Characteristics of multistage column crystallizer for gas-liquid reactive crystallization of calcium carbonate

Crystallization of calcium carbonate using a gas (CO₂)-liquid (Ca(OH)₂) reaction was conducted using a three-stage column crystallizer. In this study, the staging effect of the multistage column crystallizer and the effect of the operating parameters on the particle size distribution were experimentally and theoretically investigated. From an economic viewpoint, the multistage column crystallizer has been developed to replace a cascade of MSMPR crystallizers, which requires a large installation area and high operating cost because some crystallizers are connected in a series. In the multistage column crystallizer, a narrower particle size distribution was obtained compared to that obtained in the standard column crystallizer. The theoretical approach to predict the particle size distribution is based on the population balance equation which takes account of the back flow into the crystallizer. The calculation results of particle size distribution fairly coincide with the experimental results, which indicates the particle size distribution in the multistage column crystallizer can be roughly predicted by this theoretical model.     

Arrhythmogenic right ventricular cardiomyopathy underlies syndrome of right bundle branch block, ST-segment elevation, and sudden death

In all experimental mammals tested (rats, dogs, primates), intramuscular injections of the oil-soluble antimalarial artemisinin derivatives artemether and arteether have produced an unusual pattern of selective damage to brain stem centers predominantly involved in auditory processing and vestibular reflexes. Artesunate, the most widely used of these compounds, is a water soluble hemisuccinate derivative given parenterally either by intravenous or intramuscular injection. The neurotoxic potential of parenteral artesunate and artemether was compared in a murine model. Adult Swiss albino mice were assigned randomly to 28-day regimens of intramuscular artemether or artesunate in doses ranging from 30 to 100 mg/kg/day. At 30 mg/kg/day, no abnormalities were detected with either drug. At 50 mg/kg/day, abnormalities were observed in six of 12 artemether recipients and two of 12 artesunate recipients. These were reversible in all but one (artemether) mouse. At 100 mg/kg/day, eight of 36 artemether recipients, two of 36 artesunate recipients, and one of 18 control mice died. All but four surviving mice in the artemether group (86%) showed obvious and usually irreversible abnormalities of balance and equilibrium, whereas only four artesunate recipients (11%) exhibited abnormalities, and these were reversible in each case (P < 0.001). At this dose the relative risk (95% confidence interval) for death or disability was 5.3 (2.6-11.2) for artemether recipients. Intramuscular artemether is significantly more neurotoxic than intramuscular artesunate in this murine model.     

Digalactosyldiacylglycerol suppression of inhibition by sulfoquinovosyldiacylglycerol of alpha-glucosidase

Digalactosyldiacylglycerol (DGDG) suppressed the inhibition by sulfoquinovosyldiacylglycerol (SQDG) of an alpha-glucosidase reaction. Suppressing was considered to be an apparent decrease in inhibitory activity of SQDG ascribed to direct interaction between SQDG and DGDG. This suppression was presumed to be caused by less access of SQDG to the enzyme because SQDG and DGDG formed mixed micelles.     

The indirect hemagglutination test for onchocerciasis performed with blood collected on filter paper

In Guatemala, an indirect hemagglutination (IHA) test for onchocerciasis, performed with a crude saline extract of Onchocerca volvulus and blood samples taken on filter paper, showed a high level of sensitivity and specificity. IHA titers of blood samples from the ear lobe taken on filter paper and of sera obtained by venipuncture showed a high correlation.     

Efficient construction of cDNA microarrays utilizing normalized cDNA libraries of Arabidopsis thaliana

We have demonstrated the utility of normalization for efficient cDNA microarray preparation using Arabidopsis as a model. Nonredundant cDNAs including 5722 species were efficiently collected from random 7914 expressed sequence tags (ESTs) in four normalized cDNA libraries. The prepared microarrays were successfully used to monitor gene expression. These methodologies should be applicable to the study of other species in plant biotechnology.     

Mask design compensation for sloped sidewall structures fabricated by X-ray lithography

We have investigated and report in this paper the factors influencing the deformation caused by the dependence between the absorbed X-ray energy on the resist and the shape of the absorber on the X-ray mask. Based on the measurement of errors that occurred during the transferring process between the 2-D shape of mask pattern and the resulting wall of the fabricated 3-D structure, we have developed newly useful graphical data on the absorbed X-ray energy, dosage, and shape of a microstructure. As a result, it is being reported as a method for compensation for the deformed shape after the fabrication of a quadruplets-microneedle. We have considered a number of factors affecting the deformation and finally realized that the effect of a dose–depth nonlinear curve is the most possible cause. Without the compensation of the mask design, we could observe the deformed shapes of the sloped sidewall on the exposed structures. Polymethylmethacrylate microneedle structures fabricated by X-ray lithography with an additional plane-pattern to cross-section transfers technique are directly influenced by the absorber on the X-ray mask pattern. The sidewall of the microneedle was improved by changing the mask pattern from a double right-triangular pattern to a double semi-circular pattern, modeled by comparing the results from a mask-pattern and the actual structure.     

