3Cr2W8V钢锻件表面裂纹的成因及预防措施

通过对难变形钢3Cr2W8V进行实验,证明了合理地选择锻造工艺参数,也是解决表面裂纹的重要途径之一。     

高速钢变质处理和电磁搅拌的研究现状及展望

变质处理和电磁搅拌是改善钢铁材料组织和性能的重要手段，综述了在高速钢领域变质处理和电磁搅拌的研究现状和进展，表明采用这一工艺技术，将为生产较廉价的高性能铸造高碳高速钢轧辊提供途径，为此还提出今后研究的方向。     

航空发动机积炭清洗剂初探

本文简介了积炭的形成过程及其危害，国内外现有去炭工艺水平，重点分析了有机积炭清洗剂各成份的作用和影响，确定了工艺配方，并对其性能和使用情况作了测试。     

有限状态机在数控系统软件中的应用研究

在数控系统软件开发中，控制软件的开发是开发的关键。针对数控系统复杂性和实时性特点，把有限状态机应用在数控系统软件开发中，构造了控制器软件结构，并应用于数控系统的原型开发。     

Stage-efficiency of centrifugal extractor used in nuclear industry

1　INTRODUCTIONComparedwithamixer settlerorpulsedcolumnusedinthenuclearfuelreprocessingextraction pro cesses,ashort residence timecentrifugalextractorcatchesresearcher seyesbecauseofthe goodphaseseparationandasmallhold upvolume .Itshowsthefollowingadvantagesinthenuclearindustry[1] :1)Reducingsolventdegradationduetoradiation ;2 )Reducinginventoryofaqueousandorganicphases ,whichgivesrapidstart upandshut down ;3)Com pactdesignthatcontributestothereductionofplantcost .Manydifferenttypesofcen…     

韩国不锈无缝钢管工业考察

详细介绍了韩国三美（ＳＡＭＭＩ）钢公司的不锈无缝钢管生产设备及工艺。     

双组分高固体丙烯酸聚氨酯涂料的研究

介绍了改性高固体分羟基丙烯酸树脂的合成工艺，通过对引发剂、链转移剂、反应温度及叔碳酸缩水时油酯等因素的讨论，合成了新型的羟基丙烯酸树脂。以其为基料配制了丙烯酸聚氨酯涂料，并讨论了该磁漆的配方设计和各项性能。     

水煤浆厂生产现状与发展

总结了目前国内水煤浆生产厂的类型和规模,介绍了水煤浆产品的品种、质量特征以及水煤浆厂的生产技术经济指标,阐述了我国水煤浆厂生产的现状与发展趋势。     

Adaptive tracking control of leader–follower systems with unknown dynamics and partial measurements

In this paper, a decentralized adaptive tracking control is developed for a second-order leader–follower system with unknown dynamics and relative position measurements. Linearly parameterized models are used to describe the unknown dynamics of a self-active leader and all followers. A new distributed system is obtained by using the relative position and velocity measurements as the state variables. By only using the relative position measurements, a dynamic output–feedback tracking control together with decentralized adaptive laws is designed for each follower. At the same time, the stability of the tracking error system and the parameter convergence are analyzed with the help of a common Lyapunov function method. Some simulation results are presented to validate the proposed adaptive tracking control.     

A new core–shell type fluorinated acrylic and siliconated polyurethane hybrid emulsion

A novel core–shell type fluorinated acrylic and siliconated polyurethane (FSiPUA) hybrid emulsion was prepared by seeded emulsion polymerization using siliconated polyurethane (SiPU) as a seed and forming the structure with SiPU as a shell and the copolymer of butyl acrylate (BA) with 2,2,2-trifluoroethylmethacrylate (TFEMA) as a core. SiPU was synthesized using isophorone diisocyanate (IPDI), polytetramethylene ether glycol (PTMG), polypropylene glycol (PPG), dihydroxybutyl-terminated polydimethylsiloxane (PDMS), dimethylol propionic acid (DMPA), 1,6-hexanediol (HDO) and triethylamine (TEA). The contents of siloxane and fluorine were determined according to the feed ratio. Fourier transform infrared spectroscopy (FTIR) was used to identify the chain structure of SiPU and FSiPUA. Investigation of transmission electron microscopy (TEM) confirmed the core–shell structure of FSiPUA emulsion and gave the particle size at about 50 nm. The measurement results of water contact angles and the solvent absorptions in water and n-octane for cured films showed that the water and the oil repellency for FSiPUA had been improved significantly with a suitable content of fluorine and siloxane.