Investigations on welding residual stresses in penetration nozzles by means of 3D thermal elastic plastic FEM and experiment

Recent discoveries of stress corrosion cracking (SCC) in weldments including penetration nozzles at pressurized water reactors (PWRs) and boiling water reactors (BWRs) have raised concerns about safety and integrity of plant components. It is well known that welding residual stress is an important factor resulting in SCC in weldments. In the present work, both experimental method and numerical simulation technology are used to investigate the characteristics of welding residual stress distribution in penetration nozzles welded by multi-pass J-groove joint. An experimental mock-up is fabricated to measure welding residual stress at first. In the experiment, each weld pass is performed using a semi-circle balanced welding procedure. Then, a corresponding finite element models with considering moving heat source, deposition sequence, inter-pass temperature, temperature-dependent thermal and mechanical properties, strain hardening and annealing effect is developed to simulate welding temperature and residual stress fields. The simulation results predicted by the 3D model are generally in good agreement with the measurements. Meanwhile, to clarify the influence of deposition sequence on the welding residual stress, the welding residual stress field in the same geometrical model induced by a continuous welding procedure is also calculated. Finally, the influence of a joint oblique angle on welding residual stress is investigated numerically. The numerical results suggest that both deposition sequence and oblique angles have effect on welding residual stress distribution.     

Artificial retina chips for image processing

Artificial retina chips which can simultaneously sense and process real world images are described. The comparison between artificial retinal systems and conventional image processing systems is described. Variable sensitivity photodetection, which is an essential technology for the artificial retina chips, is introduced in detail. The concept, structure, fundamental performance, operating principle, and processing functions for the fabricated artificial retinal chips are described. Applications including interactive games by gesture-input are also introduced. This work was presented, in part, at the International Symposium on Artificial Life and Robotics, Oita, Japan, February 18–20, 1996.     

Analgesic Effect of Tranilast in an Animal Model of Neuropathic Pain and Its Role in the Regulation of Tetrahydrobiopterin Synthesis

Trigeminal neuralgia is unilateral, lancinating, episodic pain that can be provoked by routine activities. Anticonvulsants, such as carbamazepine, are the drugs of choice; however, these possess side-effects. Microvascular decompression is the most effective surgical technique with a higher success rate, although occasionally causes adverse effects. The potential treatment for this type of pain remains unmet. Increased tetrahydrobiopterin (BH4) levels have been reported in association with axonal injury. This study aimed to evaluate the effect of tranilast on relieving neuropathic pain in animal models and analyze the changes in BH4 synthesis. Neuropathic pain was induced via infraorbital nerve constriction. Tranilast, carbamazepine, or saline was injected intraperitoneally to assess the rat’s post-intervention pain response. In the von Frey’s test, the tranilast and carbamazepine groups showed significant changes in the head withdrawal threshold in the ipsilateral whisker pad area. The motor coordination test showed no changes in the tranilast group, whereas the carbamazepine group showed decreased performance, indicating impaired motor coordination. Trigeminal ganglion tissues were used for the PCR array analysis of genes that regulate the BH4 pathway. Downregulation of the sepiapterin reductase (Spr) and aldoketo reductase (Akr) genes after tranilast injection was observed compared to the pain model. These findings suggest that tranilast effectively treats neuropathic pain.     

Subharmonic synchronous and hybrid mode-locking of a monolithic DBR laser operating at millimeter-wave frequencies

A detailed comparison of subharmonic synchronous and subharmonic hybrid mode-locking of a monolithic distributed Bragg reflector (DBR) laser operating at 33 GHz is presented. Optical injection at the 20th subharmonic frequency (1.65 GHz) has produced a locking range of 10 MHz with negligible amplitude modulation. In comparison, electrical injection at the 4th subharmonic frequency (5.83 GHz) has shown higher levels of amplitude modulation and a narrower locking range (4 MHz). While subharmonic hybrid mode-locking remains a simple and cost effective solution for the generation of low timing jitter high-repetition rate optical pulse trains, subharmonic synchronous mode-locking shows superior performance with regard to reduced amplitude modulation and larger locking range.     

