggest a complementary concept to that of ‘project chemistry’ (c.f. Nicolini, 2002 Nicolini, D. 2002. In search of ‘project chemistry’.. Construction Management and Economics, 20: 167–77.  ).     

Photo-vulcanization using thiol-ene chemistry: Film formation,morphology and network characteristics of UV crosslinked rubber latices

The photo-vulcanization with versatile thiol-ene chemistry represents an innovative approach to crosslink diene-rubber materials both in latex and in solid film state. In this work, the structure of elastomer-based thiol-ene networks and the morphology after film formation are studied in detail using electron microscopic techniques, atomic force microscopy and multiple-quantum solid-state NMR spectroscopy. Additionally, film formation properties and corresponding macroscopic properties of photo-vulcanized natural rubber (NR) latex and its synthetic counterpart, isoprene rubber (IR) latex, are determined in dependence on the curing procedure (pre- and post-vulcanization). The results reveal that thiol-ene cured elastomers comprise homogenously distributed crosslinks with a low amount of short chain defects. Whilst photochemically pre-cured NR latex particles provide coherent films, the film formation and mechanical properties of IR are strongly governed by the crosslink density of the latex particles. In film state, photo-vulcanization promotes narrow crosslink distributions and excellent tensile properties of both NR and IR.     

Fluidization of spherical versus elongated particles: Experimental investigation using magnetic particle tracking

In biomass processing fluidized beds are used to process granular materials where particles typically possess elongated shapes. However, for simplicity, in computer simulations particles are often considered spherical, even though elongated particles experience more complex particle– particle interactions as well as different hydrodynamic forces. The exact effect of these more complex interactions in dense fluidized suspensions is still not well understood. In this study we use the magnetic particle tracking technique to compare the fluidization behavior of spherical particles to that of elongated particles. We found a considerable difference between fluidization behavior of spherical versus elongated particles in the time-averaged particle velocity field as well as in the time-averaged particle rotational velocity profile. Moreover, we studied the effect of fluid velocity and the particle's aspect ratio on the particle's preferred orientation in different parts of the bed, which provides new insight in the fluidization behavior of elongated particles.     

Anthocyanins remain stable during commercial blackcurrant juice processing

Abstract: It remains important to establish the stability of anthocyanins throughout commercial processing in order to maintain the bioactivity of the processed food/s. The present study aimed to assess the recovery and formation of anthocyanins and their free phenolic acid degradation products during the commercial processing of blackcurrant juice concentrate. A bench‐scale processing model was also established to allow for alteration of predefined parameters to identify where commercial processes could be modified to influence anthocyanin yield. No significant loss in anthocyanins was observed throughout the commercial processing of blackcurrants, from whole berry through milling, to pectin hydrolysis and sodium bisulphite addition (P ≥ 0.7). No significant loss in anthocyanins was observed following the subsequent processing of pressed juice, through pasteurization, decantation, filtration, and concentration (P ≥ 0.9). Similarly, the bench‐scale model showed no significant losses in anthocyanin content except during pasteurization (22%± 0.7%, P < 0.001). In the full‐factorial Design of Experiment model analysis, only sodium bisulphite concentration had an impact on anthocyanin recovery, which resulted in an increase (23% to 27%; P < 0.001) in final anthocyanin concentration. No phenolic degradation products (free protocatechuic acid or gallic acid derived from cyanidin and delphinin species, respectively) were identified in any processed sample when compared to authentic analytical standards, analyzed by ultra‐performance liquid chromatography DAD. Practical Application: This article provides crucial data directly applicable to commercial juice processing, such as improving anthocyanin yield and practical considerations for anthocyanin stability and degradation. This aspect is particularly pertinent considering the current commercial interest in anthocyanin‐derived phenolic acids and their health‐related benefits. Further research and development targets in the area of commercial juice product development are identified.     

Far-off and close-up dry matter intake modulate indicators of immunometabolic adaptations to lactation in subcutaneous adipose tissue of pasture-based transition dairy cows

The common practice of increasing dietary energy density during the close-up dry period (last ～3 wk prepartum) has been recently associated with a higher incidence of metabolic disorders after calving. Despite these reports, over-feeding of metabolizable energy (ME) during the far-off, nonlactating period is a common management policy aimed at achieving optimum calving body condition score (BCS) in pasture-based systems, as cows are generally thinner than total mixed ration cows at the end of lactation. Our hypothesis was that both far-off and close-up overfeeding influence the peripartum adipose tissue changes associated with energy balance and inflammatory state. Sixty mid-lactation, grazing dairy cows of mixed age and breed were randomly allocated to 1 of 2 groups that were managed through late lactation to achieve a low and high BCS (approximately 4.25 and 5.0 on a 10-point scale) at dry-off. The low BCS cows were then overfed ME to ensure that they achieved the same BCS as the higher BCS group by calving. Within each rate of BCS gain treatment, cows were offered 65, 90, or 120% of their pre-calving ME requirements for 3 wk pre-calving in a 2 × 3 factorial arrangement of treatments (i.e., 10 cows/treatment). Subcutaneous adipose tissue was collected via biopsy at ?1, 1, and 4 wk relative to parturition. Quantitative PCR was used to measure mRNA and microRNA expression of targets related to adipogenesis and inflammation. Cows overfed in the far-off period had increased expression of miR-143 and miR-378 prepartum (?1 wk) indicating greater adipogenesis, consistent with their rapid gain in BCS following dry-off. Furthermore, the lower postpartum expression of IL6, TNF, TLR4, TLR9, and miR-145, and a higher abundance of miR-99a indicated lower body fat mobilization in early lactation in the same group. In the close-up period, feeding either 65 or 120% of ME requirements caused changes in FASN, IL1B, IL6R, TLR9, and the microRNA miR-143, miR-155, and miR-378. Their respective expression patterns indicate a tentative negative-feedback mechanism in metabolically compromised, feed-restricted cows, and a possible immune-related stimulation of lipolysis in apparently static adipocytes in overfed cows. Data from cows fed 90% of ME requirements indicate the existence of a balance between lipolytic (inflammatory-related) and anti-lipolytic signals, to prime the mobilization machinery in light of imminent lactation. Overall, results indicate that far-off dry cow nutrition influences peripartum adipose tissue metabolism, with neither strategy negatively affecting the physiological adaptation to lactation. Furthermore, to ensure a favorable transition, cows should be subjected to a small feed restriction in the close-up period, irrespective of far-off nutritional management.     

