Analysis of a gyroscopic force measuring system in three-dimensional space

This paper concerns the development of an entirely new sensor for measuring forces using a gyroscope (called gyroscopic force measuring system, or simply GFMS) for measuring a force vectorially. In a previous paper [S. Kurosu, M. Adachi, K. Kamimura, Dynamical characteristics of gyroscopic weight measuring device, ASME J. Dynamic System Measurement, and Control 119 (1997) 346–350], the dynamics of the GFMS for measuring a vertical force were investigated and the principal characteristics were examined theoretically and experimentally. The results of this work are directly applicable to measurement of a vectorial force in three-dimensional space. The principle and the dynamical characteristics of the GFMS for measuring a force vector are analyzed theoretically. To measure a force vectorially, two auxiliary turntables (driven by servomechanisms) are installed around the gyroscope, in which turntable outputs are required to follow some angles of incidence of a force vector. Some unfavorable errors caused by various factors and disturbances are analyzed. Two types of compensation methods are proposed as a device both for accurate force measurement and disturbance suppression. The feasibility of the proposed GFMS is confirmed by numerical simulations.     

Detection of back-side pit on a ferrous plate by magnetic flux leakage method with analyzing magnetic field vector

We have developed a magnetic flux leakage (MFL) system using magnetic resistive (MR) sensors for detecting two dimensional magnetic field components, and an induction coil that generates low magnetic field strengths and extremely low frequencies. The signal at each scanned measurement point (i) was divided by the signal strength M_mes,i and phase α_i by a lock-in amplifier. Using the strength M_mes,i and phase α_i, we calculated the imaginary part of the signal using the common phase β. By optimization of the common phase β to the imaginary part, the analyzed scanning data curve was shown to be effective in estimating the size (depth and diameter) of back-side pits on a ferrous plate. Comparing the two dimensional magnetic field components of leakage, the imaginary part of the y-component parallel to the induced magnetic field was found to be suitable for detecting the back-side pits.     

Processing of ethanol fermentation broths by Candida krusei to separate bioethanol by pervaporation using silicone rubber‐coated silicalite membranes

BACKGROUND: Pervaporation employing ethanol‐permselective silicalite membranes as an alternative to distillation is a promising approach for refining low‐concentration bioethanol solutions. However, to make the separation process practicable, it is extremely important to avoid the problems caused by the adsorption of succinate on the membrane during the separation process. In this work, the pervaporation of an ethanol fermentation broth without succinate was investigated, as well as the influence of several fermentation broth nutrient components. RESULTS: Candida krusei IA‐1 produces an extremely low level of succinate. The decrease in permeate ethanol concentration through a silicone rubber‐coated silicalite membrane during the separation of low‐succinate C. krusei IA‐1 fermentation broth was significantly improved when compared with that obtained using Saccharomyces cerevisiae broth. By treating the fermentation broth with activated carbon, bioethanol was concentrated as efficiently as with binary mixtures of ethanol/water. The total flux was improved upto 56% of that obtained from the separation of binary mixtures, compared with 43% before the addition of activated carbon. Nutrients such as peptone, yeast extract and corn steep liquor had a negative effect on pervaporation, but this response was distinct from that caused by succinate. CONCLUSION: For consistent separation of bioethanol from C. krusei IA‐1 fermentation broth by pervaporation, it is useful to treat the low nutrient broth with activated carbon. To further improve pervaporation performance, it will be necessary to suppress the accumulation of glycerol. Copyright © 2009 Society of Chemical Industry     

Breeding habitats of Aedes aegypti (L) and Aedes. albopictus (Skuse) in villages of Barru, South Sulawesi, Indonesia

The breeding habitats of the dengue vector, Aedes aegypti and Aedes albopictus, were studied using larval collection method inside and outside houses in 6 villages of Barru, South Sulawesi, Indonesia from July 1994 to August 1995. Aedes aegypti was the dominant species, being abundant indoors especially in the coastal areas. Aedes albopictus was breeding primarily in outdoor containers in the hill and mountain areas. Earthen jar was the most common breeding habitat of Aedes aegypti in all villages surveyed. Drum can was the most common outdoor breeding habitat of Aedes albopictus in the hill and mountain areas. The high Breteau indices of Aedes aegypti and Aedes albopictus suggests that these species may play an important role in the transmission of dengue hemorrhagic fever in Barru where epidemics of the fever occur occasionally.     

