Porous cellulose acetate membrane prepared by thermally induced phase separation

Microporous cellulose acetate membranes were prepared by a thermally induced phase separation (TIPS) process. Two kinds of cellulose acetate with acetyl content of 51 and 55 mol % and two kinds of diluents, such as 2‐methyl‐2,4‐pentandiol and 2‐ethyl‐1,3‐hexanediol, were used. In all polymer‐diluent systems, cloud points were observed, which indicated that liquid–liquid phase separation occurred during the TIPS process. The growth of droplets formed after the phase separation was followed using three cooling conditions. The obtained pore structure was isotropic, that is, the pore size did not vary across the membrane. In addition, no macrovoids were formed. These pore structures were in contrast with those usually obtained by the immersion precipitation method. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3951–3955, 2003     

Serial Changes of Serum Growth Factor Levels and Liver Regeneration after Partial Hepatectomy in Healthy Humans

This study aimed to investigate the associations of the serial changes of serum levels of various growth factors with liver regeneration after hepatectomy in healthy liver donors. Sixteen healthy liver donors who underwent conventional liver resection were included. Serum levels of various growth factors before hepatectomy and on postoperative day (POD) 1, 3, 5 and 7 were measured. Liver volume data calculated by multi-detector computed tomography using workstation. The ratio of remnant liver volume on POD 0 to liver volume before the operation was 51% ± 20%. The ratio of liver volume on POD 14 to liver volume on POD 0 were inversely correlated with remnant liver volume on POD 0 (r = −0.91). The ratio of liver volume on POD 14 to liver volume on POD 0 were significantly correlated with serum hepatocyte growth factor (HGF) levels on POD 1 (r = 0.54), serum leptin levels on POD 1 (r = 0.54), and serum macrophage colony-stimulating factor (M-CSF) levels on POD 5 (r = 0.76) and POD 7 (r = 0.80). These results suggest that early-phase elevation of serum levels of HGF, leptin and M-CSF may be associated with the acceleration of liver regeneration after hepatectomy in humans.     

Scandium-Doped Anatase (TiO2) Nanoparticles Directly Formed by Hydrothermal Crystallization

Anatase-type TiO₂ solid solutions doped with 0–10 mol% scandium were formed by hydrothermal crystallization under weak basic conditions above 180°C for 5 h from amorphous co-precipitates that were obtained from the aqueous precursor solutions of TiOSO₄ and Sc(NO₃)₃ using aqueous ammonia. The anatase particles were spindle-like and consisted of nanosized-crystallites (23–25 nm). The lattice parameter c ₀ of anatase and the length and width of the spindle-like anatase gradually increased when the scandium content was increased. The diffuse reflectance spectra of the as-prepared TiO₂ doped with scandium showed that the onset of absorption slightly shifted to longer wavelengths with increasing scandium content. The band gap of anatase was slightly increased by making solid solutions with scandium oxide.     

Evaluation of mixing profiles for a new micromixer design strategy

The relationship between mixing history and reaction performance in microreactors using computational fluid dynamics (CFD) simulations is identified. In the idealized, simplified mixing model, mixing proceeds linearly and only the mixing time determined the reaction performance. However, in the case of realistic models where mixing proceeds unequally, the partial rapid progression of mixing, more than the mixing time, significantly impacts the reaction. The use of the fluid segment size distribution to capture this effect is proposed. The effective Damköhler number derived from the fluid segment size distribution predicted the reaction yield well. To demonstrate the utility of the mixing profile design strategy, we fabricated a novel micromixer with multiple partial rapid mixing zones. This micromixer achieved excellent results both in a CFD simulation and an experiment. © 2015 American Institute of Chemical Engineers AIChE J, 62: 1154–1161, 2016     

Structure and Viscosity of Grain Boundary in High-Purity SiAlON Ceramics

Three high-purity SiAlON materials (Si_{6− z} Al _z O _z N_{8− z} , z = 1, 2, 3) were characterized with respect to both structure and viscous behavior of internal grain boundaries. Internal friction experiments provided a direct measure of the intrinsic viscosity of grain boundaries and concurrently revealed the occurrence of a grain-boundary interlocking mechanism that suppressed sliding. A residual glass phase (consisting of aluminum-rich SiO₂) and nanometer-sized mullite residues were found at glassy triple-grain junctions of the z = 1 SiAlON. A low-melting intergranular phase dominated the high-temperature behavior of this material and caused grain-boundary sliding at temperatures as low as 1100°C. A quantitative analysis of the grain-boundary internal friction peak as a function of oscillation frequency indicated an intergranular film viscosity of log η∼ 7.5 Pa · s at 1100°C. Glass-free grain boundaries were a characteristic of SiAlON materials with z ≥ 2, which yielded a significant improvement in refractoriness as compared to the z = 1 SiAlON material. In these materials, relaxation resulting from grain-boundary sliding was suppressed, and the internal friction curve simply experienced an exponential-like increase.     

