Silica films with a single-crystalline mesoporous structure

Films of mesoporous materials attract broad interest because of their wide applicability in the fields of optics and electronics. Although many of these films have a regular local porous structure, the structural regularity has not been used practically yet because of difficulties in its control on macroscopic scales. Here, we demonstrate the preparation of mesoporous silica films whose porous structure can be described as a single crystal, that is, a long-range order of cage-like pores is maintained over centimetre scales. These films have a three-dimensional hexagonal (space group P6(3)/mmc) porous structure, and the in-plane arrangement of the pores is strictly controlled by a polymeric substrate surface that has been treated by rubbing. This new class of single-crystalline films with mesoscopic periodic structure is a significant breakthrough in bottom-up nanotechnology, and could lead to novel devices, for example, optics in a soft X-ray region, and quantum electronics.     

Atmospheric mercury emissions and speciation at the sulphur bank mercury mine superfund site, Northern California

One pathway for release of mercury (Hg) from naturally enriched sites is emission to the atmosphere. Elemental Hg, when emitted, will enter the global atmospheric pool. In contrast, if reactive gaseous Hg or Hg2+ (as HgCl2, HgBr2, or HgOH2) is formed, it will most likely be deposited locally. This study focused on the measurement of elemental Hg flux and reactive gaseous Hg concentrations at the Sulphur Bank Superfund Site, an area of natural Hg enrichment with anthropogenic disturbance and ongoing geothermal activity. Mean Hg emissions ranged from 14 to 11000 ng m(-2) h(-1), with the highest emissions from anthropogenically disturbed materials. Reactive gaseous Hg concentrations were the highest ever reported for a natural setting (0.3-76 ng m(-3)). Measured Hg fluxes were used within a Geographic Information System to estimate mercury releases to the atmosphere from the site. Results indicated approximately 17 kg of Hg y(-1) of is emitted to the atmosphere from the 3.8 km2 area, with half from mine waste, ore, and tailing piles and half from relatively undisturbed naturally enriched substrate.     

Fluorogenic derivatization reagents suitable for isolation and identification of cysteine-containing proteins utilizing high-performance liquid chromatography-tandem mass spectrometry

The fluorogenic derivatization reagents with a positive charge, 4-(dimethylaminoethylaminosulfonyl)-7-chloro-2,1,3-benzoxadiazole (DAABD-Cl) and 7-chloro-2,1,3-benzoxadiazole-4-sulfonylaminoethyltrimethylammonium chloride (TAABD-Cl), are proposed for use in proteomics studies. Following derivatization of protein mixtures with these reagents, a series of standard processes of isolation, digestion, and identification of the proteins were performed utilizing high-performance liquid chromatography-fluorescence detection and tandem mass spectrometry with the probability-based protein identification algorithm. Both DAABD and TAABD derivatives were detected fluorometrically at the femtomole level and showed more than 100-fold improvement in sensitivity compared to the underivatized original compounds with an electrospray ionization ion trap mass spectrometer analysis. The modification of the MASCOT database search system memorized with the fragment information of a DAABD-attached Cys residue allowed the identification of the proteolytic peptide fragments of the derivatized bovine serum albumin (BSA) with an estimated 38% sequence coverage of BSA. Utilizing DAABD-Cl as a derivatization reagent, identification of several proteins was also possible in a soluble extract of Caenorhabditis elegans (10 microg of protein). Consequently, for identification of proteins in the complex matrixes of proteins, DAABD-Cl could be a more appropriate reagent than ammonium 7-fluoro-2,1,3-benzoxadiazole-4-sulfonate as reported previously.     

Delivery of medical multimedia contents through the TCP/IP network using RealSystem

We developed a low cost, user-friendly multimedia delivery system, to provide medical lectures saved as multimedia contents to persons engaged in medicine. This system was created using the RealSystem package with the TCP/IP network. Users can review lectures and medical meeting presentations with video and audio through the Internet, whenever convenient. Each medical source of video and slide has been clearly displayed on a screen. Members of medical associations or medical students can easily review the most interesting parts of these files. This system is being used efficiently in distance learning and aids the diffusion of the latest information and technology to busy physicians and medical students.     

Simultaneous determination of five penicillins in muscle,liver and kidney from slaughtered animals using liquid chromatography coupled with electrospray ionization tandem mass spectrometry

A simple and rapid method for the simultaneous determination of five penicillins (ampicillin, penicillin G, penicillin V, oxacillin and cloxacillin) in muscle, liver and kidney tissues using high-performance liquid chromatography-electrospray tandem mass spectrometry (LC-ESI-MS/MS) was developed. Mass spectral acquisition was done in the negative ion mode by applying selected reaction monitoring (SRM). The five penicillins were extracted with water, and the extracted solution was cleaned up on a C18 cartridge. Phenethicillin was added as an internal standard, and the extract was diluted with water for injection into the LC-ESI-MS/MS. The recoveries of the five penicillins were in the range of 77.3-99.8% from muscle, liver and kidney fortified at 10-250 ng/g. The detection limits for ampicillin were 6 ng/g in muscle and kidney and 15 ng/g in liver. For penicillin G and penicillin V, the detection limits were 2 ng/g in muscle and kidney and 5 ng/g in liver. For oxacillin and cloxacillin, the detection limits were 4 ng/g in muscle and kidney and 10 ng/g in liver. Twenty-three muscle, fourteen liver and twenty-two kidney samples from the markets were analyzed by this method. No penicillins were detected in any sample.     

