Dip Coating of Water-Resistant PEDOT:PSS Films Based on Physical Crosslinking

Water-resistant poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films are valuable in biomedical applications; however, they typically require crosslinkers to stabilize the films, which can introduce undesired aggregation or phase separation reactions. Herein, a dipping-based process to prepare PEDOT:PSS films on nonplanar surfaces without crosslinker is developed. Sequential soaking of a dip-coated PEDOT:PSS film in ethanol and water imparts water resistance to the film. Microscopic and spectroscopic techniques are used to monitor the process and confirm that the ethanol soaking elutes the excess PSS from the film bulk, which stabilizes the film prior to the water-soaking process. The obtained films act as conductors and semiconductors on curved surfaces, including 3D-printed objects. A film deposited on a curved surface is successfully applied as the channel layer in a neuromorphic organic electrochemical transistor. This approach can enable integrated bioelectronic and neuromorphic applications that can be readily deployed for facile prototyping.     

Thraustochytrid as a potential source of carotenoids

Thraustochytrids, marine protists whose dominant genera are Thraustochytrium and Schizochytrium, belong to the kingdom Chromista and are known as an industrial source of DHA. We describe here that thraustochytrid strain KH105, isolated as a DHA producer, also accumulates significant levels of β-carotene and xanthophylls including canthaxanthin and astaxanthin. A4-d cultivation using a medium composed of 10% glucose and less than 0.3% of nitrogen sources in a half-concentration of seawater gave an astaxanthin production up to 6.1 mg/L, and canthaxanthin content reached more than 10 mg/L under conditions where a higher concentration of nitrogen sources (6%) was employed. It might be advantageous in mass production systems for these carotenoids to be extracted readily by simply suspending the cells with organic solvents such as acetone and chloroform. Analyses on the morphological and life history features of the KH105 strain revealed that it belongs to the genus Schizochytrium. This particular species of thraustochytrids is thus considered to be a promising source of xanthophylls as well as DHA for use in the food industry.     

Morphology and Mechanical Properties in Polymer Blends of Photocurable Polymer and Polycarbonate

Relationships between the morphologies and mechanical properties of binary blends of a photocurable polymer (2‐propenoic acid, (octahydro‐4,7‐methano‐1H‐indenediyl) bis(methylene)ester; DCA) and a linear polymer (poly(4,4′‐cyclohexylidene bisphenol carbonate); PCz) have been investigated. The blend films are prepared by in situ photopolymerization of homogeneous mixtures of a DCA‐monomer and PCz. The phase structure has been converted from a semi‐interpenetrating polymer networks (semi‐IPN) structure to a bicontinuous structure by controlling the cure temperature. Bicontinuous phase‐separated structures can be obtained by curing a wide range of compositions of 17–50 wt.‐% PCz at high temperatures. Miscible semi‐IPN structures are attained by means of photopolymerization below the glass transition temperature of the homogenous mixture before performing photoirradiation, such that magnetic relaxation measurements showed the blend to be miscible in the 10 nm order. The tensile strength and modulus reached a maximum in those blends having an intermediate vague phase structure between semi‐IPN and bicontinuous structures that have a strong interfacial interaction, which leads to incomplete phase decomposition in the PCz‐rich matrix phase. The maximum strength and modulus prepared under optimum condition are inferior to those of the individual components. In contrast, the elongation and break energy are greatly improved in those blends with bicontinuous structures having a diffused phase boundary.

DCA‐rich domain size in bicontinuous structure for DCA/PCz system, as a function of cure temperature; (□) 17 wt.‐% PCz, (○) 30 wt.‐% PCz, and (?) 50 wt.‐% PCz.     

Melatonin-Based Therapeutics for Neuroprotection in Stroke

The present review paper supports the approach to deliver melatonin and to target melatonin receptors for neuroprotection in stroke. We discuss laboratory evidence demonstrating neuroprotective effects of exogenous melatonin treatment and transplantation of melatonin-secreting cells in stroke. In addition, we describe a novel mechanism of action underlying the therapeutic benefits of stem cell therapy in stroke, implicating the role of melatonin receptors. As we envision the clinical entry of melatonin-based therapeutics, we discuss translational experiments that warrant consideration to reveal an optimal melatonin treatment strategy that is safe and effective for human application.     

