Dynamic in situ observation of automotive catalysts for emission control using X-ray absorption fine structure

Two main pivotal subjects of research in automotive catalysts were studied by modern X-ray absorption analysis techniques. One is oxygen storage/release behaviour, and the other is sintering inhibition of Pt particles. First, three types of CeO₂–ZrO₂ (Ce:Zr = 1:1 molar ratio) compounds with different oxygen storage/release capacities and different structural properties were prepared, and the valence change of Ce as a function of temperature during oxygen release/storage processes was investigated. The reduction of surface Ce mainly occurred in the range 100–170 °C, and the reduction of bulk Ce progressed at high temperatures of 170 °C and above. The Ce reduction behaviour depended not only on the homogeneity of the Ce and Zr for bulk reduction at high temperatures but also on the particle size of the CeO₂–ZrO₂ samples for surface reduction at low temperatures. Secondly, sintering inhibition of Pt in Pt/Al₂O₃, Pt/MgO and Pt/ceria-based catalysts after 800 °C ageing in air was studied. We found that the Pt–O–M (M = Mg, Ce) bond acted as an anchor and inhibited the sintering of Pt particles on MgO or ceria-based oxide. Especially, it was noteworthy that the Pt–O–Ce⁴⁺ bond on the ceria-based support breaks easily through the reduction of Ce (Ce⁴⁺ → Ce³⁺) during the usual stoichiometric and reducing conditions.     

Synthesis and Properties of Gemini-type Cationic Surfactants Containing Carbonate Linkages in the Linker Moiety Directed Toward Green and Sustainable Chemistry

Gemini-type cationic surfactants containing carbonate linkages as biodegradable and chemically recyclable segments, consisting of two long-chain alkyl groups, two quaternary ammonium groups and a linker moiety, were designed and synthesized as novel green and sustainable cationics with improved physicochemical and biological activities. The gemini-type cationics containing a carbonate linkage showed lower critical micelle concentration values compared to the corresponding single-type cationics. Also, the gemini-type cationics containing a carbonate linkage in the linker moiety showed strong antimicrobial activities. The biodegradability of the gemini-type cationics was significantly improved when a carbonate linkage was introduced into the linker moiety. The maximum biochemical oxygen demand-biodegradability of the gemini-type cationics containing a carbonate linkage in the linker moiety exceeded 70% after a 28-day incubation. Furthermore, the gemini-type cationics containing both a carbonate linkage and an n-dodecyl group showed a chemical recyclability using a lipase (E.C. 3.1.1.3).

Comparison of activities in selective catalytic reduction of NOx by C3H8 over Co/MFI, Fe/MFI, and H/MFI zeolite catalysts

The Co/MFI(SiO₂/Al₂O₃ = 30) were prepared by a precipitation method with NaOCl in alkali solutions exhibited high activities to N₂ at 250 °C for the selective catalytic reduction (SCR) of NO_x. These catalysts showed two UV–vis bands at 700 and 400 nm, indicating the presence of octahedral Co(III) as well as tetrahedral Co(II). The high SCR activity over such Co(III, II)/MFI(30) seems to come from Co(III)---O moieties. The Co(II)MFI(30) catalysts prepared from Co(II)Cl₂ exhibited low SCR activities due to the presence of tetrahedral Co(II) ions in MFI. Less CO formation occurred over Co/MFI catalysts. The Fe/MFI(30) catalyst exhibited high activity due to the presence of some Fe---O species in MFI but more amount of CO were produced during SCR. H/MFI(30) catalyst exhibited a good SCR activity. However, more amount of carbonaceous deposits were produced on it. The correlation between acid concentration and SCR activity was discussed over H/MFIs.     

Size Controlled Synthesis of Gold Nanoparticles by Porphyrin with Four Sulfur Atoms

Tetradentate thioacetyl porphyrin ligand (1) was synthesized to protect gold nanoparticles. 1-protected gold nanoparticles were characterized by UV-vis spectroscopy and XPS. Analysis by XPS showed that all of four thioacetyl groups of 1 were dissociated and bound to the surface of gold nanoparticles in thiolate form. The size of 1-protected gold nanoparticles (GN:1) was controlled by thioacetyl group/HAuCl₄ molar ratio and approached to 2 nm. Compared with a protecting ligand without porphyrin plane (2) or dodecanethiol, 1 can control the size of gold nanoparticles efficiently probably due to the tetradentate ligation effect.     

Genotoxicity of nano/microparticles in in vitro micronuclei, in vivo comet and mutation assay systems

Background

Recently, manufactured nano/microparticles such as fullerenes (C₆₀), carbon black (CB) and ceramic fiber are being widely used because of their desirable properties in industrial, medical and cosmetic fields. However, there are few data on these particles in mammalian mutagenesis and carcinogenesis. To examine genotoxic effects by C₆₀, CB and kaolin, an in vitro micronuclei (MN) test was conducted with human lung cancer cell line, A549 cells. In addition, DNA damage and mutations were analyzed by in vivo assay systems using male C57BL/6J or gpt delta transgenic mice which were intratracheally instilled with single or multiple doses of 0.2 mg per animal of particles.

Results

In in vitro genotoxic analysis, increased MN frequencies were observed in A549 cells treated with C₆₀, CB and kaolin in a dose-dependent manner. These three nano/microparticles also induced DNA damage in the lungs of C57BL/6J mice measured by comet assay. Moreover, single or multiple instillations of C₆₀ and kaolin, increased either or both of gpt and Spi^- mutant frequencies in the lungs of gpt delta transgenic mice. Mutation spectra analysis showed transversions were predominant, and more than 60% of the base substitutions occurred at G:C base pairs in the gpt genes. The G:C to C:G transversion was commonly increased by these particle instillations.

