Autoxidation of ethyl eicosapentaenoate and docosahexaenoate

The extent of oxidation of ethyl esters of eicosapentaenoic (EPA) and docosahexaenoic acids (DHA) was compared quantitatively with that of ethyl linoleate (Lo) and ethyl linolenate (Ln) by oxygen uptake and formation of conjugated diene, hydroperoxide and secondary oxidation products. EPA and DHA esters were oxidized rapidly even at 5 C in the dark after an induction period of 3–4 days, while the induction periods of Ln and Lo esters were 20 days and more than 60 days, respectively. Oxygen uptake of EPA and DHA esters after the induction period was 5.2 and 8.5 times faster than that of ethyl Ln, respectively. Hydroperoxides of EPA and DHA esters are much less stable than those of ethyl Lo. The peroxide value is not necessarily a good indication of oxidation in these polyenoic acids because a considerable amount of secondary products is formed at the early stage of oxidation. Polymers were found to be major secondary products in these polyenoic esters.     

Adaptive interpolation scheme for NURBS curves with the integration of machining dynamics

This paper develops a comprehensive interpolation scheme for non-uniform rational B-spline (NURBS) curves, which does not only simultaneously meet the requirements of both constant feedrate and chord accuracy, but also real-time integrates machining dynamics in the interpolation stage. Although the existing work in this regard has realized the importance to simultaneously consider chord error and machining dynamics, none has really incorporated these in one complete interpolation scheme. In this paper, machining dynamics is considered for three aspects: sharp corners or feedrate sensitive corners on the curves, components with high frequencies or frequencies matching machine natural ones and high jerks. A look-ahead module was developed for detecting and adaptively adjusting the feedrate at the sharp corners. By Fast Fourier Transform (FFT) analysis with a moving window in the interpolation stage identified were some special frequency components such as those containing high frequencies or with frequencies matching machine natural ones. Then, the notch filtering or time spacing method was used to eliminate these components. To more completely reduce feedrate and acceleration fluctuations, the jerk-limited algorithm was also developed. Finally, the interpolated feedrate was further smoothened with B-spline fitting method and the NURBS curves were re-interpolated with the smoothened feedrate. During the interpolation, the chord error was repeatedly checked and confined in the prescribed tolerance. Two NURBS curves were used as examples to test the feasibility of the developed interpolation scheme.     

Quantitative structural analysis of twin boundary in alpha-Zn7Sb2O12 using HAADF STEM method

The structure and composition of the 1/4{110} twin boundary in alpha-Zn7Sb2O12 have been determined by using quantitative high-angle annular dark field scanning transmission electron microscopy (HAADF STEM) analysis. The noise in the experimental HAADF STEM images is reduced by using the maximum entropy method and average processing, and the parameters used in dynamical simulations are experimentally determined. From the analysis, it has been found that octahedral sites in the twin boundary slightly shift parallel to the [110] direction, and a reduction of the Sb concentration at the octahedral sites on the plane adjacent to the twin boundary was detected. The reduction was measured from three regions in the same twin boundary, and the Sb concentrations were 4 +/- 3, 8 +/- 3 and 19 +/-2 at% from 33 at%.     

Unsupervised WSD by Finding the Predominant Sense Using Context as a Dynamic Thesaurus

We present and analyze an unsupervised method for Word Sense Disambiguation (WSD). Our work is based on the method presented by McCarthy et al. in 2004 for finding the predominant sense of each word in the entire corpus. Their maximization algorithm allows weighted terms (similar words) from a distributional thesaurus to accumulate a score for each ambiguous word sense, i.e., the sense with the highest score is chosen based on votes from a weighted list of terms related to the ambiguous word. This list is obtained using the distributional similarity method proposed by Lin Dekang to obtain a thesaurus. In the method of McCarthy et al., every occurrence of the ambiguous word uses the same thesaurus, regardless of the context where the ambiguous word occurs. Our method accounts for the context of a word when determining the sense of an ambiguous word by building the list of distributed similar words based on the syntactic context of the ambiguous word. We obtain a top precision of 77.54% of accuracy versus 67.10% of the original method tested on SemCor. We also analyze the effect of the number of weighted terms in the tasks of finding the Most Frecuent Sense (MFS) and WSD, and experiment with several corpora for building the Word Space Model.     

Automatic 3D model reconstruction of cutting tools from a single camera

Collision detection by machining simulation requires the 3D models of rotating cutters. However, the 3D models of a cutter and holder are not always available. In this paper, a new method is proposed to design an automatic vision-based 3D modeling system, which is able to quickly reconstruct the 3D model of a cutter and holder when they are installed onto the spindle. Only a single camera is mounted on the machine tool to capture the image of the rotating cutter and holder. By viewing the rotating cutter and holder as an object of surface of revolution, the contour of the imaged cutter and holder can be used to reconstruct the 3D model as a stack of circular cross-sections. Then the complete generating function of the cutter and holder can be recovered from the cross-sections. Finally, the 3D model of the cutter is built by rotating the generating function around the spindle axis. The effectiveness and accuracy of the proposed method are verified by experiments on-machine using 12 kinds of cutters and holders, which can satisfy the requirement of collision detection.     

