Development of cable fault location method using fiber optic distributed temperature sensor

When ground-fault problems occur on a cable line, immediate fault location and restoration are required. Therefore, various new methods to locate the fault point instantaneously have been investigated to replace such conventional methods as the Murray loop method and the pulse radar method [1]. These methods require a long time to locate the fault point. One possible fault location method is to sense the temperature rise following a ground fault using a fiber optic distributed temperature sensor. Application of this method was found feasible through sensing the temperature rise at a ground-fault test using a thermocouple as a temperature sensor with test cables [4]. A power/optical composite cable was prepared experimentally and after verifying its thermal mechanical performance, the temperature rise at an incidence of a fault was determined and the anticipated performance was demonstrated in a ground-fault test. This article describes the outline of the test.     

Thiamine pyrophosphatase activity in the Golgi apparatus of calcitonin-treated osteoclasts.

The thiamine pyrophosphatase (TPPase) activity described by Novikoff and Goldfisher was examined in osteoclasts affected by calcitonin in order to elucidate whether the morphological and functional changes of the osteoclasts have an influence over the secretion function of their Golgi apparatus. The Golgi apparatus of osteoclasts of which the ruffled border had disappeared and bone resorption discontinued as the result of treatment with calcitonin showed a slight TPPase activity. The reaction products of the enzyme in these inactive osteoclasts were distinctly fewer than that of control osteoclasts, which were not affected by calcitonin. From these results, it is suggested that there may be a connection between the morphological and functional changes of osteoclasts and the secretion function of the Golgi apparatus.     

Antioxidant activity of anacardic acids

Anacardic acids, 6-pentadec(en)ylsalicylic acids isolated from the cashew Anacardium occidentale L. (Anacardiaceae) nut and apple, were found to possess preventive antioxidant activity while salicylic acid did not show this activity. These anacardic acids prevent generation of superoxide radicals by inhibiting xanthine oxidase (EC 1.1.3.22, Grade IV) without radical-scavenging activity. Notably, the inhibition kinetics of anacardic acids do not follow hyperbolic dependence of enzyme inhibition on inhibitor contents (Michaelis–Menten equation) but follow the Hill equation instead. Anacardic acid (C_15:1) inhibited the soybean lipoxygenase-1 (EC 1.13.11.12, Type 1) catalyzed oxidation of linoleic acid with an IC₅₀ of 6.8 μM. The inhibition is a slow and reversible reaction without residual enzyme activity. The inhibition kinetics indicate that anacardic acid (C_15:1) is a competitive inhibitor and the inhibition constant, K_I, was 2.8 μM. Anacardic acids act as antioxidants in a variety ways, including inhibition of various prooxidant enzymes involved in the production of the reactive oxygen species and chelate divalent metal ions such as Fe²⁺ or Cu²⁺, but do not quench reactive oxygen species. The C₁₅-alkenyl side chain is largely associated with the activity.     

Effects of weak shear on hyperswollen lyotropic smectic liquid crystals

We have developed a Zimm-type viscometer specially designed for the simultaneous measurements of the structure factor and the viscosity of hyperswollen lyotropic liquid crystals under a very weak shear. We have investigated the shear effects on the layer undulation fluctuation in the lamellar structure and the transition from the anisotropic lamellar to the isotropic sponge phase. We have found a significant difference in the rheological properties between the lamellar and the sponge phase: The former exhibits non-Newtonian flow behavior, while the latter exhibits Newtonian behavior.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

Application of boundary element method to 3-D problems of coupled thermoelasticity

This paper deals with a new boundary element method for analysis of the quasistatic problems in coupled thermoelasticity. Through some mathematical manipulation of the Navier equation in elasticity, the heat conduction equation is transformed into a simpler form, similar to the uncoupled-type equation with the modified thermal conductivity which shows the coupling effects. This procedure enables us to treat the coupled thermoelastic problems as an uncoupled one, A few examples are computed by the proposed BEM, and the results obtained are compared with the analytical ones available in the literature, whereby the accuracy and versatility of the proposed method are demonstrated.     