Resistance Degradation in Y(Cr,Mn)O3–Y2O3 Composite NTC Ceramics in Hostile Environments

A series of composite, negative temperature coefficient (NTC) ceramics were carefully processed with compositions based on the Y(Cr,Mn)O₃+Y₂O₃ system and these were investigated for resistance stability in hostile environments. This specific system is of interest for high-temperature automobile thermistors, however either through the processing or in use of these, materials can be exposed to reducing atmospheres at temperatures around 900°–1000°C. The thermochemical processes at intermediate temperatures and low     <10⁻¹⁰atm can influence the resistance of the given ceramics. Through an impedance analysis it is determined that the resistance increase is associated primarily with a grain boundary resistance increase. The grain and grain boundary elements are modeled through parallel constant phase element and resistance equivalent circuits connected in series. Possible origins of the defect chemistry being controlled through high-temperature processes at the sintering are partial Schottky reactions that are compensated through a superoxidation reaction on cooling and aging. The reduction process reversed the superoxidation reaction and transited the grain boundary surfaces to ionically compensated B-site vacancies with oxygen vacancies.     

Oxidative coupling polymerization of racemic 3,3’-dihydroxy-2,2’-dimethoxy-1,1’-binaphthalene with copper(II)-(-)-sparteine complex

Summary The oxidative coupling polymerization of racemic 3,3’-dihydroxy-2,2’-dimethoxy-1,1’-binaphthalene with copper(II) chloride-(-)-sparteine [(-)Sp] in methanol at room temperature was carried out and the enantiomer-selectivity during the polymerization was examined. The (R)-monomer preferentially reacted, and the purity of the unreacted monomer reached 80%ee (S) after 15 h, while that of the polymerized monomer gradually decreased from 26%ee (R) as a function of the polymerization. The ratio of the rate constants of both enantiomers, s=k_R/k_S, was determined to be 2.3. The model coupling reaction of the mono-benzylated (R)-monomer with CuCl₂-(-)Sp showed that the R-configuration with respect to the carbon-carbon bonds between the monomer units was selectively constructed during the polymerization.     

Efficient and precise cutting of zirconia ceramics using heated cutting tool

The thermally assisted machining of yttria-stabilized tetragonal zirconia polycrystal using a cutting tool heated with induction heating was proposed. Although the conventional thermally assisted machining cannot be applied to drilling, the proposed method can be. Heat transfer from the heated cutting tool to the workpiece was simulated analytically, and the result showed that heating of the tool up to 500 °C produced an increase of 150–400 °C in the workpiece temperature. Cutting experiments demonstrated an improvement in machinability.     

Development Of Cvt Control System And Its Use For Fuel‐Efficient Operation Of Engine

Continuously variable transmission (CVT) provides an automobile with the ability to change the gear ratio continuously, which can then improve not only ride quality such as acceleration performance but also fuel‐efficiency. However, to take advantage of the ability, a control system that can precisely control the gear ratio is required. This paper proposes such a control system for a belt‐driven CVT system. For controller design, first the CVT system is modeled by analytical and experimental approaches. The resultant static and dynamic characteristics provide a nonlinear first‐order model with an uncertain time constant and time delay. The nonlinear steady‐state gain is adjusted to one by a gain‐scheduled pre‐compensator. Thereby the plant model becomes a linear first‐order lag system with a dead time. The next step is controller design using the plant model. To guarantee stability and control performance against the parameter variation and time delay, the μ‐synthesis, a robust control method, is employed for feedback control. In addition, a feedforward controller is incorporated into the feedback control system to obtain better output response. The feedforward controller is given by a combination of the inverse system of the plant and a reference model that gives desired output response. As a result, the control system becomes a two‐degree‐of‐freedom control system. To evaluate the performance of the control system and its effectiveness on the fuel‐efficiency, computer simulation and driving tests were conducted. The simulation and experiment results prove that the proposed control system can make the gear ratio track a reference output quickly and precisely in the presence of the uncertainties. The results also show that the control system improves fuel‐efficiency by changing the gear ratio so that the engine torque and its revolution speed can satisfy optimum‐efficiency operating condition.     

Development of new dosimetry using extended DNA fibers

We applied fluorescent microscopy to monitor the damage of DNA upon exposure to gamma radiation. Our developed dosimetry demonstrated that the number of breaks in DNA is proportional to the dose of the irradiation but is not dependent on dose rate of the irradiation and the GC content of DNA.