Experimental and numerical analysis of channel-length-dependent electrical properties in bottom-gate,bottom-contact organic thin-film transistors with Schottky contact

Channel length dependence of field-effect mobility and source/drain parasitic resistance in pentacene thin-film transistors with a bottom-gate, bottom-contact configuration was investigated. Schottky barrier effect such as nonlinear behaviors in transistor output characteristics appeared and became more prominent for shorter channel length less than 10 μm, raising some concerns for a simple utilization of conventional parameter extraction methods. Therefore the gate-voltage-dependent hole mobility and the source/drain parasitic resistance in the pentacene transistors were evaluated with the aid of device simulation accounting for Schottky contact with a thermionic field emission model. The hole mobility in the channel region shows smaller values with shorter channel length even after removing the influence of Schottky barrier, suggesting that some disordered semiconductor layers with low carrier mobility exist near the contact electrode. This experimental data analysis with the simulation enables us to discuss and understand in detail the operation mechanism of bottom-gate, bottom-contact transistors by considering properly each process of charge carrier injection, carrier flow near the contact region, and actual channel transport.     

Thermodynamics of antimony,arsenic, and tin in CaO—CaF2 melts

In view of the importance of tramp element contamination of steel products through a large volume of scrap consumption in the near future, the thermodynamic behaviour of Sb, As, Sn and Cu in CaO—CaF₂ melts under reducing conditions was studied by examining the dependences of distribution of each element between Cu, Ag or Sn alloys and CaO—CaF₂ melts on the CaO activity, oxygen partial pressure and temperature around 1 500°C. As a result, the reaction products on treatment by Ca compounds were demonstrated to be Ca₃Sb₂, Ca₃As₂, Ca₂Sn and CaCu. Experimentally obtained distributions were extrapolated to lower oxygen partial pressures less than 10^?18 atm to estimate the feasibility of removing those tramp elements from molten iron. It is thermodynamically indicated that if the prevailing oxygen partial pressure of the environment is below 10^?23 atm, these impurities, except Cu, would be substantially removed from molten steel.     

Aseismic evaluation for aging degradation of nuclear power plant components

The commercial operation of light water reactor plants in Japan already has a history of nearly 30 years. Since the beginning of the 1990s, studies have been conducted on aging degradation of nuclear power plants in Japan and abroad and, earlier in 1999, the domestic program of plant life management (PLM) was settled on. The program is based on the results of the PLM Study, which started in 1997. The purpose of the study was to develop the preventive maintenance program with an evaluation of aging degradation for maintaining the functions of plant component equipment. Taking account of the need for proper management of aging degradation, meanwhile, the technical evaluation of aseismic capability of aged plants is also considered to be important. Based on this concept, we evaluated the impact of assumed aging degradation on the aseismic capability of the plant facilities and structures covered by the PLM Study. In the aseismic evaluation, aging degradation modes selected in the PLM Study were divided into two categories—the one is including some degradation modes which impact on the aseismic capability of the facilities and structures should be taken into account, the other is including those whose impact might be ignored. Then the aging degradation modes composing the former one were quantitatively evaluated primarily based on the Technical Guidelines for Aseismic Design of Nuclear Power Plants (JEAG-4601) (NUREG/CR-6241, 1987). The result of the evaluation indicated that no aging degradation mode to be reflected in the maintenance program was extracted from the viewpoint of securing the aseismic capability of the plant components. However, establishment of rational evaluation methods for aging degradation, e.g. aseismic capability evaluation of thinned piping systems, was made a future technical subject.     

A decentralized control system for stabilizing multimachine power systems

A decentralized control system is studied for stabilizing multimachine power systems. A longitudinal power system with three areas, each having one machine, is considered in this study. A decentralized control design method is proposed, which is based on the optimal regulator theory. First a centralized control system is designed without any consideration on whether state variables are all available or not. Second a pseudo-decentralized control system is designed by omitting control gains corresponding to state variables which give hardly any effects on the power system stability. It is found that only one variable of phase angle of each machine is absolutely necessary for the pseudo-decentralized control system. This leads to an idea based on power system engineering, that is to say, new variables of tieline power flow are introduced in the decentralized control system design to substitute for the phase angle of each machine. Thus a decentralized control system for power system stability can be designed using the new variables of tieline power flow. It is demonstrated from simulation studies that the decentralized control system improves even longitudinal power system stability as well as the centralized control system.     