Multichannel fiber ferrule for a stable laser-diode array module

We developed a multichannel fiber ferrule for a stable laser-diode array module. To apply YAG laser welding to parallel butt couple between the laser-diode and the single-mode fiber arrays, hermetically sealed and precisely aligned equi-interval fibers are required. We describe a V-grooved ceramic ferrule for embedding fibers. Fibers are fixed by soldering, using a flat ceramic lid and aligned with a 250 μm pitch. Our ferrule allowed a metallic, stem mounting laser-diode, to be fixed by YAG laser welding. All 30 samples tested have a leak rate of less than 1×10^-10 atm·cc/s. Optical coupling of fabricated modules was 9.7±0.2 dB and coupling loss change from 25°C to 115°C was within 0.5 dB     

Dielectric properties above the glass transition for a series of epoxide prepolymers

Dielectric properties above the glass transition have been investigated for a series of bisphenol-A type epoxide prepolymers (388 ≤ M?_w ≤ 2640). Dielectric measurements were performed over a frequency range of 50 Hz–1 MHz using a vertical parallel plate cell which was constructed in the laboratory. The dielectric α-relaxation for each prepolymer fits the empirical model of the Havriliak–Negami equation. The temperature dependence of the dielectric relaxation time τ is described by the Williams–Landel–Ferry (WLF) equation as well as that of the direct current conductivity σ, which can be measured using the same cell. The relationship between τ and σ, σ^· τ^m = const, is derived from experimental results. The exponent m, which depends on the molecular weight of the prepolymer, is considered to correspond to the ratio of the segmental mobility to ionic mobility. The dielectric loss ε″ can be used as an indicator of the direct current conduction in the temperatures where the ionic component in ε″ becomes much larger than the dipole one.     

A study of uncertain state estimation

In this paper, we present results of uncertain state estimation of systems that are monitored with limited accuracy. For these systems, the representation of state uncertainty as confidence intervals offers significant advantages over the more traditional approaches with probabilistic representation of noise. While the filtered-white-Gaussian noise model can be defined on grounds of mathematical convenience, its use is necessarily coupled with a hope that an estimator with good properties in idealised noise will still perform well in real noise. In this study we propose a more realistic approach of matching the noise representation to the extent of prior knowledge. Both interval and ellipsoidal representation of noise illustrate the principle of keeping the noise model simple while allowing for iterative refinement of the noise as we proceed. We evaluate one nonlinear and three linear state estimation technique both in terms of computational efficiency and the cardinality of the state uncertainty sets. The techniques are illustrated on a synthetic and a real-life system.     

Thermal Analysis of CNT-Based Nano-Composites by Element Free Galerkin Method

This paper deals with the thermal analysis of carbon nanotube (CNT) based composites by meshless element free Galerkin method. Cylindrical representative volume element (cylindrical RVE) has been chosen to evaluate the thermal properties of nano-composites using multi-domain and simplified approaches. The values of temperature have been calculated at different points and plotted against RVE length and RVE radius. A sensitivity analysis of RVE as well as CNT dimensions has been carried out in detail. The present computations show that the equivalent thermal conductivity is a function of CNT length, CNT radius, RVE length and RVE radius. Based on present numerical simulations, an approximate formula is proposed to calculate the equivalent thermal conductivity of nano-composites. The results obtained by simplified approach have been found in good agreement with those obtained by multi-domain approach.     

Effect of 8 MeV electron irradiation on electrical properties of CuInSe2 thin films

Radiation damages due to 8 MeV electron irradiation in electrical properties of CuInSe₂ thin films have been investigated. The n-type CuInSe₂ films in which the carrier concentration was about 3×10¹⁶ cm⁻³, were epitaxially grown on a GaAs(0 0 1) substrate by RF diode sputtering. No significant change in the electrical properties was observed under the electron fluence <3×10¹⁶ e cm⁻². As the electron fluence exceeded 10¹⁷ e cm⁻², both the carrier concentration and Hall mobility slightly decreased. The carrier removal rate was estimated to be about 0.8 cm⁻¹, which is slightly lower than that of III–V compound materials.