Specification of individual variation in luminous efficiency for brightness

Principal component analysis was applied to spectral luminous efficiencies determined by the heterochromatic brightness matching by 51 and 70 observers for the field size. 2° and 10°, respectively, which were used to derive the CIE V_b,2(Λ) and V_b,10(Λ). Four principal components were found to explain the individual variation. the two deviation indices were introduced by slightly modifying the first and second principal scores and they were effectively used to specify individual variations and to predict the spectral luminous efficiency curve. Equations were derived to predict these two deviation indices as functions of luminous efficiencies at two wavelengths, 460 and 640 nm in the case of 2° field and 470 and 630 mm in 10° field. the luminous efficiency curves thus predicted by the two deviation indices fitted very nicely to the experimentally determined luminous efficiency curves of all the observers. A way to utilize the deviation indices in practice where observers play an important role is proposed to avoid some confusion that may take place because of individual variation.     

Synthesis and chemical properties of polyethyleneimines crosslinked by penta-2,4-dienylideneammonium unit

The reaction of N-(2,4-dinitrophenyl)pyridinium anion ( salt(A) ; A = Cl⁻, FeCl₄⁻, and (CN)₂N⁻) with linear polyethyleneimine (LPEI; M_n = 20 380) and branched polyethyleneimines (BPEI1; M_n = 600, BPEI2; M_n = 10 000) at various molar feed ratios without using a catalyst resulted in pyridinium ring opening to yield ionic LPEI and BPEIs that were crosslinked by conjugated penta-2,4-dienylideneammonium (PDA) units, LPEI-PDA , BPEI1-PDA , and BPEI2-PDA , respectively. A model compound was synthesized by the reaction of salt(Cl) with diethylamine. The solubilities of BPEI1-PDA and BPEI2-PDA depended on the feed ratios between salt(Cl) and BPEI1 or BPEI2. Dipping LPEI-PDA into water and methanol yielded hydro- and organogels, respectively. UV–vis and reflection measurements revealed an expanded π-conjugation length between the polymer chains due to the through-space orbital interaction of the electrons on the two nitrogen atoms at the crosslinked positions in LPEI-PDA , BPEI1-PDA , and BPEI2-PDA . Cyclic voltammetry analysis suggested that the polymers underwent electrochemical oxidation. Measurement using a superconducting quantum interference device (SQUID) indicated that LPEI-PDA having FeCl₄⁻ anions was paramagnetic. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48712.     

Visible-light-active titanium oxide photocatalyst realized by an oxygen-deficient structure and by nitrogen doping

A visible-light (vis)-active titanium oxide photocatalyst was prepared by a simple wet process: the calcination of the hydrolysis product of Ti(SO₄)₂ with ammonia using an ordinary electric furnace in dry air at 400 °C. The color of this photocatalyst was vivid yellow and absorbed light in the blue (400 nm) to bluish-green (550 nm) region exclusively. Its structure was characterized to anatase with oxygen-deficient stoichiometry by XRD and X-ray photoelectron spectroscopy. Nitrogen was also detected, but only in trace amounts. Using blue-light-emitting diodes as a light source, 540 ppm of acetone was decomposed within 36 h and a stoichiometric yield of CO₂ was obtained. From the results of the crystalline size D, it was found that vis-activity could be realized on polycrystalline particles and the grain-boundaries (GBs) are thought to be important, since oxygen vacancies are easily created in GBs, which could form a GB state. Finally, we concluded that oxygen-deficient sites formed in GBs are important to emerge vis-activity, and nitrogen doped in the part of oxygen-deficient sites are important as a blocker for reoxidation.     

Toughening of Silicon Nitride Matrix Composites by the Addition of Both Silicon Carbide Whiskers and Silicon Carbide Particles

Si₃N₄ matrix composites reinforced by SiC whiskers, SiC particles, or both were fabricated using the hot-pressing technique. The mechanical properties of the composites containing various amounts of these SiC reinforcing materials and different sizes of SiC particles were investigated. Fracture toughness of the composites was significantly improved by introducing SiC whiskers and particles together, compared with that obtained by adding SiC whiskers or SiC particles alone. On increasing the size of the added SiC particles, the fracture toughness of the composites reinforced by both whiskers and particles was increased. Their fracture toughness also showed a strong dependence on the amount of SiC particles (average size 40 μm) and was a maximum at the particle content of 10 vol%. The maximum fracture toughness of these composites was 10.5 MPa·m^1/2 and the flexural strength was 550 MPa after addition of 20 vol% of SiC whiskers and 10 vol% of SiC particles having an average particle size of 40 μm. These mechanical properties were almost constant from room temperature to temperatures around 1000°C. Fracture surface observations revealed that the reinforcing mechanisms acting in these composites were crack deflection and crack branching by SiC particles and pullout of SiC whiskers.     

