Effects of bovine serum albumin on the corrosion behaviour of AISI 316L, Co–28Cr–6Mo, and Ti–6Al–4V alloys in phosphate buffered saline solutions

The corrosion behaviour of AISI 316L, wrought Co–28Cr–6Mo and Ti–6Al–4V was studied in aerated solutions of phosphate buffered saline (PBS) at various concentrations of bovine serum albumin (BSA) at 37 °C. Open circuit potential, potentiodynamic polarization, linear polarization resistance (LPR) and electrochemical impedance spectroscopy (EIS) experiments along with X-ray photoelectron spectroscopy (XPS) on Co–28Cr–6Mo oxide layer were conducted to study the interaction of BSA and passive layers and to measure the corrosion rates. Ti–6Al–4V alloy had the lowest corrosion rate and the highest breakdown potential. It was shown that BSA has enhanced the alloy passive film stability at higher concentrations.     

The effect of post-treatments on the powder morphology of titanium dioxide (TiO2) powders synthesized for cold spray

In this study, a novel synthesis method of TiO₂ powders that can be cold sprayed is presented. The synthesis technique is a simple hydrolysis method of titanyl sulfate (TiOSO₄) in distilled water with a small addition of inorganic salt. At a relatively low hydrolysis temperature, pure anatase TiO₂ can be obtained and post-synthesis treatments (annealing or hydrothermal treatment) do not alter this phase structure. The powder is agglomerated with fine nano primary particles, with different post-synthesis treatments leading to different TiO₂ nanostructures. Annealing causes a significant growth of primary particles with the existence of internal pores within a particle. On the other hand, hydrothermal treatment produces a unique oriented agglomeration structure where the primary particles are agglomerated in one single crystal axes. It is believed that the synergistic effect of inorganic ion adsorption and post-treatments results in the observed nanostructures. After cold spraying, it is revealed that these TiO₂ powders could be deposited via supersonic solid phase deposition (cold spray).     

Game theory methodology for optimizing retailers’ pricing and shelf-space allocation decisions on competing substitutable products

This paper examines the influence of competition among supply chain partners on product demand. A power law demand function that depends on product pricing and shelf-space allocation (SSA) is used. The exponents in the power law are given by the elasticities of demand. In order to achieve the optimal pricing and SSA strategies in the presence of competition, game-theory-based methodologies—Cournot and Stackelberg games—are employed. For each type of game, a Nash equilibrium is achieved by optimizing the profit as a function of demand and price. A case study is presented to demonstrate the potential of this methodology. The results of this study indicate (1) how to achieve optimal pricing and SSA strategies, (2) how manufacturers can influence demand for a product, (3) that both prices and profits decrease using the Stackelberg game as compared with the Cournot game, and (4) that coordination beyond simple knowledge of price would be beneficial for improving overall profits.     

A Study on the Effect of Air on the Dynamic Motion of a MEMS Device and Its Shape Optimization

The authors propose a new design concept for controlling the deflection of a micro-membrane with the aid of its thickness distribution for realizing a prescribed design in the MEMS. As an example, the authors treat a micro air pump that comprises a micro-membrane. The membrane is actuated by an electrostatic force. The membrane deflects and thus the deflection is influenced by the air pressure and the electrostatic field. This is a highly complicated system. To find out a proper thickness distribution, the authors use the genetic algorithm that is appropriate to reduce the searching space of solution.     

Airborne endotoxin concentrations in indoor and outdoor particulate matter and their predictors in an urban city

Endotoxins are an important biological component of particulate matter and have been associated with adverse effects on human health. There have been some recent studies on airborne endotoxin concentrations. We collected fine (PM_2.5) and coarse (PM_10‐2.5) particulate matter twice on weekdays and weekends each for 48 hour, inside and outside 55 homes in an urban city in Japan. Endotoxin concentrations in both fractions were measured using the kinetic Limulus Amebocyte Lysate assay. The relationships between endotoxin concentrations and household characteristics were evaluated for each fraction. Both indoor and outdoor endotoxin concentrations were higher in PM_2.5 than in PM_10‐2.5. In both PM_2.5 and PM_10‐2.5, indoor endotoxin concentrations were higher than outdoor concentrations, and the indoor endotoxin concentrations significantly correlated with outdoor concentrations in each fraction (R²=0.458 and 0.198, respectively). Indoor endotoxin concentrations in PM_2.5 were significantly higher in homes with tatami or carpet flooring and in homes with pets, and lower in homes that used air purifiers. Indoor endotoxin concentrations in PM_10‐2.5 were significantly higher in homes with two or more children and homes with tatami or carpet flooring. These results showed that the indoor endotoxin concentrations were associated with the household characteristics in addition to outdoor endotoxin concentrations.     