A three-dimensional microfluidic tumor cell migration assay to screen the effect of anti-migratory drugs and interstitial flow

Most anti-cancer drug screening assays are currently performed in two dimensions, on flat, rigid surfaces. However, there are increasing indications that three-dimensional (3D) platforms provide a more realistic setting to investigate accurate morphology, growth, and sensitivity of tumor cells to chemical factors. Moreover, interstitial flow plays a pivotal role in tumor growth. Here, we present a microfluidic 3D platform to investigate behaviors of tumor cells in flow conditions with anti-migratory compounds. Our results show that interstitial flow and its direction have significant impact on migration and growth of hepatocellular carcinoma cell lines such as HepG2 and HLE. In particular, HepG2/HLE cells tend to migrate against interstitial flow, and their growth increases in interstitial flow conditions regardless of the flow direction. Furthermore, this migratory activity of HepG2 cells is enhanced when they are co-cultured with human umbilical vein endothelial cells. We also found that migration activity of HepG2 cells attenuates under hypoxic conditions. In addition, the effect of Artemisinin, an anti-migratory compound, on HepG2 cells was quantitatively analyzed. The microfluidic 3D platform described here is useful to investigate more accurately the effect of anti-migratory drugs on tumor cells and the critical influence of interstitial flow than 2D culture models.     

Space–time SUPG finite element computation of shallow-water flows with moving shorelines

We show that combination of the Deforming-Spatial-Domain/Stabilized Space–Time and the Streamline-Upwind/Petrov–Galerkin formulations can be used quite effectively for computation of shallow-water flows with moving shorelines. The combined formulation is supplemented with a stabilization parameter that was originally introduced for compressible flows, a compressible-flow shock-capturing parameter adapted for shallow-water flows, and remeshing based on using a background mesh. We present a number of test computations and provide comparisons to theoretical results, experimental data and results computed with nonmoving meshes.     

Vacuum seal for a rectangular flange

A new vacuum seal for a rectangular flange used in r.f. equipments, was developed. The vacuum seal consists of a recess with a flat surface, machined into a rectangular flange, a rectangular metal gasket with a raised projection on one face, and a mating flange with a recess and raised projection. No leak greater than 1 × 10⁻¹⁰ Pa m³/s was found in leak tests, before and after baking cycles (100 °C, 12 h).     

Thermal behavior,morphology, and mechanical properties of blend strands consisting of poly(ethylene terephthalate) and semiaromatic liquid crystalline polymer

Polymer blends of poly(ethylene terephthalate) (PET) and a liquid crystalline polymer (LCP) [random copolymers of the poly(ethylene telephthalate) and poly (hydroxybenzoic acid)] were prepared by using a twin-screw extruder. Strands were extruded from a capillary die. Extruded stands were stretched in an oven at 80°C. DSC and SEM were employed to investigate the structural properties of the strands. Mechanical properties of the strands were evaluated by a sonic propagation method. DSC investigation suggested that LCP phases may act as a nucleating agent of PET and the orientation-induced crystallization of PET was accelerated by the presence of LCP. An SEM micrograph shows that the LCP phases formed finely spherical domains with a diameter of 0.1–1.0 μm in the PET matrix and large parts of LCP spherical droplets were deformed to fibrils. In the case of unstretched strands, sonic moduli increased linearly with increasing LCP content, because PET was reinforced by LCP fibrils as in the case of glass fiber-reinforced PET. The degree of crys-tallization of PET also increased with increasing LCP contents. In the case of stretched strands, sonic moduli increased with an increasing stretching ratio due to the orientation-induced crystallization of PET. A larger increasing of the sonic modulus was shown in LCP-containing strands in the regions of a low stretching ratio (1–5), since the orientation-induced crystallization of PET was accelerated by the presence of LCP phases. © 1996 John Wiley & Sons. Inc.