Crystallization behavior of poly(l-lactic acid)

The crystallization behavior of poly(l-lactic acid) was studied in the range of 80-160 °C. The peak crystallization time (τ_p) was defined and obtained from the crystallization isotherm measured with a differential scanning calorimeter (DSC). Isothermal crystallization temperature (T_c) dependence of log(τ_p) discretely changed at 113 °C (= T_b). The linear growth rate of spherulite, G, was measured with a polarizing microscope. The T_c dependence of G and the size of the spherulite also discretely changed at T_b. Crystal structures for samples isothermally crystallized at temperatures which were higher and lower than T_b were orthorhombic (α-form) and trigonal (β-form), respectively. The discrete change of the crystallization behavior was explained by the formation of different crystal.     

Effect of copper pretreatment on the zincate process and subsequent electroplating of a protective copper/nickel deposit on the AZ91D magnesium alloy

To obtain a durable Ni coating with excellent adhesion strength on an AZ91D Mg alloy, a pretreatment was performed with a small amount of Cu²⁺ ions added to the activation bath used in the pretreatment prior to the plating process. In the pretreatment activation process, a high density Cu layer was deposited on both the α-phase and β-phase areas of the substrate accompanied with Mg dissolution. The Cu deposit acted as nucleation seeds for the Zn deposition in the following zincate process which provided a uniform and dense Zn layer almost completely covering the substrate. Then a thin Cu layer was electroplated on this zincated substrate as an undercoating for the succeeding electroplating with Ni. Cross-sectional scanning electron microscopy observations showed that the Cu deposited by the pretreatment enabled the deposition of a protective Ni layer with few defects. This structure also contributed to the improvement of adhesion strength and corrosion resistance as compared with the non-Cu added sample.     

Metastatic Voyage of Ovarian Cancer Cells in Ascites with the Assistance of Various Cellular Components

Epithelial ovarian cancer (EOC) is the most lethal gynecologic malignancy and has a unique metastatic route using ascites, known as the transcoelomic root. However, studies on ascites and contained cellular components have not yet been sufficiently clarified. In this review, we focus on the significance of accumulating ascites, contained EOC cells in the form of spheroids, and interaction with non-malignant host cells. To become resistant against anoikis, EOC cells form spheroids in ascites, where epithelial-to-mesenchymal transition stimulated by transforming growth factor-β can be a key pathway. As spheroids form, EOC cells are also gaining the ability to attach and invade the peritoneum to induce intraperitoneal metastasis, as well as resistance to conventional chemotherapy. Recently, accumulating evidence suggests that EOC spheroids in ascites are composed of not only cancer cells, but also non-malignant cells existing with higher abundance than EOC cells in ascites, including macrophages, mesothelial cells, and lymphocytes. Moreover, hetero-cellular spheroids are demonstrated to form more aggregated spheroids and have higher adhesion ability for the mesothelial layer. To improve the poor prognosis, we need to elucidate the mechanisms of spheroid formation and interactions with non-malignant cells in ascites that are a unique tumor microenvironment for EOC.     

資源環境の保全をめざした二次副産材を導入するコンクリ一ト材料の発展的利用に関する研究

日本では,21世紀半ばに人工の固体物質の代表である解体コンクリート塊の排出量がピークを迎えると同時に,最終処分が困難になる状況が想定されていることから,コンクリート材料の完全資源型の利活用要求はより一層高まるといえる.本研究は,副産微粉,再生骨材などの二次副産材を積極的に混和し,同一産地*種類型の調合条件のもとで,コンクリートの物性改善,資源有効利活用を目的としたコンクリートを製造し,その基礎的物性の評価と環境影響評価を行い,環境保全に資するコンクリート材料の発展的利用のあり方を検討した.