Control of molecular weight distribution of isotactic polypropylene obtained by a MgCl2-supported TiCl4 catalyst

It is of great importance in propene polymerization to control molecular weight and molecular weight distribution as well as isotacticity. Propene polymerization was carried out with an isospecific MgCl₂/TiCl₄-Cp₂TiMe₂ catalyst in the presence of various kinds of external Lewis bases. It was found that the molecular weight distribution of the isotactic polymer could be controlled while retaining high activity, high isospecificity and high molecular weight only by changing the kind and/or amount of the Lewis bases. © 1997 Elsevier Science Ltd.     

Structural characterization of 1,2-polybutadiene by 13C-n.m.r. spectroscopy: 2. Sequence distribution of 1,2-unit in hydrogenated polybutadienes

The configurational sequences of 1,2-unit in a series of hydrogenated syndiotactic 1,2-polybutadienes were determined in relation to the sequence distribution of 1,2- and 1,4-units on the basis of the ¹³C-n.m.r. signal assignment of the methyl carbons. The observed triad distributions of 1,2- and 1,4-units and configurational distributions of the 1,2-unit are in good agreement with the calculated distributions from transition probabilities. The number average sequence lengths of the 1,2-unit and the 1,2-unit in the racemic addition are 5.7 to 8.0 and 4.1 to 5.4, respectively. From the extrapolation of the plot of the number average sequence length against the crystallinity of the starting 1,2-polybutadienes, the minimum sequence length for crystallization is estimated to be 3.7 for the 1,2-unit in the racemic addition.     

Adaptive interpolation scheme for NURBS curves with the integration of machining dynamics

This paper develops a comprehensive interpolation scheme for non-uniform rational B-spline (NURBS) curves, which does not only simultaneously meet the requirements of both constant feedrate and chord accuracy, but also real-time integrates machining dynamics in the interpolation stage. Although the existing work in this regard has realized the importance to simultaneously consider chord error and machining dynamics, none has really incorporated these in one complete interpolation scheme. In this paper, machining dynamics is considered for three aspects: sharp corners or feedrate sensitive corners on the curves, components with high frequencies or frequencies matching machine natural ones and high jerks. A look-ahead module was developed for detecting and adaptively adjusting the feedrate at the sharp corners. By Fast Fourier Transform (FFT) analysis with a moving window in the interpolation stage identified were some special frequency components such as those containing high frequencies or with frequencies matching machine natural ones. Then, the notch filtering or time spacing method was used to eliminate these components. To more completely reduce feedrate and acceleration fluctuations, the jerk-limited algorithm was also developed. Finally, the interpolated feedrate was further smoothened with B-spline fitting method and the NURBS curves were re-interpolated with the smoothened feedrate. During the interpolation, the chord error was repeatedly checked and confined in the prescribed tolerance. Two NURBS curves were used as examples to test the feasibility of the developed interpolation scheme.     

Applying MHD technology to the continuous casting of steel slab

The application of magnetohydrodynamics (MHD) in the continuous casting process started with the electromagnetic stirring of the stand pool with a traveling magnetic field. It has now advanced to the electromagnetic stirring of molten steel in the mold and the control of molten steel flow by an in-mold direct current magnetic field brake. These applied MHD techniques are designed to further improve the continuous casting process capability. They improve the surface quality of cast steel by homogenizing the meniscus temperature, stabilizing initial solidification, and cleaning the surface layer. They also improve the internal quality of cast steel by preventing inclusions from penetrating deep into the pool and promoting the flotation of argon bubbles. Applied MHD technology is still advancing in scope and methods in addition to the improvement of conventional continuously cast slab qualities. The continuous casting of bimetallic slab by suppressing mixing in the pool is one example of this progress.     

Corrosion protection of NdFeB magnets by phosphating with tungstate incorporation

In this investigation the effect of surface treatments on the corrosion resistance of a commercial NdFeB sintered magnet has been investigated. A solution of 10 g L^− 1 NaH₂PO₄, acidified to pH 3.8 has been used for phosphating this magnet. The corrosion resistance of the phosphated magnet was investigated in a 0.10 mol L^− 1 Na₂SO₄ solution by electrochemical impedance spectroscopy and cyclic voltammetry with rotating disc electrode. The obtained results reveal that the resistance decreases with exposure time due to the development of pores and/or defects in the conversion coating exposing the substrate to corrosive attack. The effect of tungstate incorporation into the phosphate conversion coating resulting from a phosphating treatment prior to immersion in the tungstate solution was evaluated. The proposed treatment consists of re-immersing the phosphated samples in a 0.1 mol L^− 1 Na₂WO₄ solution during 72 h at the open circuit potential (OCP). Under these conditions, the corrosion resistance of the magnet was improved and this was attributed to the formation of a protective layer due to the adsorption of tungstate anions at the metallic substrate exposed in the coating, decreasing metal dissolution.     

