Input system for part model in CAD from coloured hand-written illustration with use of ITV

An input system for CAD is developed to construct a part model within a computer from a hand-written sketch. The sketch is drawn based on the technical illustration method. The shape of the input part is constructed by the combination of cuboids and cylinders at present. A coloured illustration is adopted for the ease of the shape recognition and for the input of the technological information.

The illustration is fed into the computer via a black and white ITV. Colours are identified referring to the brightness of the input image. The constitutive bodies, the geometric element with the technological information and the content of the technological information are recognized through image processing such as noise filtering, thinning of the contours, detection of lines and so on. The input system outputs a set of commands to the modelling system. The integrated part model which includes not only the geometrical information but also the technological information of the part is constructed by the connected modelling system CIMS/MODE.

The combination of the input system and the modelling system can support the designer to construct the detailed part model within the computer effectively. It is expected to extend the ability of the input system to identify general hand-written illustrations so that the input method will be more practical and useful.     

Ultrastructural studies in epidermolysis bullosa hereditaria. III. Recessive dystrophic types with dermolytic blistering (Hallopeau-Siemens types and inverse type)

In this paper the authors describe and analyse results that they obtained by infection of the guinea pig organism carried out by subcutaneous or intratracheal application with five mycobacterial strains, namely Myco bovis BCG-Praha, Myco the H37Ra, Myco Kansasii, Myco fortuitum and Myco smegmatis. At predetermined time intervals following subcutaneously or intratracheally performed infection (on 7th, 16th, 28th and 56th day after infection) transplantation of a Deals' guinea pig sarcoma cell suspension was carried out in guinea pigs by the intraltracheal route. As it appears from the results gained the applied mycobacteria exhibit a partial inhibition of growth od Deals' guinea pig sarcoma cells of different character. From among the utilized strains the Myco bovis BCP-Praha and the Myco tbc H37Ra exhibited the highest, Myco fortuitum and Myco smegmatis the lowest inhibitory activity. Intratracheally performed infections yielded in general better results on the growth inhibition than infections carried out with the same strain but by the subcutaneous route. Furthermore, in the experiments reported on in the present paper the authors could verify their earlier experience, namely that inhibition of growth of sarcoma cells is most pronounced at the time of maximal biological activity (logarithmic phase of multiplication) of the applied mycobacterium.     

Relationship between the structures of S-acyl thiol compounds and their rates of hydrolysis by pancreatic lipase and hepatic carboxylic esterase

About 100 S-fatty acyl thiol compounds designed as substrates for pancreatic lipase [EC 3.1.1.3] were synthesized and tested for susceptibility to hydrolysis by hog pancreatic lipase and hog hepatic carboxylic esterase [EC 3.1.1.1] using 5,5'-dithiobis(2-nitrobenzoic acid) as a chromogenic reagent to determine the hydrolytic rates of their S-acyl bonds. In general, the hydrolytic rates of S-acyl bonds by the lipase were fast with thioglycerol type thiol moieties, slow with dithioethyleneglycol type or monothiol type, and negligible with thiopolyol type. As for the acyl moieties, the hydrolysis of the S-acyl bonds was fast with C3-5 acyl groups, followed by C6-8 acyl groups, and the rate decreased as the acyl chain length deviated from these values or branched. On the other hand, the hydrolysis of S-acyl bonds by the esterase occurred with all types of S-acyl esters except for esters of long S-acyl chains. Of all the compounds tested with the lipase, the rate of hydrolysis of S-acyl bond was maximum with 2,3-dimercaptopropan-1-ol tributyroate [I], high with 3-mercaptopropane-1,2-diol tributyroate [II], but negligible with the analogous compound, 1,3-dimercaptopropan-2-ol tributyroate. Compounds [I] and [II] may be practically useful as substrates for lipase assay in human serum samples pretreated with phenylmethylsulfonyl fluoride, a potent inhibitor against both serum arylesterase [EC 3.1.1.2] and hepatic esterase, which attack [I] and [II].     

Scattering Characteristics of VHF/UHF Television Broadcasting Waves by Overhead Power Transmission Conductors

The paper analyzes the scattering characteristics of VHF/UHF television broadcasting waves which are obliquely incident on finite length multibundle conductors of overhead power transmission lines. Numerical calculations were made for four-bundle conductors currently employed in Japan; the attenuation, directivity, and frequency characteristics were clarified. To verify the theoretical results, 1:40 scale (for VHF) and 1:10 scale for (UHF) model experiments have been carried out. Agreement between the theoretical results and the measurements was reasonably good.     