An accurate adaptive NURBS curve interpolator with real-time flexible acceleration/deceleration control

Parametric interpolation has been widely used in CNC machining because of its advantages over the traditional linear or circular interpolation. Many researchers focused on this field and have made great progress in the specific one, NURBS curve interpolation. These works greatly improved the CNC machining with constant feedrate, confined chord error and limited acceleration/deceleration. However, during CNC machining process, mechanical shocks to machine tool caused by the undesired acceleration/deceleration profile will dramatically deteriorate the surface accuracy and quality of the machined parts. This is, in most occasions, very harmful to machine tools. In this paper, an accurate adaptive NURBS curve interpolator is proposed with consideration of acceleration–deceleration control. The proposed design effectively reduces the machining shocks by constraining the machine tool jerk dynamically. Meanwhile, the constant feedrate is maintained during most time of machining process, and thus high accuracy is achieved while the feedrate profile is greatly smoothed. In order to deal with the sudden change of the acceleration/deceleration around the corner with large curvature, a real-time flexible acceleration/deceleration control scheme is introduced to adjust the feedrate correspondingly. Case study has been taken to verify the feasibility and advantages of the proposed design.     

Challenge: Concept of system life and its application to robotics

Artifact systems created by humans interact with the surrounding natural world and have a large-scale influence on our human lives. The most creditable concept to this critical issue of scientific and technological development seems to be “System Life” that is an innovative competence to be embodied into any artifact system for creating harmony in the world of natural entities and artifact systems interacting with each other. System life is defined as a seamless system of sensing, processing, activating and expressing mechanisms governed by system life information. This paper introduces a design approach of robots possessing system life. First, this paper presents the concept of system life comparing it with the conventional design methodology of intelligent systems. Second, the paper introduces an intelligent control methodology using the cubic neural network that the author developed in order to cope with unpredicted failures. Finally, the paper presents various intelligent robots, a skiing robot, autonomous soccer robots, a game playing robot, as new concrete artifact systems designed using the system life concept.     

Negation-Limited Complexity of Parity and Inverters

In negation-limited complexity, one considers circuits with a limited number of NOT gates, being motivated by the gap in our understanding of monotone versus general circuit complexity, and hoping to better understand the power of NOT gates. We give improved lower bounds for the size (the number of AND/OR/NOT) of negation-limited circuits computing Parity and for the size of negation-limited inverters. An inverter is a circuit with inputs x ₁,…,x _n and outputs ¬ x ₁,…,¬ x _n . We show that: (a) for n=2 ^r ?1, circuits computing Parity with r?1 NOT gates have size at least 6n?log?₂(n+1)?O(1), and (b) for n=2 ^r ?1, inverters with r NOT gates have size at least 8n?log?₂(n+1)?O(1). We derive our bounds above by considering the minimum size of a circuit with at most r NOT gates that computes Parity for sorted inputs x ₁≥???≥x _n . For an arbitrary r, we completely determine the minimum size. It is 2n?r?2 for odd n and 2n?r?1 for even n for ?log?₂(n+1)??1≤r≤n/2, and it is ?3n/2??1 for r≥n/2. We also determine the minimum size of an inverter for sorted inputs with at most r NOT gates. It is 4n?3r for ?log?₂(n+1)?≤r≤n. In particular, the negation-limited inverter for sorted inputs due to Fischer, which is a core component in all the known constructions of negation-limited inverters, is shown to have the minimum possible size. Our fairly simple lower bound proofs use gate elimination arguments in a somewhat novel way.     

Colorimetric microdetermination of sulphites in foods by use of the modified rankine apparatus. IV.

Summary Detection and determination of traces of sulphites in foods was attempted by use of the modified Rankine apparatus and pararosaniline colorimetry. Replacement of alkaline titration reported previously by pararosaniline colorimetry lowered the absolute detection limit from 30 g (titration method) to 2 g. In view of clean analysis, in the color developing system, 0.1 N-sodium hydroxide was used in place of mercuric chloride solution commonly used as an absorbant of sulphites. In order to prevent oxidative decomposition of sulphites during operation, nitrogen gas was used as carrier instead of air. Dimedone and sodium azide were used for the elimination of aldehydes and nitrites, respecitvely, in the sample, which will disturb the color development of sulphites with pararosaniline-formaldehyde reagents. With this improved method, it was possible to determine the residual sulphites in frozen peeled shrimps, sugared beans and other foods with low sulphite contents accurately.

---

Colorimetrische Mikrobestimmung von Sulfiten in Lebensmitteln bei Anwendung der modifizierten IV. Rankine Apparatur

Zusammenfassung Geringe Sulfitmengen in Lebensmitteln (geschälte Garnelen, gezuckerte Bohnen) können colorimetrisch bestimmt werden. Die neuentwickelte Methode beruht auf einer Kombination von colorimetrischer Bestimmung mittels p-Rosanilin und der Bestimmungsmethode nach Rankine. Auf diese Weise lassen sich Gehalte von 2 g noch genau bestimmen. Bei der Farbentwicklung wurde das giftige Quecksilbertetrachlorid durch 0.1 n-NaOH ersetzt, anstelle von Luft Stickstoff als Trägergas verwendet und somit eine Oxydation des Sulfits während der Bestimmung vermieden. Da Nitrit und Aldehyde die Farbentwicklung stören, wurde ihr Einfluß durch Dimedon und Natriumazid ausgeschaltet.

---

---

Studies on the Analyses of Sulphites in Foods (IV)     

Development of Cutting Condition Monitoring System for ID-blade Saw Slicing Machine

1 Introduction There are two ways ,the multi-wire sawslicing method and the inner-diameter blade slicing method,re-cently used for cutting wafers froma single crystal ingot . Multi-wire sawbecomes more popular iningot slicingprocesses ,because it has an advantage for slicinglarge diameter or long siliconingot and has efficiency for massproduction.However ,this method is difficult to control the wire cutting the ingot along its crystal orientationandit is less correspond to the request of some …