Quantitative structural analysis of twin boundary in alpha-Zn7Sb2O12 using HAADF STEM method

The structure and composition of the 1/4{110} twin boundary in alpha-Zn7Sb2O12 have been determined by using quantitative high-angle annular dark field scanning transmission electron microscopy (HAADF STEM) analysis. The noise in the experimental HAADF STEM images is reduced by using the maximum entropy method and average processing, and the parameters used in dynamical simulations are experimentally determined. From the analysis, it has been found that octahedral sites in the twin boundary slightly shift parallel to the [110] direction, and a reduction of the Sb concentration at the octahedral sites on the plane adjacent to the twin boundary was detected. The reduction was measured from three regions in the same twin boundary, and the Sb concentrations were 4 +/- 3, 8 +/- 3 and 19 +/-2 at% from 33 at%.     

Patient with unusual Hutchinson-Gilford syndrome (progeria)

A patient with unusual Hutchinson-Gilford syndrome (progeria) is reported. This 7-year-old boy had all the characteristics of progeria, except for coxa valga and the "horse-riding" stance. A previous cerebral infarction was detected in the right putamen on cranial magnetic resonance imaging. During treadmill exercise test electrocardiography, ST depression suggested the existence of arteriosclerotic lesions. Skin fibroblast culture exhibited 76% DNA-repair capacity compared to normal. He has not manifested endocrinologic abnormalities. From these findings it is concluded that this patient has an incomplete case of Hutchinson-Gilford syndrome and that a correlation may exist between the clinical features and the degree of DNA-repair capacity.     

A new scaling algorithm for the maximum mean cut problem

We present a new scaling algorithm for the maximum mean cut problem. The mean of a cut is defined by the cut capacity divided by the number of arcs crossing the cut. The algorithm uses an approximate binary search and solves the circulation feasibility problem with relaxed capacity bounds. The maximum mean cut problem has recently been studied as a dual analogue of the minimum mean cycle problem in the framework of the minimum cost flow problem by Ervolina and McCormick. A networkN=(G, lower, upper) with lower and upper arc capacities is said to be -feasible ifN has a feasible circulation when we relax the capacity bounds by ; that is, we use (lower(a)- , upper(a)+) bounds instead of (lower(a), upper(a)) bounds for each arca A. During an approximate binary search we maintain two bounds,LB andUB, such thatN is LB-infeasible andUB-feasible, and we reduce the interval size (LB, UB) by at least one-third at each iteration. For a graph withn vertices, m arcs, and integer capacities bounded byU, the running time of this algorithm is O(mn log(nU). This time bound is better than the time achieved by McCormick and Ervolina under thesimilarity condition (that is,U=O(n^o(1))). Our algorithm can be naturally used for the circulation feasibility problem, and thus provides a new scaling algorithm for the minimum cut problem.Research supported by a grant-in-aid of the Ministry of Education, Science and Culture of Japan.     

Clinical application of single-shot echo-planar diffusion-weighted imaging with compressed SENSE in prostate MRI at 3T: preliminary experience

Magnetic Resonance Materials in Physics, Biology and Medicine - Image quality (IQ) of diffusion-weighted imaging (DWI) with single-shot echo-planar imaging (ssEPI) suffers from low signal-to-noise...     

Relationship of occupation to blood pressure among middle-aged Japanese men--the significance of the differences in body mass index and alcohol consumption

To clarify how and why blood pressure differs between occupations, the proportions of hypertensives, and the measures of blood pressure, body mass index (BMI) and alcohol consumption among the individuals not taking antihypertensive drugs were compared between the eight occupational categories using the data from a health check-up for 589 middle-aged Japanese males, mostly randomly selected from five areas in Japan. After adjusting for age, the relationships of occupation to the proportion of hypertensives and the mean systolic and diastolic blood pressure substantially differed among the five areas. However, after further adjustment for residence, these blood pressure levels (the proportion of hypertensives, and the mean systolic and diastolic blood pressure) were found to be higher for the "Personnel in transport and communications", the "Clerical personnel", the "Managerial and civil personnel" and the "Professional and technical personnel", whereas these values were consistently lowest in the "Service personnel". Age and residence-adjusted mean BMI was also higher for the four occupational categories with the increased blood pressure levels. According to a weighted multiple regression analysis across the eight occupations, the age and residence-adjusted mean BMI was a significant predictor of the age and residence-adjusted mean systolic and diastolic blood pressure (p = 0.068 and 0.018, respectively). These results suggest that the occupation-related changes in BMI may largely contribute to the occupation-related changes in blood pressure.