Polymer film-type channel electron multipliers: Their characteristics and comparison with bulk-type flexible multipliers

Polymer film-type channel electron multipliers (CEMs) were developed and their characteristics investigated in comparison with bulk-type flexible CEM. As film-type CEMs, a paint-coating-type CEM and a solvent-etching-type CEM were fabricated. The paint-coating-type CEM is made by coating a “paint” which is prepared by dissolving in a solvent an electronically conductive polymeric composition having a high secondary electron emission yield. Up to the present study the mean gain of the film-type CEM, in spite of the lower resistivity of the dynode, seems to be slightly more dependent on the count rate than that of the bulk-type CEM made of the same material. However, the convenience of fabricating the dynode film by coating the dynode-forming paint on the internal surface of any shaped tube or a flexible polymer tube would overcome the slight disadvantage mentioned above.     

Radiation doses to neonates during X ray computed tomography examinations

As the survival rate of newborns has increased, the number of X ray computed tomography (CT) examinations performed on neonates has been increasing. The exposure doses from CT examinations are known to be higher than those from conventional radiography. Although radiation sensitivity of neonates is higher than that of adults, there are few reports on dose estimates of neonates in CT examinations. Four cylindrical phantoms and one neonatal phantom have been developed to estimate doses to neonates during CT examinations. Using these phantoms and glass dosemeters, absorbed doses were measured. Estimated exposure doses to neonates were higher than those to adults, and our results suggest a need to optimise carefully CT examinations in newborns.     

Mid-infrared spectroscopic measurement of ionic dissociative materials in the metabolic pathway

We determine the pH dependency of the mid-infrared spectra in aqueous solution of the organic dissociative materials in the metabolic pathway: saccharide phosphates (G6P, F6P), adenosine, and its phosphates (ATP, ADP, AMP). The series of molar absorbance spectra for these reagents were obtained in a pH range of about 2 to 11 with a Fourier transform infrared (FT-IR) spectrometer equipped with a horizontal diamond attenuated total reflection (ATR) sampling accessory. We also provide a method of infrared spectral extraction of ionic dissociative materials by performing a linear least-square fitting utilizing the formulas of ionic dissociation equilibrium shift, and we obtain the infrared spectrum of each ionic species of the dissociative materials: G6P-, G6P2-; F6P-, F6P2-; ATP2-, ATP3-, ATP4-; ADP-, ADP2-, ADP3-; AMP, AMP-, AMP2-; and adenosine+, adenosine0. The infrared spectral structure of each ionic species of the dissociative materials in the metabolic pathway are discussed. Additionally, the possibility for a quantification system of the concentrations of the organic dissociative materials in varying pH is suggested.     

Experimental exploration of discrepancies in F-number correlation of flammability limits

Flammability limits measurement has been made by ASHRAE method for some 20 kinds of combustible gases and vapors. These compounds have been selected mainly because the literature values of flammability limits are not consistent with the F-number calculated ones [J. Hazard. Mater. A 82 (2001) 113]. As a result, it has been found that the newly obtained values of flammable range are classified into three groups. For the first group of compounds, the present values agree well to the literature values. For the second group, the present values do not agree to the literature values but agree with the calculated ones. For the third group ones, the present values neither agree to the literature values nor to the calculated ones. There are 4, 13, and 6 compounds in the respective groups.     

Formation of Ti<Subscript>3</Subscript>SiC<Subscript>2</Subscript> from Ti-Si-TiC powders by pulse discharge sintering (PDS) technique

Ti/Si/TiC powder mixture with molar ratios of 2:2:3 were sintered at various temperatures from 700–1300 °C for 15 min by PDS technique. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used for the evaluation of phase composition in different samples for the understanding of the sintering mechanism for this system. Results showed that Ti₅Si₃ formed as the intermediate phase during sintering. The reaction between Ti₅Si₃ and TiC as well as Si induces the formation of Ti₃SiC₂, and TiSi₂ appears as the byproduct in this process. At temperature above 1000 °C, TiSi₂ reacts with TiC to form Ti₃SiC₂. High Ti₃SiC₂ phase content bulk material can be synthesized at 1300 °C for 15 min.