The Effect of Small Additions of Fe and Heavy Deformation on the Precipitation in an Al–1.1Mg–0.5Cu–0.3Si At. Pct Alloy

Metallurgical and Materials Transactions A - The effect of 0.03 and 0.08 at. pct Fe additions on the formation of secondary phases in an Al–1.1Mg–0.5Cu–0.3Si at. pct alloy was...     

Laboratory study of air-water-coal combustion product (fly ash and FGD solid) mercury exchange

Recent laboratory research has indicated that coal fly ash derived from subbituminous and bituminous type coals is a sink for atmospheric mercury (Hg), however lignite-based ash was found to emit Hg to the air. Solids collected from systems with components that enhance Hg removal (i.e. activated carbon injection (ACI), flue gas desulfurization (FGD), and selective catalytic reduction (SCR) or selective non-catalytic reduction (SNCR)) may have higher Hg concentrations and therefore a higher potential for Hg release. For this study we investigated the potential for Hg release to the air and water from coal combustion products (CCPs) collected from coal-fired units with FGD equipment, SCR and SNCR equipment, and sorbent injection for Hg removal. In the laboratory study, most dry samples acted as sinks for atmospheric Hg in the dark at 25 °C. When exposed to light or increased temperature (45 °C), deposition of Hg to the fly ash substrates in most cases continued but decreased. Wet FGD samples emitted Hg. However, they became a sink for atmospheric Hg or exhibited low Hg emission rates when dried. Mercury flux in the dark at 25 °C was correlated with fly ash carbon content (LOI). Most liquid extracts derived using the synthetic precipitation leaching procedure (SPLP EPA method 1312) had very low Hg concentrations (<13 ng/l).     

HMM-based state classification of a user with a walking support system using visual PCA features

The improvement of safety and dependability in systems that physically interact with humans requires investigation with respect to the possible states of the user’s motion and an attempt to recognize these states. In this study, we propose a method for real-time visual state classification of a user with a walking support system. The visual features are extracted using principal component analysis and classification is performed by hidden Markov models, both for real-time fall detection (one-class classification) and real-time state recognition (multi-class classification). The algorithms are used in experiments with a passive-type walker robot called “RT Walker” equipped with servo brakes and a depth sensor (Microsoft Kinect). The experiments are performed with 10 subjects, including an experienced physiotherapist who can imitate the walking pattern of the elderly and people with disabilities. The results of the state classification can be used to improve fall-prevention control algorithms for walking support systems. The proposed method can also be used for other vision-based classification applications, which require real-time abnormality detection or state recognition.     

Face relighting using discriminative 2D spherical spaces for face recognition

As part of the face recognition task in a robust security system, we propose a novel approach for the illumination recovery of faces with cast shadows and specularities. Given a single 2D face image, we relight the face object by extracting the nine spherical harmonic bases and the face spherical illumination coefficients by using the face spherical spaces properties. First, an illumination training database is generated by computing the properties of the spherical spaces out of face albedo and normal values estimated from 2D training images. The training database is then discriminately divided into two directions in terms of the illumination quality and light direction of each image. Based on the generated multi-level illumination discriminative training space, we analyze the target face pixels and compare them with the appropriate training subspace using pre-generated tiles. When designing the framework, practical real-time processing speed and small image size were considered. In contrast to other approaches, our technique requires neither 3D face models nor restricted illumination conditions for the training process. Furthermore, the proposed approach uses one single face image to estimate the face albedo and face spherical spaces. In this work, we also provide the results of a series of experiments performed on publicly available databases to show the significant improvements in the face recognition rates.     

Studies on relationship between activity and electron density on carbonyl oxygen in sex pheromone mimics of the American cockroach,part XI

From the relationship between structures of the 2-substituents of verbanyl analogs and their sex pheromone activities to the American cockroach, electron density of the carbonyl oxygen atom in the substituent, as estimated by the [¹⁷O]NMR chemical shift, was estimated to be an important factor which influenced the activity, in addition to length of the substituent and the position of the carbonyl group. (+)-Verbanyl methylcarbonate (XX), possessing the highest electron density on the carbonyl oxygen atom, showed the strongest activity among the analogs.For Part X, see Manabe et al., 1983. J. Chem. Ecol. 9:533–549.     

Mie scattering from sphere structures in polymer blends

Polymer blends of transparent poly(methyl methacrylate) and polystyrene become opaque due to light scattering at the boundaries of the two polymers. The polymer blend is light brown when it is illuminated by white light. The coloring depends on the spherical domain structures existing in the polymer blend. The coloring was analyzed by using the rigorous Mie theory. The Mie results were compared with the semiempirical results previously reported by the authors. The wavelength dependence of theoretical scattering efficiencies on radii of scattering spheres from 0.05 to 1.2 μm was obtained for polystyrene spheres in poly(methyl methacrylate) matrix, and vice versa. The scattering at the short wavelength region is stronger than at the long wavelength region. The scattering efficiencies become almost constant in the visible wavelength region for sufficiently large spheres.     

