Chordomas of the skull base: dynamic MRI

OBJECTIVE: To investigate the role of dynamic MRI in the diagnosis of chordomas at the skull base. MATERIALS AND METHODS: Six patients with surgically proven chordomas of the skull base were examined with spin-echo technique (repetition time/echo time 200 ms/15 ms). Serial imaging was performed every 30 s for 240 s after a rapid injection of gadopenetate dimeglumine (0.1 mmol/kg). The contrast material enhancement ratio (CER) was analyzed. The CER was obtained for each region of interest as follows (Sn - So) x 100/Smax - So, where Sn indicates signal intensity at each dynamic phase; So, signal intensity on the image obtained before administration of contrast material; and Smax, maximum signal intensity of all dynamic imaging. RESULTS: All chordomas showed very slow but steady increase of contrast enhancement with no peak within 240 s. The CERs of six cases at 30 s are 13 to 40 (mean value +/- standard deviation: 22.8 +/- 10.2). CONCLUSION: Dynamic MRI may be helpful in differentiating between chordomas and other tumors of the skull base.     

A Knowledge-Based Software Process Simulation Model

In this paper we propose a new software development process simulation model. The model can predict variations of productivity based on dynamic changes in the developer's knowledge structure. An important concept of the model is that a developer's productivity is influenced by the developer's knowledge. Moreover, a developer can acquire new knowledge by executing activities of a project. In other words, the developer's knowledge structure changes during the project. The knowledge structure is defined using a cognitive map that consists of knowledge elements and prerequisite relationships among the knowledge elements. By adding the specific developer's knowledge and the specific project workload to the knowledge structure, an increment of the developer's knowledge and the project progress are calculated into the model. The simulation results are useful for making project plans including technical reviews, which are an efficient technique for acquiring new knowledge. The simulation model can predict what knowledge should be discussed in the technical review, when the review should be held, and who the members of the review should be. The simulation results help managers make the most appropriate and executable project plan.     

Cooperative behavior of various agents in dynamic environment

The multi-agent model is a model in which agents with limited ability cooperate each other to accomplish a goal. In this paper, we introduce a multi-agent model in which agents are created to imitate real ants. There are two different type of agents, each type of which has a particular task. We designed agents to communicate each other by using pheromone considering noise. On this model, we observed cooperative behavior of agents and evaluated conditions to make an order of behavior in the model.     

脉冲电流烧结机理的研究进展

脉冲电流烧结（Ｐｕｌｓｅ ｅｌｅｃｔｒｉｃ ｃｕｒｒｅｎｔ ｓｉｎｔｅｒｉｎｇ,ＰＥＣＳ）是材料科学领域开发出的一种新型快速烧结技术,已广泛应用于金属与合金、结构陶瓷、氧化物超导体、复合材料、热电材料、高分子材料以及功能梯度材料的制备．本文简介脉冲电流烧结特征,结合ＰＥＣＳ烧结条件对铜粉末和氧化铝粉体致密化及显微结构影响的实验证据,就脉冲电流烧结过程和机理进行探讨．     

Effect of the addition of NH4F on anodic behaviors of DSA-type electrodes in H2SO4-(NH4)2SO4 solutions

The effect of NH₄F addition on the high-anodic behaviors of various DSA-type electrodes was investigated in a mixture of sulfuric acid and ammonium sulfate. The pronounced effect of NH₄ addition was observed on DSA-type Ti/RuO₂, Ti/IrO₂?TiO₂ electrodes, but not observed on the other electrodes studied. The close relationship was found between the increment of the electrode potential caused by the NH₄ addition and the quantity of F^? adsorbed on the electrode surface. The effect of NH₄F addition was considered to be resulted from the adsorption of F^? on the electrode surface, and the presence of adsorbed F^? was directly proved.     

Dielectric study of β-relaxation in some cellulosic substances

6-(2-Cyanoethylamino)-6-deoxycellulose (Cell-CEA) as a novel cellulose derivative was prepared from 6-bromo-6-deoxycellulose. The influence of the reaction conditions on the degree of substitution was studied in detail. The dielectric characteristics of a Cell-CEA sample having degree of substitution of 0.86, together with those of microcrystalline and regenerated celluloses, have been investigated in the temperature range from −60 to 120°C, and frequency range 30 Hz to 100kHz. One relaxation process, designated as β, was recognised, which was attributed to side-group motions, probably −CH₂X (X = OH or NHCH₂CH₂CN). The higher activation energy of this process and the shift to higher temperature in Cell-CEA, compared with microcrystalline and regenerated celluloses, reflects the enhanced steric constraints involved in the motion of the bulkier, −CH₂NHCH₂CH₂CN, side groups. The results obtained are discussed in terms of the dielectric parameters ϵ″_max′ β and Δϵ.     

Two-stage pyrolysis of heavy oils. 3. Pyrolysis of tar-sand bitumens. Relation between ethylene yield and structural characteristics of heavy oils

Thermal cracking of tar-sand bitumens has been carried out using a two-stage pyrolysis reactor with temperature zones of 440°C and 750–800°C, respectively. Feedstocks were pyrolysed in the first stage into cracked oils, which were carried to the second stage for subsequent pyrolysis. Only 12–14 wt% of ethylene was obtained from tar-sand bitumens at the residence time of 1.2 s in the second stage, although 27 and 16 wt% were obtained from Taching and Iranian heavy vacuum residues, respectively. The tar-sand bitumens contain shorter paraffinic straight-chains and have more branched molecules than the vacuum residues of petroleum. A straight-chain paraffin index is proposed, with which a good correlation was obtained between ethylene yield and the fraction of straight-chain paraffin carbons in the heavy oil.     

Selective catalytic reduction of nitrogen oxides with hydrocarbons over Zn–Al–Ga complex oxides

Selective reduction of NO with hydrocarbons was studied using metal oxide catalysts having a spinel structure. A Zn–Al–Ga complex oxide was found to be very active and selective for the catalytic reduction of NO with both C₃H₆ and CH₄. It was revealed that the role of oxygen at the initial stage of the reaction strongly depends on the reductants; oxygen is mainly used for NO oxidation to NO₂ in the reduction with CH₄, whereas it is used both for NO oxidation to NO₂ and oxidation of C₃H₆ to an active intermediate in the reduction with C₃H₆. This revised version was published online in July 2006 with corrections to the Cover Date.     

Improvement of Pt/ZrO2 by CeO2 for high pressure CH4/CO2 reforming

CH₄/CO₂ reforming over Pt/ZrO₂, Pt/CeO₂ and Pt/ZrO₂ with CeO₂ was investigated at 2 MPa. Pt/ZrO₂, which shows stable activity under 0.1 MPa, and Pt/CeO₂ showed gradual deactivation with time at the high pressure. The deactivation was suppressed drastically on Pt/ZrO₂ with CeO₂ prepared by different impregnation order (co-impregnation of Pt and CeO₂ on ZrO₂, and consecutive impregnation of Pt and CeO₂ on ZrO₂). The amount of coke deposition was found insignificant and similar among all the catalysts (including Pt/ZrO₂ and Pt/CeO₂). Catalytic activity after the reaction for 24 h was in agreement with Pt particle size after the reaction for same period, indicating that the difference of the catalytic stability is mainly dependent on the extent of Pt aggregation through catalyst preparation, H₂ reduction, and the CH₄/CO₂ reforming. Pt aggregation and the amount of coke deposition were least pronounced on (Pt–Ce)/ZrO₂ prepared by impregnation of CeO₂ on Pt/ZrO₂ and the catalyst showed highest stability.