This paper investigates the mutual grounding impedance between vertical grounding electrodes based on field measurements and FDTD simulations. In the case of vertical electrodes, the mutual impedance between the electrodes is almost completely independent of the electrode length, and thus the induced voltage is nearly constant as the electrode length becomes longer. This characteristic is different from that of an overhead conductor, where the electromagnetic‐induced voltage is proportional to the conductor length. The greater the separation distance between the electrodes, the smaller the induced voltage, as in the case of an overhead conductor. The propagation speed increases as the separation increases. It is found that the speed is not necessarily proportional to the inverse of the relative permittivity of the earth. 相似文献
To understand the adsorption properties of a styrene–divinylbenzene copolymer functionalized with N,N,N-trimethylglycine, AMP03, the adsorption behaviours for platinoid ions (Ru(III), Rh(III) and Pd(II)) were examined. Furthermore, we performed adsorption experiments using sample solutions by adding triethylamine, thiourea and N,N,N-trimethylglycine. Based on the adsorption data obtained in this study, we performed chromatographic experiments. The results indicated that all platinoid ions in the feed solution completely adsorbed on AMP03, and almost 80% of the adsorbed platinoid ions were recovered. These results show that AMP03 has the potential to recover Ru(III), Rh(III) and Pd(II) from high-level liquid waste. 相似文献
Ozonation and four types of advanced oxidation processes, including O3/H2O2, O3/UV, O3/H2O2/UV, and UV/H2O2, were evaluated for the treatment of contaminated groundwater at a Superfund site in Simpsonville, South Carolina using bench-scale, batch ozone and UV apparatuses. Although the contaminants of concern were 1,4-dioxane, 1,1-dichloroethene, and trichloroethene, several other chlorinated organics as well as tetrahydrofuran were found in the groundwater samples. The O3/H2O2 treatment with O3 and H2O2 doses of 6 and 1.5 mg/L, respectively, and the UV/H2O2 treatment with UV and H2O2 doses of 1,000 mJ/cm and 20 mg/L, respectively, were sufficient to degrade 200 µg/L of 1,4-dioxane, 110 µg/L of 1,1-dichloroethene, and 10 µg/L of trichloroethene below their performance standards of 10, 7, and 4 µg/L, respectively. Due to a high bromide concentration (0.35 mg/L) in the groundwater sample, bromate formation was found to be significant in ozone-based treatment, including O3/H2O2. 相似文献
We describe a nickel‐catalyzed Suzuki–Miyaura arylation of a tertiary iodocyclopropane with arylboronic acids; this is an efficient and convergent strategy for providing various enantioenriched arylcyclopropanes with a quaternary stereogenic center. This is the first metal‐catalyzed coupling between a tertiary alkyl electrophile and a wide range of aromatics, including heteroaromatics. We found that the outcome of the Ni‐catalyzed coupling with halides as electrophiles was dependent on the stability of the radical species formed during the reaction. The use of tert‐butyl alcohol (t‐BuOH) as the reaction solvent was very effective, because of its stability under the radical‐generating reaction conditions.
A series of sodium selenocarboxylates 2 were isolated from the reaction of diacyl selenides with sodium ethanolate and characterized. A convenient preparation of the sodium salts 2 by the direct reaction of acyl chlorides with sodium selenide was also established. The salts are colourless to slightly pale yellow crystals and labile towards moisture. They readily react with alkyl iodides at room temperature to give the corresponding Se-alkyl esters 3 . 相似文献
The (1?x)NaNbO3–(x)NaTaO3 solid solution was investigated for x ≤ 0.4 in terms of new high‐temperature and high‐permittivity dielectric system that is suitable for base metal inner electrode capacitor applications. The addition of Ta significantly enhanced the resistivity of the dielectric, resulting in superior resistivity than the dielectrics‐formulated BaTiO3 systems that dominate the multilayer ceramic capacitor dielectric devices. The voltage dependence of the permittivity was also superior to BaTiO3‐based materials, providing higher capacitance at higher temperatures. A transmission electron microscopy study illustrated that the grains had so‐called core‐shell structure. According to the electron diffraction analysis, the core region had an inhomogeneous structure between antiferroelectric and ferroelectric phases, and shell region had an incommensurate ferroelectric‐like structure. The core and shell region had Nb‐ and Ta‐rich composition, respectively, and their interface was compositionally sharp, implying that shell region was formed via a liquid phase during the sintering process with an incongruent Ta dissolution reprecipitation. We anticipate that these or similar materials based on the alkali‐niobate perovskites can be further enhanced to provide capacitor solutions from 150°C to 250°C, which is an important range for a number of new AC–DC invertor and engine control units. 相似文献