Computed tomography reconstruction from two transmission measurements for iodine-marked cancer detection

The authors invented the transXend detector, which measures X-rays as electric currents, and then gives the energy distribution of the X-rays after an unfolding process. In a previous paper, it was shown that the material thickness distributions can be estimated with the transXend detector by using reference points plotted from the electric current ratios, such as the I ₂/I ₁ ? I ₃/I ₁ graph, where I_i denotes the electric current measured by the i-th segment of the transXend detector. In this paper, the tomographic images of iodine, aluminum, and the acrylic those surround the other two materials are reconstructed from their material thickness distributions, which are estimated from two X-ray incidence directions. The X-ray event ratios are also used to estimate the material thickness distributions.     

ANALYSIS ON THE SPINNING FORCES IN FLEXIBLE SPINNING OF CONES

Flexible spinning is a new type of spinning process where spin-forming is performedwithout using a mandrel. Combining shearing and rolling processes, the calculation formulas of thespinning forces in flexible spinning of cones is presented. The effects of the main processing parame-ters, such as gripping force G applied to the blank by the inner roller, the feed rate of rollers f and theroundness radius of outer roller r_o, on the spinning forces are analyzed experimentally and theoreti-cally.     

Stress distribution of coated film with a range of coated film thickness and elastic properties under a single EHL operating condition

In recent years, the techniques improving sliding performances have progressed by using coated films possessing superior tribological properties, to reduce the failures of the mechanical elements. Those techniques are often used under severe conditions such as elastohydrodynamic lubrication (EHL). In this paper, numerical three-dimensional analysis of the maximum shear stress applied into the coated film and substrate under a single EHL operating condition was performed with a range of coated film thickness and elastic properties. The strength of coated film as one of those techniques was evaluated numerically, resulting in an optimum design of coated film. As a result, coated films with a larger value of thickness and a smaller modulus of elasticity than that of substrate are preferable.     

Development of incremental deep drawing process

This paper deals with development of an incremental deep drawing process. On a newly developed incremental deep drawing set-up, the aluminium sheets are formed; the forming is carried out by deep-drawing the blank as in the conventional method but incrementally. Fractures at the punch or die corner in the blank may or may not occur depending on the conditions; the process parameters involved are punch size, punch corner radius, increment in punch displacement, blank holding force or pressure, etc. It is thus shown that different shapes are formed by one set of common tools. It is thereby confirmed that incremental deep drawing is possible without using a particular tool set for a particular shape.     

Does Density Aggravate the COVID-19 Pandemic?

Abstract

Problem, research strategy, and findings: The impact of density on emerging highly contagious infectious diseases has rarely been studied. In theory, dense areas lead to more face-to-face interaction among residents, which makes them potential hotspots for the rapid spread of pandemics. On the other hand, dense areas may have better access to health care facilities and greater implementation of social distancing policies and practices. The current COVID-19 pandemic is a perfect case study to investigate these relationships. Our study uses structural equation modeling to account for both direct and indirect impacts of density on the COVID-19 infection and mortality rates for 913?U.S. metropolitan counties, controlling for key confounding factors. We find metropolitan population to be one of the most significant predictors of infection rates; larger metropolitan areas have higher infection and higher mortality rates. We also find that after controlling for metropolitan population, county density is not significantly related to the infection rate, possibly due to more adherence to social distancing guidelines. However, counties with higher densities have significantly lower virus-related mortality rates than do counties with lower densities, possibly due to superior health care systems.

Takeaway for practice: These findings suggest that connectivity matters more than density in the spread of the COVID-19 pandemic. Large metropolitan areas with a higher number of counties tightly linked together through economic, social, and commuting relationships are the most vulnerable to the pandemic outbreaks. They are more likely to exchange tourists and businesspeople within themselves and with other parts, thus increasing the risk of cross-border infections. Our study concludes with a key recommendation that planners continue to advocate dense development for a host of reasons, including lower death rates due to infectious diseases like COVID-19.