Development of Fluorogenic Probes for Rapid High-Contrast Imaging of Transient Nuclear Localization of Sirtuin 3

Protein labeling using fluorogenic probes enables the facile visualization of proteins of interest. Herein, we report new fluorogenic probes consisting of a rationally designed coumarin ligand for the live-cell fluorogenic labeling of the photoactive yellow protein (PYP)-tag. On the basis of the photochemical mechanisms of coumarin and the probe–tag interactions, we introduced a hydroxy group into an environment-sensitive coumarin ligand to modulate its spectroscopic properties and increase the labeling reaction rate. The resulting probe had a higher labeling reaction rate constant and a greater fluorescence OFF–ON ratio than any previously developed PYP-tag labeling probe. The probe enabled the fluorogenic labeling of intracellular proteins within minutes. Furthermore, we used our probe to investigate the localization of sirtuin 3 (SIRT3), a mitochondrial deacetylase. Although the nuclear localization of SIRT3 has been controversial, this transient nuclear localization was clearly captured by the rapid, high-contrast imaging enabled by our probe.     

Rapid erasing of wettability patterns based on TiO2-PDMS composite films

TiO₂-polydimethylsiloxane (TiO₂-PDMS) composite films are prepared using the sol–gel method from a Ti(OBu)₄–benzoylacetone solution containing PDMS. The prepared films are cured by irradiation with ultraviolet (UV) light. Structural changes in the films after UV irradiation are confirmed by UV–vis absorption experiments, which show that an absorption band characteristic of the benzoylacetonate chelate rings disappears. This finding is ascribed to structural changes associated with the dissociation of the chelate rings. The IR spectra of the thin films exhibit a broad absorption band after UV irradiation, indicating that a Ti–O–Ti network forms in the thin film. Contact angles are measured for the TiO₂-PDMS thin films, showing wettability conversion from hydrophobic to superhydrophilic states by irradiation with oxygen plasma for 1 s. This phenomenon is explained by XPS experiments which reveal that the number of carbon atoms decreases, whereas the number of oxygen atoms increases on the surface of the TiO₂-PDMS composite films. Finally, hydrophobic–superhydrophilic patterns are fabricated based on a patterned TiO₂-PDMS composite film. The film displays a rapid change to superhydrophilicity over the whole film surface upon plasma irradiation for 1 s, which means that the wettability patterns are rapidly erasable.     

Optimization of magnet arrangement in double‐layer interior permanent‐magnet motors

The arrangement of permanent magnets in double‐layer interior permanent‐magnet motors is optimized for variable‐speed applications. First, the arrangement of magnets is decided by automatic optimization. Next, the superiority of the optimized motor is discussed by considering d‐ and q‐axis equivalent circuits that take into account the magnetic saturation of the rotor core. Finally, experimental veri?cation is carried out with a prototype motor. It is con?rmed that the maximum torque of the optimized motor under both low‐speed and high‐speed conditions is higher than that of conventional motors because of the relatively large q‐axis inductance and small d‐axis inductance. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 183(4): 54–63, 2013; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.22348     

Improved fracture toughness and fatigue life of carbon fiber reinforced epoxy composite due to incorporation of rubber nanoparticles

In this study, core–shell rubber (CSR) nanoparticles with approximate particle size of 35 nm were used as a modifier for the epoxy polymer. The effects of various CSR contents in the epoxy matrix on mode I interlaminar fracture toughness, tensile strength, and fatigue life of the carbon fabric reinforced epoxy (CF/EP) composites were investigated. The experimental results showed that the mode I interlaminar fracture toughness at crack initiation and propagation significantly improved by 71.21 and 58.47 %, respectively, when 8.0 wt% CSR was dispersed in the epoxy matrix. The fatigue life of the modified CF/EP composites at all of CSR contents dramatically increased 75–100 times longer than that of the unmodified CF/EP composites at high cycle fatigue while tensile strength slightly increased by about 10 %. Field emission scanning electron microcopy (FESEM) observations of the fracture surfaces were conducted to explain failure mechanisms of CSR addition to the CF/EP composites. The evidences of the rubber nanoparticle debonding, plastic void growth, and microshear banding were credited for delaying the onset of matrix crack, and reducing the crack growth rate, as a result, attributed to increase in the mechanical properties of the CF/EP composites.