High pressure differential thermal analysis (HPDTA) of fatty acid methyl esters and triglycerides

When using high pressure differential thermal analysis to study the stability of a fatty methyl ester or triglyceride in an atmosphere of air, a departure from the base line in the exothermic curve is observed. The point where an extension line from the base line intersects a tangent line to the departure curve was selected as the transition point in the exothermic curve. For each sample studied, temperature at this transition point showed good reproducibility. The influence of sample container and air pressure upon the temperature of the transition point in the exothermic curve (TTE) was examined. A linear correlation between the number of double bonds in the sample and TTE was observed.     

Synovial osteochondromatosis of the temporo-mandibular joint

A rare case of synovial osteochondromatosis of the temporo-mandibular joint is presented. Important diagnostic information can be obtained by CT, MRI, 99m Tc bone scan and aspiration biopsy. Observation using a light microscope showed mild cellular atypia, but the hallmarks characteristic of chondrosarcoma were not found. Observation using an electron microscope showed the mature chondrocytes contained a well-developed rough endoplasmic reticulum. Histological evaluation indicated that the present case was benign synovial osteochondromatosis in an early stage.     

Enrichment of CLA isomers by selective esterification with l-menthol using Candida rugosa lipase

Commercially available preparations of CLA are composed of almost equal amounts of 9-cis,11-trans (9c,11t)-CLA and 10-trans,12-cis (10t,12c)-CLA. Each isomer was fractionated and enriched, for availability as a food supplement, by a process comprising selective esterification with l-menthol by Candida rugosa lipase, distillation, and n-hexane extraction. The first selective esterification of CLA isomers was conducted with an equimolar amount of l-menthol of 30°C. The oil phase of the reaction mixture was fractionated into an l-menthyl ester fraction (9c,11t-CLA rich) and an FFA fraction (10t,12c-CLA rich) by distillation. The FFA fraction was esterified again with an equimolar amount of l-menthol to enrich 10t,12c-CLA. The 10t,12c-CLA preparation was obtained as the resulting FFA fraction by distillation. 10t,12c-CLA was enriched to 91% with 40% recovery. To enrich 9c,11t-CLA, the l-menthyl ester fraction in the first esterification was chemically hydrolyzed, and the resulting FFA were esterified again with an equimolar amount of l-menthol. The 9c, 11t-CLA preparation was obtained by chemical hydrolysis of the resulting l-methyl ester fraction, followed by n-hexane extraction. 9c,11t-CLA was enriched to 94% with 42% recovery. This effective process for purification of CLA isomers using l-methol is applicable to the production of food supplements.     

Resistance Degradation in Y(Cr,Mn)O3–Y2O3 Composite NTC Ceramics in Hostile Environments

A series of composite, negative temperature coefficient (NTC) ceramics were carefully processed with compositions based on the Y(Cr,Mn)O₃+Y₂O₃ system and these were investigated for resistance stability in hostile environments. This specific system is of interest for high-temperature automobile thermistors, however either through the processing or in use of these, materials can be exposed to reducing atmospheres at temperatures around 900°–1000°C. The thermochemical processes at intermediate temperatures and low     <10⁻¹⁰atm can influence the resistance of the given ceramics. Through an impedance analysis it is determined that the resistance increase is associated primarily with a grain boundary resistance increase. The grain and grain boundary elements are modeled through parallel constant phase element and resistance equivalent circuits connected in series. Possible origins of the defect chemistry being controlled through high-temperature processes at the sintering are partial Schottky reactions that are compensated through a superoxidation reaction on cooling and aging. The reduction process reversed the superoxidation reaction and transited the grain boundary surfaces to ionically compensated B-site vacancies with oxygen vacancies.     

Basic study of aerial flashover characteristics generated from pore of insulating solid

This paper reports a study on the possibility of an aerial flashover between a coil conductor and a casing in rotating machines under the application of a lower voltage than Paschen's voltage, even when enough insulation distance is secured. The time lag to aerial flashover originating from surface flashover was measured. To understand the aerial flashover influenced by the parameters of the voltage application circuit, the aerial flashover distance was measured using a cable which had a simulated pore to confirm the above issue. The surface flashover characteristic was also measured using a photomultiplier tube (PMT). It became clear that aerial flashover occurred a few milliseconds after surface flashover generation. After showing the peak, the aerial flashover distance decreased with increasing time constant. The surface flashover time estimated by the PMT output exhibited different values with change of capacitance when the time constant is larger. On the other hand, the average surface flashover current was almost the same in spite of the change of capacitance. From these results, it was concluded that the aerial flashover distance was influenced by the time constant of the circuit. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(3): 9–17, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21295     

Sample preparation of GaN-based materials on a sapphire substrate for STEM analysis

In this work, a detailed TEM sample preparation recipe based on a wedge polishing technique for GaN-based materials is presented. The obtained samples have atomically flat surfaces without any obvious surface damages such as the formation of amorphous layers. A composition estimation of Al(x)Ga(1-x)N from Z-contrast STEM imaging is carried out using these samples. The results are in good accord with the nominal composition.     