Responsiveness of electric resistance of polymer-grafted carbon black/alumina gel composite against solvent vapor and solute in solution

The carbon black/alumina gel composites were prepared by sol-gel reaction of aluminum isopropoxide in the presence of polymer-grafted carbon black. The electric resistance of the alumina gel composite from polymer-grafted carbon black was very sensitive to vapor of good solvent for grafted polymer on carbon black: the electric resistance of the alumina gel composite suddenly decreased in solvent vapor and returned to initial resistance when it was transferred into dry air. The effect of surface area and particle size of carbon black on the responsiveness was also investigated. In addition, the electric resistance of the alumina gel composite was found to respond to water and methanol in n-hexane and diethyl ether.     

Improvement of Pt/ZrO2 by CeO2 for high pressure CH4/CO2 reforming

CH₄/CO₂ reforming over Pt/ZrO₂, Pt/CeO₂ and Pt/ZrO₂ with CeO₂ was investigated at 2 MPa. Pt/ZrO₂, which shows stable activity under 0.1 MPa, and Pt/CeO₂ showed gradual deactivation with time at the high pressure. The deactivation was suppressed drastically on Pt/ZrO₂ with CeO₂ prepared by different impregnation order (co-impregnation of Pt and CeO₂ on ZrO₂, and consecutive impregnation of Pt and CeO₂ on ZrO₂). The amount of coke deposition was found insignificant and similar among all the catalysts (including Pt/ZrO₂ and Pt/CeO₂). Catalytic activity after the reaction for 24 h was in agreement with Pt particle size after the reaction for same period, indicating that the difference of the catalytic stability is mainly dependent on the extent of Pt aggregation through catalyst preparation, H₂ reduction, and the CH₄/CO₂ reforming. Pt aggregation and the amount of coke deposition were least pronounced on (Pt–Ce)/ZrO₂ prepared by impregnation of CeO₂ on Pt/ZrO₂ and the catalyst showed highest stability.     

Role of Cu film texture in grain growth correlated with twin boundary formation

To understand the role of Cu film texture in grain growth at room temperature (RT) in relation to twin boundary formation Cu films were deposited on various barrier materials and the Cu film texture was investigated by X-ray diffraction. Cu grain growth was rapid on a barrierless SiO₂/Si substrate and very slow on a Ta barrier due to strong (1 1 1) texture. The growth rate and the average grain diameter after being kept at RT for up to ∼60 days were maximum at a (2 0 0)_Cu peak to (2 2 2)_Cu peak area ratio of ∼1.0, where {1 1 1}, {1 0 0} and {5 1 1} grains coexisted. Such coexistence of three or more orientations of grains is essential in facilitating Cu grain growth at RT. Similarly, the average twin boundary (TB) density was maximum when Cu grain growth was facilitated. TB formation in nano-sized Cu grains was not controlled by grain size, but due to grain growth. The TB could be annealing twins caused by irregularities in the stacking sequence during relatively fast grain growth. The Cu film texture is concluded to be determined at the beginning of deposition, and the wettability of various barrier materials by the Cu films plays a key role in determining the film texture.     

Multi-walled carbon nanotube-reinforced copper nanocomposite coating fabricated by low-pressure cold spray process

Multi-walled carbon nanotube (MWCNT)-reinforced copper (Cu) nanocomposite coatings were successfully deposited on aluminum (Al) substrate by a cold spraying process at a low pressure. The microstructure and the Raman spectrum of the low-pressure-cold-sprayed MWCNT–Cu nanocomposite coating showed that the MWCNTs maintained their tube structure in the Cu matrix, even though structural damage to the MWCNTs increased slightly. MWCNT–Cu nanocomposite-coated Al exhibits higher thermal diffusivity than pure-Cu-coated Al with a comparable hardness. The higher thermal diffusivity of the MWCNT–Cu coating could be explained by the dispersion of MWCNTs within the clean and closed CNT/Cu interfaces, which were achieved with the aid of compressive stress during the cold spraying.     

Electron spin resonance of thin films of organic light-emitting material tris(8-hydroxyquinoline) aluminum doped by magnesium

We have successfully observed electron spin resonance (ESR) signals of radical anions in thin films of tris(8-hydroxyquinoline) aluminum (Alq₃), a compound widely used as electron transporting and luminescent layers in organic light-emitting diodes. To obtain definitely defined radical-anion states in Alq₃, we doped Alq₃ with Mg by co-evaporating these materials. The obtained g value and peak-to-peak ESR linewidth ΔH_pp of Alq₃ radical anions are 2.0030 and 2.19 mT, respectively. Theoretical g value and hyperfine interactions were calculated by density functional theory method, which are in good agreement with the experimental results. A quantitative evaluation of doping concentration was performed. We confirmed that doped charges are localized at deep trapping sites by the lineshape analysis and temperature dependence of the ESR signals. Morphological investigation using transmission electron microscopy clarified that the co-evaporated Mg atoms form clusters.