A 144-Mb, eight-level NAND flash memory with optimized pulsewidthprogramming

We report a fast-programming, compact sense and latch (SL) circuit to realize an eight-level NAND flash memory. Fast programming is achieved by supplying optimized voltage and pulsewidth to the bit lines, according to the programming data. As a result, all data programming is completed almost simultaneously, and 0.67-MB/s program throughput, which is 1.7 times faster than conventional program throughput, is achieved. The compact layout of the SL circuit is made possible by four 3-bit latches sharing one unit of the read/verify control circuit. Using these techniques, we fabricated a 144-Mb, eight-level NAND flash memory using a 0.35-μm CMOS process, resulting in a 104.2-mm² die size and a 1.05-μm² effective cell size     

Enhancement of low density lipoprotein binding to both low density lipoprotein receptor-positive and- negative cells by tetracycline antibiotics

Some tetracycline (TC) antibiotics, including TC and anhydrotetracycline, have been found to enhance specific binding of low density lipoprotein (LDL) to both LDL receptor-positive and-negative cells at relatively higher concentrations. When incubated at 37°C, the ability of LDL receptor-negative human fibroblasts to bind ¹²⁵I-LDL was increased from<2 to 45 ng/mg by 170 μM TC. In normal human fibroblasts and Hep G2 cells, ¹²⁵I-LDL binding was elevated 1.4- to 2-fold by 113 μM TC. The ¹²⁵I-LDL binding in the presence of TC was diminished by both heparin and EDTA. The enhancement by TC was not observed when ¹²⁵I-LDL binding was assayed at 4°C. TC enhanced LDL binding to paraformaldehyde-fixed Hep G2 cells, excluding LDL receptor induction in the mechanism. These results demonstrated that TC enhanced cellular LDL binding through a process not involving functional LDL receptors.     

Group feature extraction based on matrix factorization from long-range office-logging data

To increase the productivity of knowledge workers, it is necessary to manage their organization so that they are motivated to collaborate with each other for their synergy. However, it is difficult for managers to grasp the explicit interactions of workers in the organization all the time. Owing to advanced communications technology, and the reduced size and improved capabilities of computers, we are able to record group behaviors as logging data in the office. The aim of this study is to extract features of group behavior from long-range office-logging data. We apply principal component analysis to the data matrix whose element is the mean travel velocity calculated from an individual’s trajectory per day. The results demonstrate the feasibility of our approach, since nontrivial informative group features can be extracted.     

Distributed Social Dilemma With Competitive Meta-players

In our research, we propose the solution to the 'Distributed Social Dilemma' as an extended social dilemma model. In this model, in order to prevent the players from becoming freeloaders, we introduce competitive meta-players. Our purpose is to evaluate, through agent-based simulation, how the meta-players effect to increase cooperation amongst players in a distributed social dilemma. In order to examine our proposed solution, we introduce the preference of the players to cooperate as the measure of the effect of the meta-players. On the basis of the result of the simulations, we show the degree of the effect of the competitive meta-players on the distribution social dilemma.     

Difference in the detection limits of flaws in the depths of multi-layered and continuous aluminum plates using low-frequency eddy current testing

We examined the difference in the detection limits of flaws in the depths of multi-layered and continuous aluminum plates using low-frequency eddy current testing. The detection limits were measured by using a magneto-resistive sensor. Comparing the frequency of an applied magnetic field, the detection limit at 50 Hz is deeper than that at 1 kHz. Comparing the sample structure, the detection limit in the multi-layered samples is deeper than that in the continuous samples. These results are likely due to the differences in the skin depth and conductivity of the sample.