Germin-like protein Cit s 1 and profilin Cit s 2 are major allergens in orange (Citrus sinensis) fruits

Oranges are clinically relevant allergenic foods. To date, orange allergens have not been characterized in detail. The study is aimed at analyzing the sensitization profile in orange-sensitized subjects with and without clinical allergy, and to identify orange allergens. Fifty-six sensitized subjects with self-reported reactions to orange were grouped into reactors (anaphylaxis or multiple episodes of immediate reactions and/or positive challenge tests) and non-reactors (negative open food challenge tests). Allergens were characterized by IgE immunoblotting, N-terminal sequencing, IgE-inhibition assays, and mediator release assays were performed to determine the allergenic potency of orange profilin. Of 56 subjects, 23 were classified as orange allergic showing mainly an oral allergy syndrome. Of 23 subjects classified as orange allergic, 22 were sensitized to profilin, Cit s 2. In patients with mono-sensitization to profilin in vitro histamine releases up to 75% from basophils were induced using orange extract and purified plant profilins. Of the allergic patients 78% were sensitized to germin-like protein, Cit s 1. Both allergens showed retained IgE reactivity in heat-processed orange juice. Interestingly, subjects with and without clinical allergy showed a comparable sensitization profile. Profilin and germin-like proteins are major orange allergens. The potential clinical relevance of orange profilin was indicated by its strong capacity to release histamine from basophils. However, a predominant sensitization to both allergens in subjects without symptoms also indicates a high frequency of clinically insignificant sensitization.     

Three‐dimensional modeling of porosity development during the gasification of a char particle

This work is devoted to the three‐dimensional, direct modeling of porosity and specific surface development during the gasification of a char particle. The model was developed for heterogeneous reactions occurring inside a char particle in a kinetically controlled regime. The main goal of this work is to analyze the impact of different pore size distributions on the particle carbon conversion rate. In particular, it is shown that under certain conditions the outer particle surface can influence the specific surface area. In this context the possible adaptation of the parameter ψ from the random pore model (RPM) developed by Bhatia and Perlmutter is explained. The results of simulations are compared against the RPM and discussed. Additionally, based on the results of simulations, the physics behind several input parameters used by the RPM are explored. Finally, the possible fragmentation of a chemically reacting char particle during its gasification in dependence of instantaneous porosity was investigated numerically. It was shown that the earliest fragmentation occurs at a carbon conversion of about 0.5–0.6 due to the disaggregation of the pore walls. The results are discussed and compared implicitly with data published in the literature. © 2016 American Institute of Chemical Engineers AIChE J, 63: 1638–1647, 2017     

Improved magnetic particle tracking technique in dense gas fluidized beds

Noninvasive monitoring of multiphase flow is rapidly gaining increased interest. More specifically noninvasive particle tracking techniques have received a lot of attention in recent years to study dense granular flow. However, these techniques are usually quite expensive and require strict safety measures. An improved magnetic particle tracking (MPT) technique for dense granular flow will be presented in this article. The improvements of the analysis technique for MPT will be demonstrated and rigorously tested with a three‐dimensional system and two‐dimensional sensor system. The strengths and limitations of the MPT technique will also be reported. Finally, the results of the MPT are compared with data obtained from a combined particle image velocimetry and digital image analysis technique. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3133–3142, 2014     

Examining Factors That Influence the Effectiveness of Learning Objects in Mathematics Classrooms

Abstract

Learning objects are interactive online tools that support the acquisition of specific concepts. Limited research has been conducted on factors that affect the use of learning objects in K–12 mathematics classrooms. The current study examines the influence of student characteristics (gender, age, computer comfort level, subject comfort level, and mathematics grade), instructional design (structured vs. open ended), and teaching strategy (teacher led vs. student based) on student attitudes toward the use of learning objects and learning performance. Data in the form of surveys and pre- and posttests were collected from 286 middle and secondary school students. Higher computer and subject area comfort ratings were significantly correlated with more positive student attitudes about learning objects. Older students in higher grades learned more than younger students in lower grades after using learning objects. Learning performance was significantly higher for students who used structured (vs. open-ended) learning objects and participated in teacher-led (vs. student-based) lessons. It is speculated that younger students might need more scaffolding when using mathematics-based learning objects.