Dynamic Characteristics Analysis of Two‐DOF Oscillatory Actuator and Experimental Verification of Prototype

Recently, linear oscillatory actuators have been used in a wide range of applications. In particular, small linear oscillatory actuators are expected to be used in haptic devices by being extended to provide multi‐degree‐of‐freedom motion with arbitrary acceleration. In this paper, we propose a compact two‐DOF oscillatory actuator that can move in various directions on a plane. The static and dynamic characteristics of the actuator are determined by the 3D finite element method. The effectiveness of this method is shown through a comparison of the measured results with the experimental results from a prototype. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(1): 58–65, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22312     

Pulsed Laser Processing of Carbon and Silicon Clusters and Thin Films

Abstract

Several new processes have been developed for the preparation of fullerenes and thin films by using a pulsed excimer laser. The irradiation of a pulsed KrF excimer laser beam onto a C₆₀ powder target produced single phase C₆₀ thin films when the laser energy fluence was in the range between 40 and 50mJ/cm². By atomic force microscopy, the laser-deposited C₆₀ thin film was verified to have a surface far smoother that the surfaces of films produced by the conventional evaporation method. The stainless steel rods coated with this film exhibited an excellent tribological property. Cluster formation from SiC and other carbides MC_n(M=Ti,W,B) was investigated by laser desorption time-of-flight mass spectrometry. No clear indication was observed for the production of such clusters as (SiC)₆₀ and (M_xC_60-x) from the sintered targets directly as well as from the films laser deposited from the targets. However, C₆₀ and C₇₀ were found to exists in the laser-deposited films, indicating a new applicability of pulsed laser processing for segregative cluster synthesis from solid solution. Preliminiary results on thin film deposition via pulsed ablation of (Ba,Na)_xSi₄₆ clathrate were also presented.     

Beat Noise Mitigation of Spectral Amplitude Coding OCDMA Using Heterodyne Detection

In order to relax the limitation of the number of multiplexed signal lights caused by beat noise between signal lights, we investigate the applicability of a heterodyne detection technique to a spectral amplitude coding optical code division multiple access scheme. In this investigation, for the first time, we found analytically that the optical frequency chips that form parts of the signal and local lights require uniform phase differences even for envelope detection. We also confirm this requirement and our theoretical analysis experimentally.     

Novel Video Memory Reduces 45% of Bitline Power Using Majority Logic and Data-Bit Reordering

We propose a low-power two-port SRAM for real-time video processing that exploits statistical similarity in images. To minimize the discharge power on a read bitline, a majority-logic circuit decides if input data should be inverted in a write cycle, so that ldquo1rdquos are in the majority. In addition, for further power reduction, write-in data are reordered into digit groups from the most significant bit group to the least significant bit group. The measurement result of a 68-kbit video memory in a 90-nm process demonstrates that a 45% power saving is achieved on the read bitline. The speed and area overheads are 4% and 7%, respectively.     

High-speed InGaAlAs-InAlAs MQW directional coupler waveguide switchmodules integrated with a spotsize converter having a lateral taper,thin-film core, and ridge

Fully packaged 2×2 and 4×4 semiconductor optical switch modules are successfully developed by integrating spotsize converters (SSCs) consisting of lateral tapers, thin-film cores, and ridges in InGaAlAs-InAlAs multiple quantum-well (MQW) directional coupler waveguide switches in the 1.55-μm wavelength region. Good reproducibility is obtained for the perfect coupling length of the directional coupler by appropriately designing the ridge width and gap of strip-loaded optical waveguides and by making use of the Cl₂ reactive-ion-beam-etching and successive wet-etching. Since the switching time is sufficiently short (<70 ps, which is limited by the driver speed) for the 4×4 switch module, no bits are lost during a 10-Gb/s switching experiment at a wavelength of 1.55 μm     

Controlling the drug release rate from biocompatible polymers with micro-patterned diamond-like carbon (DLC) coating

During the past year, we have witnessed the evolution of an intense public controversy regarding late thrombosis following implantation of drug eluting stent (DES) in patients with obstructive coronary artery disease. To overcome the problem, DES should possess sufficient biocompatibility and non-thrombogenicity with a controlled drug release system. A new DES composed of biocompatible polymers coated with antithrombogenic diamond-like carbon (DLC) coating was proposed. In this study, the drug release profile of the newly proposed drug eluting system was thoroughly investigated. Three polymers were selected as base drug-reservoir materials: hydrophilic 2-methacryloyloxyethyl phosphorylcholine (MPC), hydrophobic poly (ethylene-co-vinyl acetate) (EVA) and less hydrophobic polyurethane (PU). The three polymers are currently used or studied for biomedical materials, while MPC and DLC were already confirmed as excellent biocompatible materials with antithrombogenicity. After coating the lattice-like patterned DLC on both polymers containing drug, samples were soaked in 2 ml of medium of phosphate-buffered saline with 10% ethanol. The drug release rate was measured by a spectrophotometer. The percentile cover area of patterned DLC on polymers was varied from 0% (without DLC) to 100% (fully covered). The sample without DLC coating presented an initial burst of the drug release from the polymer matrix, whereas the DLC-coated samples inhibited the initial burst release from polymers within the first five days of the experiments. It was found that the drug eluting profiles could be effectively controlled by changing the cover area of micro-patterned DLC coatings on polymers, which may be applicable to the next-generation DES system that eventually prevents late thrombosis.     

Cardiac malignant pheochromocytoma with bone metastases

A patient with malignant cardiac pheochromocytoma with bone metastases is described. The primary tumor was located between the pulmonary trunk and the left atrium, while metastatic lesions were found in the iliac bones. Treatments with antihypertensive agents, alpha-methylparatyrosine, and combination chemotherapy with cyclophosphamide, vincristine, and dacarbazine partially improved the patient's symptoms, catecholamine levels, and the metastatic lesion of the iliac bones. However, the primary tumor in the heart progressively increased in size and the patient died of disseminated intravascular coagulation and other various complications about 4 years after the diagnosis of the disease.     

粉末技术的新发展

定量解析在粉末技术中是不可缺少的。对孤立相性质的研究及对工艺过程的模拟可帮助系统性的实验研究。使用定量方法解决实际应用问题会得到无可比拟的研究成果。     

High-input-power saturation properties of apolarization-insensitive semiconductor Mach-Zehnder interferometer gateswitch for WDM applications

We propose that a polarization-insensitive Mach-Zehnder interferometer (MZI) switch is useful for optical gate elements, especially if multiwavelength signals are input. This device has high-input-power saturation properties, which shows that both the operating voltage and the extinction ratio do not change when the optical input power reaches at least +18 dBm. A high extinction ratio of 30 dB was achieved in the wide-wavelength range of 20 nm. Moreover, the extinction ratio can be improved by up to 45 dB by using a cascaded configuration to decrease crosstalk. These results indicate the MZI gate switch is well suited to wavelength-division multiplexing (WDM) network components