Novel control strategies for HVDC system with self-contained converter

This paper discusses newly developed control strategies of a self-commutated converter applied to the HVDC system. An upper and lower power-limited dc voltage control establishes high performance in a two-terminal HVDC system. A voltage margin method to reverse dc transmission power also is introduced. Even when the communication system is shut down, if required, dc transmission power can be changed with the authors' proposed controls applied to the terminal control. Furthermore, the dc voltage control scheme with two-stage voltage control characteristic is presented for multiterminal HVDC system use. When one terminal is collapsed, the multiterminal HVDC system can be operated because of the proposed control characteristics. Simulator studies were carried out to verify the proposed control performance in the two-terminal HVDC system and successful test results such as power reversal and a terminal start-up during other terminal operations are shown.     

Semantic image retrieval for complex queries using a knowledge parser

Multimedia Tools and Applications - In order to improve the retrieval accuracy of image retrieval systems, research focus has been shifted from designing sophisticated low-level feature extraction...     

Enhancement of Thermoelectric Properties in Surface Nanostructures

The thermoelectric properties of TiN/MgO surface nanostructures have been determined using first-principles calculations based on the nonequilibrium Green’s function (NEGF) method. Through structural modification of the surfaces at the atomistic level, we find that the metallic TiN thin-film layer becomes semiconducting with a small bandgap, which enhances the Seebeck coefficient, while the electrical conductivity remains high at room temperature. Hence, a much larger thermoelectric figure of merit is obtained compared with bulk. These findings indicate the possibility of designing thermoelectric devices with surface nanostructures.     

Selective hydrolysis of polyunsaturated fatty acid-containing oil withGeotrichum candidum lipase

Polyunsaturated fatty acids (PUFA), especially docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA), can be concentrated in glycerides by hydrolyzing tuna oil withGeotrichum candidum lipase, the main components in the resulting oil being triglycerides. The reaction mechanism of this selective hydrolysis was investigated. Although the lipase acted well on the esters of oleic, linoleic, and α-linolenic acids, it did not affect the esters of γ-linolenic acid, arachidonic acid, EPA, and DHA as much. The action of PUFA-glycerides was mono-> di- > triglycerides. Furthermore, the condensation of PUFA-partial glycerides and PUFA occurred even in the presence of a large amount of water, and the partial glycerides converted to the triglycerides by transacylation. These results suggested that the PUFA-rich triglycerides were accumulated in the glyceride fraction by the following mechanism: The PUFA-partial glycerides generated by the hydrolysis were converted to PUFA-triglycerides by condensation and transacylation reactions. As the PUFA-triglycerides formed were the poor substrates of lipase, they were accumulated in the reaction mixture.     

Plasma Sphingosine-1-Phosphate Levels Are Associated with Progression of Estrogen Receptor-Positive Breast Cancer

Although numerous experiments revealed an essential role of a lipid mediator, sphingosine-1-phosphate (S1P), in breast cancer (BC) progression, the clinical significance of S1P remains unclear due to the difficulty of measuring lipids in patients. The aim of this study was to determine the plasma concentration of S1P in estrogen receptor (ER)-positive BC patients, as well as to investigate its clinical significance. We further explored the possibility of a treatment strategy targeting S1P in ER-positive BC patients by examining the effect of FTY720, a functional antagonist of S1P receptors, on hormone therapy-resistant cells. Plasma S1P levels were significantly higher in patients negative for progesterone receptor (PgR) expression than in those positive for expression (p = 0.003). Plasma S1P levels were also significantly higher in patients with larger tumor size (p = 0.012), lymph node metastasis (p = 0.014), and advanced cancer stage (p = 0.003), suggesting that higher levels of plasma S1P are associated with cancer progression. FTY720 suppressed the viability of not only wildtype MCF-7 cells, but also hormone therapy-resistant MCF-7 cells. Targeting S1P signaling in ER-positive BC appears to be a possible new treatment strategy, even for hormone therapy-resistant patients.     

Gas entrainment behavior of vertical plunging liquid jets in terms of changes in jet surface length

For a vertical jet system using various liquids, the shape change of liquid jets discharged from nozzles having different nozzle aspect ratios was evaluated in terms of the surface length l_m of the jet flow, and the relation between the change of l_m and the gas entrainment behavior was investigated. It was found that the way of changing of l_m with varying operating conditions or the liquids corresponded well to that of changing of the gas entrainment rate Q_g, that is, the change of l_m of the jet before plunging could be closely related to the change of Q_g.     

Preparation of platinum-ruthenium onto solid polymer electrolyte membrane and the application to a DMFC anode

The ‘impregnation-reduction method’ has been investigated as a tool for the preparation of a direct methanol fuel cell (DMFC) anode. In this method, PtRu electrocatalysts were directly bonded onto a polymer electrolyte membrane by the chemical reduction of a mixture of Pt and Ru complexes impregnated in the membrane. The deposited PtRu particles were embedded in the 3-4 μm region of the membrane surface to form a porous and hydrophilic layer. The PtRu layers turned out to be applicable to the DMFC anode, despite their small active surface areas compared to PtRu nanoparticles used in the conventional method. Approximately, 3 mg cm⁻² of the PtRu layer exhibited better catalyst utilization and facilitated the release of evolving CO₂. This preparation technique is attractive for the application of various solid polymer electrolyte materials with low heat-resistance or various shapes, etc.     