Video Scene Annotation Based on Web Social Activities

This article describes a mechanism to acquire the semantics of video content from the activities of Web communities that use a bulletin-board system and weblog tools to discuss video scenes.     

Use of mild-heat treatment following high-pressure processing to prevent recovery of pressure-injured Listeria monocytogenes in milk

This study examined the inactivation of Listeria monocytogenes in milk by high-pressure processing (HPP) and bacterial recovery during storage after HPP. We developed a technique to inhibit the bacterial recovery during storage after HPP (550 MPa for 5 min) using a mild-heat treatment (30-50 degrees C). Various mild-heat treatments were conducted following HPP to investigate the condition on which the bacterial recovery was prevented. Immediately after HPP of 550 MPa at 25 degrees C for 5 min, no L. monocytogenes cells were detected in milk regardless of the inoculum levels (3, 5, and 7 log(10)CFU/ml). However, the number of L. monocytogenes cells increased by >8 log(10)CFU/ml regardless of the inoculum levels after 28 days of storage at 4 degrees C. Significant recovery was observed during storage at 25 degrees C; the bacterial number increased by >8 log(10)CFU/ml after 3 days of storage in the case of an initial inoculum level of 7 and 5 log(10)CFU/ml. Even in the case of an initial inoculum level of 3 log(10)CFU/ml, the bacterial number reached the level of 8 log(10)CFU/ml after 7 days of storage. No bacterial recovery was observed with storage at 37 degrees C for 28 days. Milk samples were treated by various mild-heat treatments (30-50 degrees C for 5-240 min) following HPP of 550 MPa at 25 degrees C for 5 min, and then stored at 25 degrees C for 70 days. The mild-heat treatment (e.g., 37 degrees C for 240 min or 50 degrees C for 10 min) inhibited the recovery of L. monocytogenes in milk after HPP. No recovery of L. monocytogenes in milk was observed during 70-day storage at 25 degrees C in samples that received mild-heat treatments such as mentioned above following HPP (550 MPa for 5 min). Moreover, the mild-heat treatment conditions (temperature and holding time) required to inhibit the recovery of L. monocytogenes in milk was modelled using a logistic regression procedure. The predicted interface of recovery/no recovery can be used to calculate the mild-heat treatment condition to control bacterial recovery during storage at 25 degrees C after HPP (550 MPa for 5 min). The results in this study would contribute to enhance the safety of high-pressure-processed milk.     

ADAPTIVE LEARNING CONTROL OF CUTTING PARAMETERS FOR SCULPTURED SURFACE CUTTING BASED ON GENETIC ALGORITHMS AND NEURAL NETWORK

An adaptive learning control scheme intended to the on-line optimization of sculptured surface cutting process is presented. The scheme uses a back-propagation neural network to learn the relationships between process inputs and process states. The cutting parameters of the process model are optimized through a genetic algorithms(GA). The capacity of the proposed scheme for determining optimum process inputs under a variety of process conditions and optimization strategies is evaluated on the basis of milling of a sculptured surface using a ball-end mill. The experimental results show that the neural network could model the cutting process efficiently, and the cutting conditions such as spindle speed could be regulated for achieving high efficiency and high quality. Therefore the proposed approach can be well applied to the manufacturing of dies and molds.     

Measurement of axial neutral density profiles in a microwave discharge ion thruster by laser absorption spectroscopy with optical fiber probes

In order to reveal the physical processes taking place within the "μ10" microwave discharge ion thruster, internal plasma diagnosis is indispensable. However, the ability of metallic probes to access microwave plasmas biased at a high voltage is limited from the standpoints of the disturbance created in the electric field and electrical isolation. In this study, the axial density profiles of excited neutral xenon were successfully measured under ion beam acceleration by using a novel laser absorption spectroscopy system. The target of the measurement was metastable Xe I 5p(5)((2)P(0) (3/2))6s[3/2](0) (2) which absorbed a wavelength of 823.16 nm. Signals from laser absorption spectroscopy that swept a single-mode optical fiber probe along the line of sight were differentiated and converted into axial number densities of the metastable neutral particles in the plasma source. These measurements revealed a 10(18) m(-3) order of metastable neutral particles situated in the waveguide, which caused two different modes during the operation of the μ10 thruster. This paper reports a novel spectroscopic measurement system with axial resolution for microwave plasma sources utilizing optical fiber probes.