Temperature Dependence of the Velocity of Sound in Liquid Metals of Group XIV

The temperature dependences of the velocity of sound in liquid Pb, Sn, Ge, and Si have been measured by means of the pulse transmission technique over temperature ranges of 610–1078 K, 608–1463 K, 1215–1443 K, and 1723–1888 K, respectively. In both liquid Pb and Sn, the velocities of sound decrease linearly with increasing temperature, which is the same temperature dependence as shown in many other liquid metals. On the other hand, the velocities of sound in liquid Ge and Si exhibit anomalous temperature dependences. In Ge, the velocity of sound has a distinct maximum around 1280 K and decreases linearly at higher temperatures. In Si, the velocity of sound increases monotonically with increasing temperature in the temperature range investigated. It is considered that these results predict that the coordination numbers of liquid Ge and Si increase with increasing temperature.     

Control and Navigation Framework for Quadrotor Helicopters

This paper presents the development of a nonlinear quadrotor simulation framework together with a nonlinear controller. The quadrotor stabilization and navigation problems are tackled using a nested loops control architecture. A nonlinear Backstepping controller is implemented for the inner stabilization loop. It asymptotically tracks reference attitude, altitude and heading trajectories. The outer loop controller generates the reference trajectories for the inner loop controller to reach the desired waypoint. To ensure boundedness of the reference trajectories, a PD controller with a saturation function is used for the outer loop. Due to the complexity involved in controller development and testing, a simulation framework has been developed. It is based on the Gazebo 3D robotics simulator and the Open Dynamics Engine (ODE) library. The framework can effectively facilitate the development and validation of controllers. It has been released and is available at Gazebo quadrotor simulator (2012).     

Sensorless vector controlled converter for variable speed wind generation system using an induction generator

This paper proposed two types of speed sensorless converters that can control rotational speed and electric power. One is based on a slip frequency control system. The other is based on a vector control system. The rotational speed of the wind turbine is estimated with the phase voltage and phase current of the induction generator by the adaptive rotor flux observer. The estimated wind turbine rotational speed ω_r^est is used as the feedback of the speed control loop in the converter control system. Also, the estimated rotor flux ?_2d^est is used for the vector control. The simulation results confirm that both of them perform satisfactorily under the speed sensorless operation. The method based on the vector control system generates more electrical energy than does the method based on the slip frequency control system. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(4): 62–75, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20323     

Externally resonated linear microvibromotor for microassembly

A new method for on-substrate fine positioning of microscale/mesoscale discrete components is presented, where component positions are finely adjusted using microlinear sliders and fixtures on the substrate. Each microlinear slider is actuated by vibratory impacts exerted by two pairs of microcantilever impacters. These microcantilever impacters are selectively resonated by shaking the entire substrate with a piezoelectric vibrator, requiring no need for built-in driving mechanisms such as electrostatic comb actuators, as reported previously. This selective resonance of the microcantilever impacters via an external vibration energy field provides with a very simple means of controlling forward and backward motion of the microlinear slider, facilitating assembly and disassembly of a microcomponent on a substrate. An analytical model of the device is derived in order to obtain, through the simulated annealing algorithm, an optimal design, which maximizes translation speed of the linear slider at desired external input frequencies. Prototypes of the externally resonated linear microvibromotor are fabricated using the three-layer polysilicon surface micromachining process provided by the Microelectronics Center of North Carolina, Research Triangle Park, NC, multiuser microelectromechanical processes service. These prototypes are tested for forward and backward motion via external vibration applied by an piezoelectric flexure vibrator, as well as the horizontal positioning and release of 500-μm-square polysilicon chips against a reference fixture element anchored to the substrate     

Characteristics of porous polymer composite columns prepared by radiation cast-polymerization

Porous polymer composite columns having porous structure were prepared by radiation cast-polymerization of hydrophilic monomers at low temperature and their characteristics were studied. The porosity of the polymer increased with decreasing monomer concentration. The elution time of water in the polymer column increased with increasing monomer concentration and with decreasing irradiation temperature. The elution time was dependent on the degree of hydration of the polymer. The polymer with a degree of hydration of 0.2 to 0.4 gave the minimum elution time. The elution time decreased with the addition of porous inorganic substances.