Total Synthesis and Structural Elucidation of Two Unusual Non-Methylene-Interrupted Fatty Acids in Ovaries of the Limpet <Emphasis Type="Italic">Cellana toreuma</Emphasis>

In our previous study, unusual odd‐numbered dienoic acids with a terminal olefin were found as minor components in ovaries of the Japanese limpet Cellana toreuma, and the synthetic interests have been focused onto their structural confirmation and the inspection into their potential biological activity. Here, we describe an efficient and stereoselective total synthesis of two new unusual dienoic acids, 19:2?7,18 and 21:2?7,20, through a common pathway involving the strategic combination of alkyne‐zipper reaction and Lindlar hydrogenation for the construction of their unique carbon chains. In our synthetic study, 2‐propyn‐1‐ol was at first subjected to alkylation and alkyne‐zipper reaction to form the two fragments, and the subsequent carbon chain elongation was achieved by the usual coupling reaction to obtain the C‐19 and C‐21 products bearing an internal acetylenic group. Then, the internal acetylenic group of these products was subjected to Lindlar hydrogenation to form a Z‐alkenyl moiety, and the subsequent deprotection of the products was carried out under an acidic condition without isomerization of the internal Z‐alkenyl group. Total synthesis of target fatty acids, 19:2?7,18 and 21:2?7,20, was finally accomplished by two‐step oxidation of the resulting alcohols into carboxylic acids in a highly chemoselective manner, and the structures of these unusual natural fatty acids were finally elucidated by identifying the GC–MS spectra of the methyl esters of authentic and synthetic fatty acids.     

Comparison of catabolism rate of fatty acids to carbon dioxide in mice

The catabolism rates of a medium chain fatty acid (octanoic acid), an even‐numbered fatty acid (palmitic acid), and odd‐numbered fatty acids (pentadecanoic acid and heptadecanoic acid) in mice were compared using stable isotope (¹³C) labeled fatty acids and isotope‐ratio MS (IRMS). The catabolism rates of respective fatty acids were evaluated by the ratio of ¹³C and ¹²C in carbon dioxide expired from mice. The results show that the catabolism rate of octanoic acid is three times faster than that of palmitic acid. This result is in agreement with previous knowledge that medium chain fatty acids are easily beta‐oxidized as compared to long chain fatty acids. The catabolism rates of odd‐numbered fatty acids such as pentadecanoic acid and heptadecanoic acid were significantly lower as compared to those of even‐numbered fatty acids such as palmitic acid. This finding supports our previous report that odd‐numbered fatty acids are easily accumulated into body fat. The high accumulation of odd‐numbered fatty acids in body fat would be a direct result of their low beta‐oxidizability. Practical applications: ¹³C‐labeled fatty acids were administered to mice and the rates of ¹³CO₂ formation were compared among medium chain, even‐numbered, and odd‐numbered fatty acids using IRMS. We found that the catabolism rates of odd‐numbered fatty acids such as pentadecanoic acid and heptadecanoic acid were significantly lower in comparison to those of even‐numbered fatty acids such as palmitic acid. These findings could be valuable for the development of the lipid metabolism field.     

Reactive compatibilization of biodegradable poly(lactic acid)/poly(ε‐caprolactone) blends with reactive processing agents

Poly(lactic acid) (PLA) blended with poly(ε‐caprolactone) (PCL) was prepared with various reactive processing agents. Four isocyanates‐lysine triisocyanate (LTI); lysine diisocyanate (LDI); 1,3,5‐tris(6‐isocyanatohexyl)‐1,3,5‐triazinane‐2,4,6‐trione (Duranate TPA‐100); 1,3,5‐tris(6‐isocyanatohexyl)biuret (Duranate 24A‐100)‐and an industrial epoxide‐trimethylolpropane triglycidyl ether (Epiclon 725)‐were used as reactive processing agents. PLA/PCL blended in the presence of LTI had the highest torque in a mixer test. The test specimens were prepared by injection molding. The mechanical properties, thermal properties, molecular weight, melt viscosity, phase behavior, and morphology were investigated using tensile strength, impact strength, differential scanning calorimetry, melt mass‐flow rate measurements, capillary rheometery, gel permeation chromatography, laser scanning confocal microscopy (LSCM), and visco‐elasticity atomic force microscopy (VE‐AFM). The impact strength increased considerably at 20 wt% PCL. The nominal tensile strain of PLA/PCL blended with LTI increased by 270%. The MFR values of PLA/PCL blends decreased with increasing LTI. Similar results were observed for shear viscosity. LSCM measurements showed that the diameters of PCL were dispersed about 0.4 μm in the presence of LTI. VE‐AFM showed that spherical particles with diameters of 50 nm were PCL‐rich domain. These results indicate that isocyanate groups of LTI react with both terminal hydroxyl or carboxyl groups of polymers, and the compatibility of PLA/PCL blends improves with LTI by reactive processing. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers