Thermomechanical behavior of Ti-Ni shape memory alloy films deposited by DC magnetron sputtering

In this study, thermomechanical properties of titanium-nickel (Ti-Ni) shape memory alloy (SMA) films are investigated in order to derive constitutive relations. Ti-Ni SMA films, deposited by DC magnetron sputtering under controlled film composition, are characterized by uniaxial tensile tests. At room temperature (R.T.), Ti-Ni films having Ti contents less than 50 at% exhibit superelastic behavior, and those having Ti contents greater than 50 at% exhibit shape memory behavior. However, the Ni—53.2 at% Ti film fractured at a tensile strain of 0.8% because of an increase in brittleness with increasing Ti content. At elevated temperatures, Ti-Ni films having Ti contents of 50.2 to 52.6 at% undergo phase change from martensite to austenite. The Young's modulus of the Ti-Ni films depends on temperature at each phase, regardless of film composition. Film composition does, however, affect the measured material constants b_A, b_M, c_A, and c_M. Stress-strain curves calculated from the constructed constitutive equation closely agree with those obtained from tensile tests, for both the martensite and austenite phases. The constitutive equations are expected to find great utility in the design of Ti-Ni film-actuated microelectromechanical systems (MEMS).     

Seismic proof test of a reinforced concrete containment vessel (RCCV): Part 2: Results of shaking table tests

A 1/8-scale model was constructed of a reinforced concrete containment vessel (RCCV) used in the latest advanced boiling water reactors (ABWR). Shaking table tests were conducted on it with input motions corresponding to or exceeding a design earthquake assumed for a real Nuclear Power Plant.The objectives of the tests were to verify the structural integrity and the leak-proof functional soundness of the RCCV subjected to design earthquakes, and to determine the ultimate strength and seismic margin by an excitation that led to the model's collapse. The model, the test sequence and the pressure and leak test results were addressed in Part 1. The shaking table test method, the input motions and the test results, including the transition of the model's stiffness, natural frequencies and damping factors and the effects of vertical input motions and internal pressure on the model's characteristics and behavior, the load–deformation, the ultimate strength, the failure mode of the reinforced concrete portion and the liner plate are described here. The seismic safety margin that was evaluated by the energy input during the failure test to a design basis earthquake will be described in Part 3. The analytical results of simulation using the multi-lumped mass model will be described in Part 4.     

Static Coarse Grain Task Scheduling with Cache Optimization Using OpenMP

Effective use of cache memory is getting more important with increasing gap between the processor speed and memory access speed. Also, use of multigrain parallelism is getting more important to improve effective performance beyond the limitation of loop iteration level parallelism. Considering these factors, this paper proposes a coarse grain task static scheduling scheme considering cache optimization. The proposed scheme schedules coarse grain tasks to threads so that shared data among coarse grain tasks can be passed via cache after task and data decomposition considering cache size at compile time. It is implemented on OSCAR Fortran multigrain parallelizing compiler and evaluated on Sun Ultra80 four-processor SMP workstation using Swim and Tomcatv from the SPEC fp 95. As the results, the proposed scheme gives us 4.56 times speedup for Swim and 2.37 times on 4 processors for Tomcatv respectively against the Sun Forte HPC Ver. 6 update 1 loop parallelizing compiler.     

High temperature superconductor micro-superconducting-quantum-interference-device magnetometer for magnetization measurement of a microscale magnet

We have developed a high temperature superconductor (HTS) micrometer-sized dc superconducting quantum interference device (SQUID) magnetometer for high field and high temperature operation. It was fabricated from YBa2Cu3O7-delta of 92 nm in thickness with photolithography techniques to have a hole of 4x9 microm2 and 2 microm wide grain boundary Josephson junctions. Combined with a three dimensional magnetic field coil system, the modulation patterns of critical current Ic were observed for three different field directions. They were successfully used to measure the magnetic properties of a molecular ferrimagnetic microcrystal (23x17x13 microm3), [Mn2(H2O)2(CH3COO)][W(CN)8]2H2O. The magnetization curve was obtained in magnetic field up to 0.12 T between 30 and 70 K. This is the first to measure the anisotropy of hysteresis curve in the field above 0.1 T with an accuracy of 10(-12) J T(-1) (10(-9) emu) with a HTS micro-SQUID magnetometer.     

Fabrication of Bulk β-FeSi2 Crystal With ThreeDimensional Alignment by an Oscillating Magnetic Field

It has been reported that an anisotropic magnetic field could produce the three-dimensional alignment of fine single-crystal particles with the orthorhombic crystal structure.However,the three-dimensional alignment was achieved only in suspensions.Fabrication of bulk"single"materials that have the three-dimensional alignment of grains has been desired.This study proposes a procedure for the fabrication,which consists of slip casting under an oscillating magnetic field and sintering.Optimization of casting and sintering conditions achieved the three-dimensionally aligned bulkβ-FeSi₂.     

Polyphenols Extracted from Black Tea (Camellia sinensis) Residue by Hot‐Compressed Water and Their Inhibitory Effect on Pancreatic Lipase in vitro

Abstract: Polyphenols, retained in black tea wastes following the commercial production of tea beverages, represent an underutilized resource. The purpose of this study was to investigate the potential use of hot‐compressed water (HCW) for the extraction of pancreatic lipase‐inhibiting polyphenols from black tea residues. Black tea residues were treated with HCW at 10 °C intervals, from 100 to 200 °C. The resulting extracts were analyzed using high‐performance liquid chromatography‐mass spectrometry and assayed to determine their inhibitory effect on pancreatic lipase activity in vitro. Four theaflavins (TF), 5 catechins, 2 quercetin glycosides, quinic acid, gallic acid, and caffeine were identified. The total polyphenol content of extracts increased with increasing temperature but lipase inhibitors (TF, theaflavin 3‐O‐gallate, theaflavin 3′‐O‐gallate, theaflavin 3,3′‐O‐gallate, epigallocatechin gallate, and epicatechin gallate) decreased over 150 °C. All extracts inhibited pancreatic lipase but extracts obtained at 100 to 140 °C showed the greatest lipase inhibition (IC₅₀s of 0.9 to 1.3 μg/mL), consistent with the optimal extraction of TFs and catechins except catechin by HCW between 130 and 150 °C. HCW can be used to extract pancreatic lipase‐inhibiting polyphenols from black tea waste. These extracts have potential uses, as dietary supplements and medications, for the prevention and treatment of obesity. Practical Application: Active forms of lipase inhibitors can be recovered from black tea residues. They could be used as dietary supplements or medications.     

Reduction of Vibration in Concentrated Winding Permanent Magnet Synchronous Motor by Means of Skew Effects of Rotor

Global warming and the problem of successfully incorporating environmental safeguards are promoting the need for a more power‐efficient motor. Therefore, as a driving source, permanent magnet synchronous motors (PMSMs) with concentrated winding are widely used in a variety of fields. However, a PMSM with a concentrated winding generates more vibration than one with a distributed winding because of the radial electromagnetic force. This paper describes the effect of a new skewed rotor on the characteristics of a concentrated winding PMSM. We investigated this effect by three‐dimensional finite element method (3D FEM) analysis and measurement. We also demonstrate that the proposed rotor is effective in reducing the radial electromagnetic force without decreasing motor efficiency. © 2014 Wiley Periodicals, Inc. Electr Eng Jpn, 187(2): 33–43, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22400     

MicroRNA-331-3p Suppresses Cervical Cancer Cell Proliferation and E6/E7 Expression by Targeting NRP2

Aberrant expression of microRNAs (miRNAs) is involved in the development and progression of various types of cancers. In this study, we investigated the role of miR-331-3p in cell proliferation and the expression of keratinocyte differentiation markers of uterine cervical cancer cells. Moreover, we evaluated whether neuropilin 2 (NRP2) are putative target molecules that regulate the human papillomavirus (HPV) related oncoproteins E6 and E7. Cell proliferation in the human cervical cancer cell lines SKG-II, HCS-2, and HeLa was assessed using the 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium, inner salt (MTS) assay. Cellular apoptosis was measured using the TdT-mediated dUTP nick end labeling (TUNEL) and Annexin V assays. Quantitative RT-PCR was used to measure the messenger RNA (mRNA) expression of the NRP2, E6, E7, p63, and involucrin (IVL) genes. A functional assay for cell growth was performed using cell cycle analyses. Overexpression of miR-331-3p inhibited cell proliferation, and induced G2/M phase arrest and apoptosis in SKG-II, HCS-2 and HeLa cells. The luciferase reporter assay of the NRP2 3′-untranslated region revealed the direct regulation of NRP2 by miR-331-3p. Gene expression analyses using quantitative RT-PCR in SKG-II, HCS-2, and HeLa cells overexpressing miR-331-3p or suppressing NRP2 revealed down-regulation of E6, E7, and p63 mRNA and up-regulation of IVL mRNA. Moreover, miR-331-3p overexpression was suppressed NRP2 expression in protein level. We showed that miR-331-3p and NRP2 were key effectors of cell proliferation by regulating the cell cycle, apoptosis. NRP-2 also regulates the expression of E6/E7 and keratinocyte differentiation markers. Our findings suggest that miR-331-3p has an important role in regulating cervical cancer cell proliferation, and that miR-331-3p may contribute to keratinocyte differentiation through NRP2 suppression. miR-331-3p and NRP2 may contribute to anti-cancer effects.