Enhanced protein synthesis in the ipsilateral substantia nigra following middle cerebral artery occlusion in the rat

The purpose of this randomised single blinded study was to determine the optimal size of laryngeal mask airway in the normal adult population, to test the validity of the current selection criteria and to determine if any externally measured anatomical variable correlated with optimal size. In each of 30 apnoeic anaesthetised adults weighting less than 100 kg, size 3, 4 and 5 laryngeal mask airways were inserted in random order by a skilled user and the cuff inflated to a standard pressure (60 cm H2O). Optimal size was based on four criteria in order of priority: number of attempts at placement, oropharyngeal leak pressure, fiberoptic score and percentage of vocal cords seen. The size 5 laryngeal mask airway was optimal in 19/30 and the size 4 in 11/30. In no patient was the size 3 the optimal fit. Oropharyngeal leak pressure was significantly higher for each progressively large size and the fiberoptic view was significantly better for the size 4 and size 5. There was no significant predictive value in any externally measured anatomical variable, but height was the most useful. The best current selection strategy was to choose a size 5 for males and size 4 for females. Potentially useful new strategies may be to use the size 5 in all adults, or a size 5 > or = 165 cm in height and size 4 for < 165 cm. We conclude that predicting the optimal size of laryngeal mask airway for individual adult patients is complex. The best size selection strategies involve use of the size 4 and 5 laryngeal mask airways in adults.     

Naturally occurring dual infection with human and bovine rotaviruses as suggested by the recovery of G1P8 and G1P5 rotaviruses from a single patient

Culture adaptation of rotaviruses from an infant with severe diarrhea in Cincinnati, Ohio, yielded not only a virus with the original RNA electropherotype (CJN) but also rotaviruses with other electropherotypes, the most dominant of which was called CJN-M [Ward RL, Knowlton DR, Schiff GM, Hoshino Y, Greenberg HB (1988) in J Virol 62: 1543-1549]. RNA-RNA hybridization and sequencing studies indicated that CJN was a typical G1P8 human rotavirus while CJN-M was a G1P5 strain and contained four gene segments (including segment 4) of a bovine rotavirus. Thus, the infant was apparently dually infected with human and bovine rotaviruses.     

Polymer structure formed in radiation-induced graft polymerization

Methacrylic acid (MAA) and methyl methacrylate (MMA) were grafted onto nylon 6, cellulose triacetate, cotton, viscose rayon, and polyester fibers, and the stereoregularities of the grafted polymers were determined. The graft polymerization was carried out with preirradiation techniques using γ-rays from a Co 60 source. The grafted copolymers were then separated from the homopolymers by Soxhlet extraction. The grafted (branch) polymers were isolated from the trunk polymers by acid hydrolysis and their stereoregularity was determined with a 100 MHz NMR spectrometer. The stereo-regularity of PMAA or PMMA grafted onto viscose rayon or cotton fiber was different from that of the polymers formed in ordinary radical polymerization.     

Photo-induced radicals in glucose and cellobiose

Photo-induced radicals in glucose and cellobiose, the model compounds of cellulose molecule, were studied by ESR spectrometry. Very poor formation of radicals in glucose as compared to those in cellobiose was observed. However, a spectrum showing a singlet line was easily produced by the use of light involving shorter wavelengths. It was estimated to be due to the radical formed at the reducing C₁ position of glucose molecule. By paper chromatography, the photo-irradiated cellobiose was confirmed to split into glucose through scission of glucosidic bonds in the molecule. The ESR spectrum of the acid-hydrolyzed cellulose similar to that of the unhydrolyzed sample was a seven-line spectrum, but the relative signal intensity was here markedly low. This phenomenon seems to be caused by the reduction of amorphous portion in the samples due to acid hydrolysis. It was concluded that the glucosidic bonds in cellobiose and cellulose molecules are very active toward light and play an important role in the radical formation in photo-irradiated samples.     

In-line type micropulse lidar with an annular beam: experiment

An in-line type compact micropulse lidar (MPL) with an annular beam was developed for low-altitude cloud measurement. An optical circulator and a couple of axicon prisms for an annular beam were installed on the lidar optics. The advantage of using the in-line MPL is its ability to obtain a near-range measurement with a narrow field of view of 0.1 mrad and to obtain a depolarization measurement of the orthogonally polarized echoes caused by ice crystals of a low-altitude cloud. The total insertion loss of the lidar optics was 3 dB. Detectors such as avalance photodiode detectors can be operated in an analog mode near the breakdown voltage because of the high isolation of the optical circulator. The ideal lidar echo variation from the nearest distance was verified by measuring the mountain echoes at various distances. The depolarization measurement of a low-altitude ice cloud was also demonstrated.