Conclusion

Manufactured nano/microparticles, CB, C₆₀ and kaolin, were shown to be genotoxic in in vitro and in vivo assay systems.     

Kinetic Study of the Prooxidant Effect of α-Tocopherol. Hydrogen Abstraction from Lipids by α-Tocopheroxyl Radical

A kinetic study of the prooxidant effect of α-tocopherol was performed. The rates of allylic hydrogen abstraction from various unsaturated fatty acid esters (ethyl stearate 1, ethyl oleate 2, ethyl linoleate 3, ethyl linolenate 4, and ethyl arachidonate 5) by α-tocopheroxyl radical in toluene were determined, using a double-mixing stopped-flow spectrophotometer. The second-order rate constants (k _p) obtained are <1 × 10⁻² M⁻¹ s⁻¹ for 1, 1.90 × 10⁻² M⁻¹ s⁻¹ for 2, 8.33 × 10⁻² M⁻¹ s⁻¹ for 3, 1.92 × 10⁻¹ M⁻¹ s⁻¹ for 4, and 2.43 × 10⁻¹ M⁻¹ s⁻¹ for 5 at 25.0 °C. Fatty acid esters 3, 4, and 5 contain two, four, and six –CH₂– hydrogen atoms activated by two π-electron systems (–C=C–CH₂–C=C–). On the other hand, fatty acid ester 2 has four –CH₂– hydrogen atoms activated by a single π-electron system (–CH₂–C=C–CH₂–). Thus, the rate constants, k _abstr/H, given on an available hydrogen basis are k _p/4 = 4.75 × 10⁻³ M⁻¹ s⁻¹ for 2, k _p/2 = 4.16 × 10⁻² M⁻¹ s⁻¹ for 3, k _p/4 = 4.79 × 10⁻² M⁻¹ s⁻¹ for 4, and k _p/6 = 4.05 × 10⁻² M⁻¹ s⁻¹ for 5. The k _abstr/H values obtained for 3, 4, and 5 are similar to each other, and are by about one order of magnitude higher than that for 2. From these results, it is suggested that the prooxidant effect of α-tocopherol in edible oils, fats, and low-density lipoproteins may be induced by the above hydrogen abstraction reaction.     

Origin of the Red Color of Satsuma Copper-Ruby Glass as Determined by EXAFS and Optical Absorption Spectroscopy

The origin of the ruby color of Satsuma glass, a famous copper-ruby glass produced in Japan in the mid-19th century, has been examined by electron microprobe analysis (EPMA), X-ray absorption fine structure (XAFS), and optical absorption spectroscopy analyses. Cu K XAFS analysis reveals that the major component of copper in the ruby glass consists of Cu(I) ions in the glass structure. This species is distinct from Cu₂O (cuprite), which we conclude is not responsible for the ruby color. Optical absorption spectra measured at 300 and 77 K clearly distinguishes the absorptions due to the colloidal particles of metallic copper and Cu₂O. It is concluded that the trace amount of copper in the ruby glass, which is below the detection limit of the EPMA and XAFS techniques, exists as metallic copper particles of nanometer size and is responsible for the ruby-red appearance of the Satsuma glass.     

Adaptive interpolation scheme for NURBS curves with the integration of machining dynamics

This paper develops a comprehensive interpolation scheme for non-uniform rational B-spline (NURBS) curves, which does not only simultaneously meet the requirements of both constant feedrate and chord accuracy, but also real-time integrates machining dynamics in the interpolation stage. Although the existing work in this regard has realized the importance to simultaneously consider chord error and machining dynamics, none has really incorporated these in one complete interpolation scheme. In this paper, machining dynamics is considered for three aspects: sharp corners or feedrate sensitive corners on the curves, components with high frequencies or frequencies matching machine natural ones and high jerks. A look-ahead module was developed for detecting and adaptively adjusting the feedrate at the sharp corners. By Fast Fourier Transform (FFT) analysis with a moving window in the interpolation stage identified were some special frequency components such as those containing high frequencies or with frequencies matching machine natural ones. Then, the notch filtering or time spacing method was used to eliminate these components. To more completely reduce feedrate and acceleration fluctuations, the jerk-limited algorithm was also developed. Finally, the interpolated feedrate was further smoothened with B-spline fitting method and the NURBS curves were re-interpolated with the smoothened feedrate. During the interpolation, the chord error was repeatedly checked and confined in the prescribed tolerance. Two NURBS curves were used as examples to test the feasibility of the developed interpolation scheme.     

A study on the optimal fabrication method for micro-scale gyroscopes using a hybrid process consisting of electric discharge machining,chemical etching or micro-mechanical milling

For productive manufacturing of an accurate small-scale wine-glass gyroscope, a hybrid fabrication process consisting of either electric discharge machining, chemical etching, or micro-mechanical milling have been proposed. A comparison of silicon cavity fabrication processes has been conducted in terms of productivity, quality and geometrical accuracy, aiming at the use of the cavity as a mold for creating a thin wall diamond hemisphere, which is the main component of a wine-glass gyroscope. The results have shown that the EDM process, combined with chemical etching, can yield the highest productivity but with limited shape accuracy. The use of mechanical micro-milling, while less productive than EDM and etching, produces a superior quality and geometric accuracy.