The effect of the N-linked glycans on structural features and physicochemical functions of soybean β-conglycinin homotrimers

β-Conglycinin is a trimeric protein consisting of three subunits, α,α′,and β, which are N-glycosylated. The α and α′ subunits contain extension regions in addition to core regions common to all subunits. We purified homogeneous trimers consisting of only α, α′, or β from mutant soybean cultivars containing β-conglycinin lacking one or two subunits: α homotrimers from an α′-lacking mutant, α′ homotrimers from an α-lacking mutant, and β homotrimers from an α-and α′-lacking mutant. Structural features and physicochemical functions of the three homotrimers were examined and compared with those of recombinant homotrimers having no N-linked glycans. The native homotrimers have secondary structures very similar to those of the recombinant ones. In analogy with the recombinant homotrimers, the native ones exhibit different thermal stabilities from one another (β>α′>α), and the native α and α′ homotrimers exhibit better solubility, emulsifying ability, and heat-induced association than the native β homotrimer. Further, the N-linked glycans contribute to solubilities of the three subunits at low ionic strength (μ=0.08) and to the emulsifying ability of the native β homotrimer. N-Linked glycans also prevent heat-induced associations of the native α and α′ homotrimers but do not contribute to the secondary structure and the thermal stability of β-conglycinin.     

Preparation of plasma-polymerized membranes from I-(trimethylsilyl)-I-propyne and gas permeability through the membranes

Summary Plasma-polymerized membranes for gas separation were prepared from 1-(trimethylsilyl)-1-propyne. The permeation data of He, H₂ 0₂, N₂, CO₂, and CH₄ through the membranes showed plasma-polymerized 1-(trimethylsilyl)-1-propyne had high permselectivity but low permeability compared with poly[l-(trimethylsilyl)-1-propyne]. This behavior is considered to be due to the crosslinking structure of the plasma-polymerized membrane. The correlation between plasma polymerization conditions and the membrane performance was studied. The optimum condition at which the deposition rate of the plasma polymer is maximized agreed with the optimum value to yield maximum separation factor of gases through the membrane.     

Improvement of Pt/ZrO2 by CeO2 for high pressure CH4/CO2 reforming

CH₄/CO₂ reforming over Pt/ZrO₂, Pt/CeO₂ and Pt/ZrO₂ with CeO₂ was investigated at 2 MPa. Pt/ZrO₂, which shows stable activity under 0.1 MPa, and Pt/CeO₂ showed gradual deactivation with time at the high pressure. The deactivation was suppressed drastically on Pt/ZrO₂ with CeO₂ prepared by different impregnation order (co-impregnation of Pt and CeO₂ on ZrO₂, and consecutive impregnation of Pt and CeO₂ on ZrO₂). The amount of coke deposition was found insignificant and similar among all the catalysts (including Pt/ZrO₂ and Pt/CeO₂). Catalytic activity after the reaction for 24 h was in agreement with Pt particle size after the reaction for same period, indicating that the difference of the catalytic stability is mainly dependent on the extent of Pt aggregation through catalyst preparation, H₂ reduction, and the CH₄/CO₂ reforming. Pt aggregation and the amount of coke deposition were least pronounced on (Pt–Ce)/ZrO₂ prepared by impregnation of CeO₂ on Pt/ZrO₂ and the catalyst showed highest stability.     

Synthesis and properties of novel side-chain-sulfonated polyimides from bis[4-(4-aminophenoxy)-2-(3-sulfobenzoyl)]phenyl sulfone

A novel side-chain-sulfonated aromatic diamine of bis[4-(4-aminophenoxy)-2-(3-sulfobenzoyl)]phenyl sulfone (BAPSBPS) was synthesized. Sulfonated copolyimides were synthesized by random and sequenced block copolymerization of 1,4,5,8-naphthalene tetracarboxylic dianhydride, BAPSBPS and nonsulfonated diamine. They displayed good solubility in common aprotic solvents and high desulfonation temperature of 350 °C, suggesting the high stability of sulfonic acid groups. The reduced viscosity was in the range of 0.4-1.8 dl/g at 0.5 g/dl and 35 °C. Flexible and tough membranes with reasonably high mechanical strength were prepared. They showed anisotropic membrane swelling with larger swelling in thickness than in plane. They displayed reasonably high proton conductivity (σ), taking their lower ion exchanging capacity (IEC) into account. For example, the membrane with IEC of 1.54 mequiv/g showed σ values of 81 and 11 mS/cm in water and 70% RH, respectively, at 60 °C.