Measurement of Rising R-Curve Behavior in Toughened Silicon Nitride by Stable Crack Propagation in Bending

A simple procedure for measuring the R -curve properties of ceramics by a stable fracture test in three-point bending is described. As a typical case, data are displayed for a Si₃N₄ material toughened by the presence of acicular grains in situ grown during the sintering process. The fracture mechanics specimen was a single-edge double-notched beam (SEDNB), whose notch was sharpened to a radius of <10 μm in order to reduce the amount of elastic energy stored at its root prior to crack extension. Furthermore, a stabilizer, specially designed for the bending geometry, was used to control crack stability. During stable extension, the crack could be easily arrested at selected locations of the load-displacement curve, the load quickly released, and the stable crack extension directly measured by the die-penetration technique. The crack resistance, K _R, of the material was calculated from the measured crack extent and the onset load value before unloading. This method enabled us to precisely monitor the critical load value at which the load-displacement curve deviated from linear behavior, as well as crack extensions from a few tens of micrometers to about 1 mm. As an application of this method, the fracture resistance of a Si₃N₄ material with rising R -curve behavior was measured and found to increase from about 5.5 to 9.0 MPaμm^1/2 within a 0.8-mm extension.     

Isolation of flat revertants from human papillomavirus type 18 E6E7 transformed 3Y1 cells by transfection with a rat embryo fibroblast cDNA expression library

A rat embryo fibroblast (REF) cDNA expression library was transfected into 3Y1 cells transformed by human papillomavirus type 18 E6 and E7 genes and 10 flat revertants were isolated. These revertants expressed the same levels of E6 and E7 mRNA as the parent cells, but had greatly reduced ability to form colonies in soft agar. Suppression of transformation was dominant in cell hybrids generated by fusing each revertant with the parental transformed cells. Furthermore, loss of transfected cDNA was observed in re-transformed cell hybrids derived from one flat revertant. Overexpression of the cDNA suppresses the colony-forming efficiency of the cells transformed by E6 and E7 genes.     

Properties of liposomal membranes containing lysolecithin

The diffusion of glucose from phospholipid membranes has been measured in the presence of serum albumin or methylated serum albumin. At neutral pH, serum albumin enhanced the rate at which glucose diffused from liposomes containing more than a certain amount of lysolecithin. Net charge of the membrane is not important for the reaction, since positively charged membranes containing stearylamine showed almost the same reactivity as negatively charged liposomes containing dicetyl phosphate. Carboxylmethylated albumin showed enhancement of the diffusion rate of glucose from negatively but not from positively charged liposomes. The amount of methylated albumin required to affect liposomes was much smaller than the amount of albumin required to damage liposomes containing lysolecithin. Cholesterol incorporation suppressed the sensitivity of liposomes to both proteins, albumin and methylated albumin. The effect of temperature and fatty acid composition of phospholipids on the sensitivity of liposomes to proteins suggests the importance of the fluidity of the membrane, especially in the case of methylated albumin.     

Improvement in physical properties of poly(vinyl chloride) by radiation-induced graft copolymerization with mixed monomers

Gamma-ray-induced graft copolymerization of butadiene with vinyl monomers onto PVC was attempted to improve the physical properties of PVC. The Izod impact strength was increased from 2 kg·cm/cm² to more than 100 kg·cm/cm² by grafting ca. 10% butadiene. But the tensile strength and melt flow were decreased by the grafting. The electron micrograph showed that the mass of polybutadiene in the graft copolymer had a convenient diameter (0.1–1 μ) for absorbing the impact energy. The weatherability of PVC grafted with butadiene was improved by cografting of butadiene with acrylates and methacrylates which had long side chains.     

Low Temperature Phase Transition in C70 and Solvation Effects

The heat capacity of C₇₀ has been measured by adiabatic calorimetry between 14 and 320 K. The orientational phase transition is observed as a broad hump in the heat capacity curve, which is strongly influenced by small amount of solvent remaining in the sample.     

