Thermo-mechanical vibration analysis of rotating nonlocal nanoplates applying generalized differential quadrature method

In this study, thermal and small-scale effects on the flapwise bending vibrations of a rotating nanoplate, which can be the basis of nano-turbine design, have been analyzed. The nano-turbine is made of an orthotropic nanoplate with a setting angle that is modeled based on the classical plate theory (CPT) with cantilever boundary conditions. The axial forces are also included in the model as the true spatial variation due to the rotation and temperature change. The governing equations and boundary conditions are derived according to Hamilton's principle and the governing equations are solved with the aid of the generalized differential quadrature method. The effects of small-scale parameter, nondimensional angular velocity, temperature change, and setting angles in the first four nondimensional frequencies are discussed. Due to the consideration of the rotating effects, results of this study are applicable in nano-machines, such as nano-motors, nano-rotor, and other rotating nano-structures. Also, by considering the effect of thermal loading on rotation of a nanoplate, the results are useful in the design of nano-turbines.     

Morphology and crystallization behavior of nylon 6‐clay/neat nylon 6 bicomponent nanocomposite fibers

Nylon 6‐clay hybrid/neat nylon 6, sheath/core bicomponent nanocomposite fibers containing 4 wt % of clay in sheath section, were melt spun at different take‐up speeds. Their molecular orientation and crystalline structure were compared to those of neat nylon 6 fibers. Moreover, the morphology of the bicomponent fibers and dispersion of clay within the fibers were analyzed using scanning electron microscopy and transmission electron microscopy (TEM), respectively. Birefringence measurements showed that the orientation development in sheath part was reasonably high while core part showed negligibly low birefringence. Results of differential scanning calorimetry showed that crystallinity of bicomponent fibers was lower than that of neat nylon 6 fibers. The peaks of γ‐crystalline form were observed in the wide‐angle X‐ray diffraction of bicomponent and neat nylon 6 fibers in the whole take‐up speed, while α‐crystalline form started to appear at high speeds in bicomponent fibers. TEM micrographs revealed that the clay platelets were individually and evenly dispersed in the nylon 6 matrix. The neat nylon 6 fibers had a smooth surface while striped pattern was observed on the surface of bicomponent fibers containing clay. This was speculated to be due to thermal shrinkage of the core part after solidification of the sheath part in the spin‐line. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39996.     

Comparison of Canola and Soy Flour with Added Isocyanate as Wood Adhesives

Canola is widely grown in the northern latitudes for its vegetable oil, generating large quantities of residual, low value canola flour used as animal feed. The common wood adhesive poly(diphenylmethylene diisocyanate) (pMDI) should react with the wide variety of functional groups in proteins. Therefore, it would seem that canola flour with added pMDI could be an effective adhesive. Two main questions are addressed in this study: How do the wood adhesive properties of canola flour compare to the better-studied soy flour? How well do proteins, which contain an abundance of functional groups, cure with the very reactive pMDI? These questions were addressed using the small-scale adhesive strength test ASTM D-7998, with various adhesive formulations and bonding conditions for canola flour plus pMDI compared to soy adhesives. The more challenging wet cohesive bond strength was emphasized because the dry strengths were usually very good. Generally, soy adhesives were better than canola ones, as was the polyamidoamine-epichlorohydrin cross-linker compared to pMDI, but these generalizations can be altered by the conditions selected. Three-ply plywood tests supported the small-scale test results.     

Energy efficiency optimization of one-way and two-way DF relaying considering circuit power

In this paper, the energy efficiency (EE) of a decode and forward (DF) relay system is studied, where two sources communicate through a half-duplex relay node in one-way and two-way relaying strategies. Both the circuitry power and the transmission power of all nodes are taken into consideration. In addition, three different coding schemes for two-way DF relaying strategy with two phases and two-way DF relaying with three phases are considered. The aim is to maximize the EE of the system for a constant spectral efficiency (SE). For this purpose, the transmission time and the transmission power of each node are optimized. Simulations are used to compare the EE–SE curve of different DF strategies with one-way and two-way amplify and forward (AF) strategies and direct transmission (DT), to find the best energy efficient strategy in different SE conditions. Analytical and simulation results demonstrate that in low SE conditions, DF relaying strategies are more energy efficient compared to that of AF strategies and DT. However, in high SE conditions, the EE of two-way AF relaying and DT strategy outperform some of the DF relaying strategies. In simulations, the impact of different circuitry power and different channel conditions on the EE–SE curves are also investigated.     

Effect of ionic strength on the reactivity ratios of acrylamide/acrylic acid (sodium acrylate) copolymerization

The ionic strength (IS) of polyelectrolyte solutions plays an important role in influencing reaction kinetics. The largely unstudied effect of IS on monomer reactivity ratios and copolymerization rates of acrylamide (AAm) and acrylic acid (AAc), in the form of sodium acrylate (NaAc), is investigated. Salt addition affects the nature of overall charges of the polyelectrolyte solution and diminishes the electrostatic repulsions between reacting chains. Therefore, changing the IS of the solution by incorporating salts affect not only the point estimates of the monomer reactivity ratios but also the overall behavior of the copolymerization (with a transition to azeotropic behavior). Experimental results on copolymerization rates confirm the observed trends in reactivity ratio behavior. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40949.     

Direct power control of DFIG based on discrete space vector modulation

This paper presents a new direct power control (DPC) strategy for a double fed induction generator (DFIG) based wind energy generation system. Switching vectors for rotor side converter were selected from the optimal switching table using the estimated stator flux position and the errors of the active and reactive power. A few number of voltage vectors may cause undesired power and stator current ripple. In this paper the increased number of voltage vectors with application of the Discrete Space Vector Modulation (DSVM) will be presented. Then a new switching table in supersynchronous and subsynchronous frames will be proposed. Simulation results of a 2 MW DFIG system demonstrate the effectiveness and robustness of the proposed control strategy during variations of active and reactive power, machine parameters, and wind speed.     

Impacts of automatic control systems of loop restoration scheme on the distribution system reliability

Loop restoration scheme (LRS) is a special feeder automation (FA) scheme, which is used by utilities to improve distribution system reliability. The LRS is controlled and managed by its automatic control system (ACS). The impacts on distribution system reliability indices of implementing LRS mainly depend on the type of its ACS. Two common types of ACS of LRS are presented and used in this study. Successful operation of ACS is dependent on the protection and automatic control functions of switching devices of LRS. Different failure modes of these switching devices can therefore affect the procedure of ACS in fault detecting, isolating and service restoration. The impacts of failure of protection and automatic control functions of switching devices and fuse of lateral distributors on reliability indices are illustrated. The worth of implementing LRS and its ACS type is represented by the reduction in expected customer interruption cost. A distribution test system is utilised to examine the impacts of two common types of ACS of LRS on the distribution system reliability. Selecting the type of ACS of LRS by utilities relies on the desired level of load-point and system reliability improvement. This study aims to quantitatively assess the impacts of two common types of ACS of LRS on the distribution system reliability.