Studies on Effective Utilization of SOFC Exhaust Heat Using Thermoelectric Power Generation Technology

Solid oxide fuel cells (SOFCs) are being researched around the world. In Japan, a compact SOFC system with rated alternative current (AC) power of 700 W has become available on the market, since the base load electricity demand for a standard home is said to be less than 700 W AC. To improve the generating efficiency of SOFC systems in the 700-W class, we focused on thermoelectric generation (TEG) technology, since there are a lot of temperature gradients in the system. Analysis based on simulations indicated the possibility of introducing thermoelectric generation at the air preheater, steam generator, and exhaust outlet. Among these options, incorporating a TEG heat exchanger comprising multiple CoSb₃/SiGe-based TEG modules into the air preheater had potential to produce additional output of 37.5 W and an improvement in generating efficiency from 46% to 48.5%. Furthermore, by introducing thermoelectric generation at the other two locations, an increase in maximum output of more than 50 W and generating efficiency of 50% can be anticipated.     

A high-density NAND EEPROM with block-page programming formicrocomputer applications

A high-density, 5-V-only, 4-Mb CMOS EEPROM with a NAND-structured cell using Fowler-Nordheim tunneling for programming is discussed. The block-page mode is utilized for high-speed programming and easy microprocessor interface. On-chip test circuits for shortening test time and for evaluating cell characteristics yield highly reliable EEPROMs. The NAND EEPROM has many applications for microcomputer systems that require small size and large nonvolatile storage systems with low power consumption     

Built-in folded monopole antenna for handsets

A built-in folded monopole antenna for handsets (BFMA) is introduced and investigated. The characteristics of the BFMA are compared with those of a planar inverted-F antenna (PIFA), which is one of the conventional handset antennas. As a result, it has been confirmed that the BFMA has smaller size and wider bandwidth compared with the PIFA.     

High Precision,Electrochemical Detection of Reversible Binding of Recombinant Proteins on Wide Bandgap GaN Electrodes Functionalized with Biomembrane Models

We report a novel hybrid charge sensor realized by the deposition of phospholipid monolayers on highly doped n‐GaN electrodes. To detect the binding of recombinant proteins with histidine‐tags, lipid vesicles containing chelator lipids were deposited on GaN electrodes pre‐coated with octadecyltrimethoxysilane monolayers. Owing to its optical transparency, GaN allows the confirmation of the fluidity of supported membranes by fluorescence recovery after photo‐bleaching (FRAP). The electrolyte‐(organic) insulator‐semiconductor (EIS) setup enables one to transduce variations in the surface charge density ΔQ into a change in the interface capacitance ΔC _p and, thus, the flat‐band potential ΔU _FB. The obtained results demonstrate that the membrane‐based charge sensor can reach a high sensitivity to detect reversible changes in the surface charge density on the membranes by the formation of chelator complexes, docking of eGFP with histidine tags, and cancellation by EDTA. The achievable resolution of ΔQ ≥ 0.1 μC/cm² is better than that obtained for membrane‐functionalized p‐GaAs, 0.9 μC/cm², and for ITO coated with a polymer supported lipid monolayer, 2.2 μC/cm². Moreover, we examined the potential application of optically active InGaN/GaN quantum dot structures, for the detection of changes in the surface potential from the photoluminescence signals measured at room temperature.     

In situ high-resolution transmission electron microscopy of photocatalytic reactions by excited electrons in ionic liquid

A transmission electron microscope (TEM) sample for observing photocatalysis in a liquid was prepared by using N,N,N-trimetyl-N-propylammonium-bis(trifluoromethanesulfonyl)imide. The ionic liquid (IL) was used as a reaction solvent. Tetrachloroauric acid was dissolved in the IL as gold ion species. Rutile particles were added in the solution as a photocatalyst. The low vapor pressure of the IL enables a diffusing system in high vacuum of TEM. Rutile particles were UV irradiated in that liquid phase. After 3 h UV irradiation, a gold particle of 8 nm diameter was grown on the TiO2 surface. Photonucleation of Au/TiO2 system was discussed from the high-resolution TEM images.     

Organic field-effect transistors based on J-aggregate thin films of a bisazomethine dye

We report on the fabrication and the characterization of p-type organic field-effect transistors based on vapor-deposited J-aggregate bisazomethine dye thin films. The absorption spectra of this non-ionic organic semiconductor in the solid state show a strong influence of the film thickness on the J-aggregate formation. However, the electrical characteristics of the devices demonstrate that the hole transport properties do not vary significantly in films thicker than 100 nm. This is due to the fact that the J-aggregates are formed in this material at the surface of the crystalline grains and do not influence the semiconductor/gate dielectric interface and the charge transport properties of the devices. Hole field-effect mobilities as high as 2.4 × 10^?4 cm² V^?1 s^?1 were obtained and could be slightly improved by a solvent vapor treatment due to changes in the film crystallinity. Overall, this study demonstrates that J-aggregate bisazomethine dye thin films are good candidates for the realization of organic electronic devices.     

Rainfall propagation impairments for medium elevation angle satellite‐to‐earth 12 GHz in the tropics

Rain attenuation is the dominant propagation impairment for satellite communication systems operating at frequencies above about 10 GHz. The rainfall path attenuation at 12.255 GHz measured at Universiti Sains Malaysia (USM) for 4 years (2 January to 5 December) is presented. This paper presents an empirical analysis of rain rate and rain attenuation cumulative distribution functions obtained using 1‐min integrated rainfall data and comparison of the measured data with data obtained from well‐established rain model attenuation predictions. Copyright © 2008 John Wiley & Sons, Ltd.     

Uncooled 25 Gbit/s direct modulation of semi-insulating buried-heterostructure 1.3 μm AlGaInAs quantum-well DFB lasers

Uncooled 25 Gbit/s direct modulation of 1.3 mum DFB lasers is demonstrated. The 150 mum-long semi-insulating buried-heterostructure AIGalnAs quantum-well DFB lasers show clear eye-openings with dynamic extinction ratio of 5 dB up to 70degC. 13 km singlemode-fibre transmission experiments using the devices show low power penalty within 1.3 dB between 25 and 70degC. These characteristics are the first achievement by 1.3 mum directly modulated lasers.     

Fabrication of (Pb,La)(Zr,Ti)O/sub 3/ thin-film arrayed waveguide grating

The design and fabrication of an 8-ch, 500 GHz-spacing arrayed waveguide grating on (Pb,La)(Zr,Ti)O₃ has been successfully achieved for the first time. An insertion loss of 22.1 dB, including a 10 dB coupling loss, and an adjacent crosstalk of -23.1 dB have been obtained. The device is expected to be monolithically integrated into high-speed optical switches to form integrated chips such as a reconfigurable add-drop multiplexer     

HVEM study of crack-tip dislocations in Si crystals prepared by FIB and twin-blade cutting method

Crack-tip dislocations in silicon crystals have been examined by using high-voltage electron microscopy. Cracks were introduced by the Vickers indentation method at room temperature and the indented specimens were annealed at high temperatures to induce dislocations around crack tips under the presence of residual stress due to the indentation. A selected area around a crack tip was thinned by a focused ion beam (FIB) technique. Specimens were thinned in advance by a twin-blade cutting (TBC) method, which is a simple cutting process for saving FIB machine time. A combination of FIB and TBC can be a useful thinning procedure for the efficient preparation of transmission electron microscopy specimens. Characteristic dislocation structures were observed around the tip of a crack, aiding the elucidation of dislocation processes, which is essential to increase the fracture toughness of materials.