Cellulose/syndiotactic polypropylene composites: Effects of maleated polypropylene as a compatibilizer and silanized cellulose on the morphology and tensile properties

To improve the interaction between syndiotactic polypropylene (SPP) and fibrous cellulose (FC), the effects of the addition of maleated polypropylene (MAPP) and FC surface modification with 3‐aminopropyltriethoxysilane (APTES) on SPP/FC composites were studied with respect to the morphology and the tensile properties. The addition of MAPP brought about an improvement in the interfacial adhesion between SPP and FC according to scanning electron microscopy observations and tensile testing. This improvement was, however, less effective than the improvement in the interfacial adhesion between isotactic polypropylene (IPP) and FC. SPP and MAPP partially or microscopically phase‐separated because of the IPP‐like polymer chain structure of MAPP. With respect to the compatibility between SPP and FC, FC surface modification with APTES was more suitable. The increase in Young's modulus was remarkable in the SPP/silanized FC composite with APTES. The tensile strength of the SPP/silanized FC composite with APTES was, however, considerably lower than that of the SPP/FC/MAPP composite. These results suggest that interfacial improvement between SPP and FC requires a compatibilizer or a surface modifier with a suitable primary structure. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Mechanical properties of silane‐treated,silica‐particle‐filled polyisoprene rubber composites: Effects of the loading amount and alkoxy group numbers of a silane coupling agent containing mercapto groups

The surface treatment of spherical silica particles with a silane coupling agent with mercapto groups was carried out. The treated silica particles were incorporated within polyisoprene and then vulcanized. The effects of the loading amount and alkoxy group number of silane on the stress–strain curve of the filled composite were investigated. For this purpose, silanes with dialkoxy and trialkoxy structures were used. The loading amount of silane on the silica surface was varied from 1 to 8 times the amount required for monolayer coverage. The stress at the same strain increased with the silane treatment, and it was higher in the dialkoxy structure than in the trialkoxy structure above 300% strain. There was no significant influence of the loading amount on the stress for the trialkoxy silane structure. However, the stress was influenced by the loading amount, and the maximum stress was observed at 4 times the silane amount required for monolayer coverage for the dialkoxy structure. The stress had a good relationship with the crosslinking density of silica‐filled polyisoprene rubber (measured with a swelling test). The reinforcement effect by the silane treatment of silica was found to be affected strongly both by the entanglement of the silane chain and polyisoprene rubber matrix and by the crosslinking reaction between the mercapto group of silane and polyisoprene rubber in the interfacial region. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Liquid water breakthrough pressure through gas diffusion layer of proton exchange membrane fuel cell

The dynamic behavior of liquid water transport through the gas diffusion layer (GDL) of the proton exchange membrane fuel cell is studied with an ex-situ approach. The liquid water breakthrough pressure is measured in the region between the capillary fingering and the stable displacement on the drainage phase diagram. The variables studied are GDL thickness, PTFE/Nafion content within the GDL, GDL compression, the inclusion of a micro-porous layer (MPL), and different water flow rates through the GDL. The liquid water breakthrough pressure is observed to increase with GDL thickness, GDL compression, and inclusion of the MPL. Furthermore, it has been observed that applying some amount of PTFE to an untreated GDL increases the breakthrough pressure but increasing the amount of PTFE content within the GDL shows minimal impact on the breakthrough pressure. For instance, the mean breakthrough pressures that have been measured for TGP-060 and for untreated (0 wt.% PTFE), 10 wt.% PTFE, and 27 wt.% PTFE were 3589 Pa, 5108 Pa, and 5284 Pa, respectively.     

Degradative capacities and bioaugmentation potential of an anaerobic benzene-degrading bacterium strain DN11

Azoarcus sp. strain DN11 is a denitrifying bacterium capable of benzene degradation under anaerobic conditions. The present study evaluated strain DN11 for its application to bioaugmentation of benzene-contaminated underground aquifers. Strain DN11 could grow on benzene, toluene, m-xylene, and benzoate as the sole carbon and energy sources under nitrate-reducing conditions, although o- and p-xylenes were transformed in the presence of toluene. Phenol was not utilized under anaerobic conditions. Kinetic analysis of anaerobic benzene degradation estimated its apparent affinity and inhibition constants to be 0.82 and 11 microM, respectively. Benzene-contaminated groundwater taken from a former coal-distillation plant site was anaerobically incubated in laboratory bottles and supplemented with either inorganic nutrients (nitrogen, phosphorus, and nitrate) alone, or the nutrients plus strain DN11, showing that benzene was significantly degraded only when DN11 was introduced. Denaturing gradient gel electrophoresis of PCR-amplified 16S rRNA gene fragments, and quantitative PCR revealed that DN11 decreased after benzene was degraded. Following the decrease in DN11 16S rRNA gene fragments corresponding to bacteria related to Owenweeksia hongkongensis and Pelotomaculum isophthalicum, appeared as strong bands, suggesting possible metabolic interactions in anaerobic benzene degradation. Results suggest that DN11 is potentially useful for degrading benzene that contaminates underground aquifers at relatively low concentrations.