Tetra-Repeat Microsatellite Markers for the Masu Salmon (Oncorhynchus masou masou) and Its Application in Cross-Subspecies Amplification

We developed tetranucleotide-repeat microsatellite markers for the masu salmon (Oncorhynchus masou) complex. 454 pyrosequencing was used to discover repeat motifs, and seven polymorphic microsatellite-primer sets were identified. The number of alleles detected at each locus ranged from four to 24 and the expected heterozygosity varied from 0.57 to 0.92. Cross-subspecies amplification for O. m. masou, O. m. ishikawae and O. m. subsp. was successful. These microsatellites can be utilized in studies of genetic structure, genetic diversity, and intra- and inter-subspecific hybridization, making a contribution to conservation and management of the Oncorhynchus masou complex.     

Synthesis of porphyrin-end-functionalized poly(p-phenylene) as a leaf-green-colored soluble semiconducting polymer: Control of π–π interactions for visible-light absorption

The synthesis of tetraphenylporphyrin (H₂TPP)-end-functionalized poly(p-phenylene) (H₂TPP-PPP) as a leaf-green-colored soluble semiconducting polymer with a well-controlled and defined polymer chain structure was achieved for the first time. Chloromethyl-end-functionalized poly(1,3-cyclohexadiene) (CM-PCHD) was prepared by the living anionic polymerization of 1,3-cyclohexadiene and the post-polymerization reaction of poly(1,3-cyclohexadienyl)lithium and chloro(chloromethyl)dimethylsilane. H₂TPP-end-functionalized PCHD (H₂TPP-PCHD) was then prepared by the addition of 5-(4-hydroxyphenyl)-10,15,20-triphenylporphyrin to CM-PCHD. The dehydrogenation of H₂TPP-PCHD with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone was performed under ultrasonic irradiation, and H₂TPP-PPP was obtained as a target polymer in almost quantitative yield. The –Si(CH₃)₂–CH₂–O– bond in H₂TPP-PPP effectively inhibited the coordination of the H₂TPP end-group onto the PPP moiety, and the aggregation of H₂TPP-PPP with the accumulation of the H₂TPP end-group was formed. H₂TPP-PPP exhibited a leaf-green color and had a very broad absorption band overlapping the visible-light region, similar to chlorophyll a.     

Investigation of Ozone Concentration Measurement by Visible Photo Absorption Method

The measurement of ozone concentration based on the visible photo absorption method is investigated. An LED having an emission peak at 609 nm and a photo diode sensitive at visible light frequencies are used as the light source and the photo detector, respectively. The transmittance is measured as a function of ozone concentration, which is in reasonable agreement with the Beer–Lambert relationship. The effective absorption cross-section can therefore be estimated from the fitting procedure. The concentrations determined by both the UV and visible photo absorptions agree well with each other in the range from 7.1 to 68.4 g/m³(N). The relative error in these concentrations is discussed on the basis of the Twyman–Lothian curve. The ozone measurement for the air-fed ozone generation is also investigated. The effect of photo absorption due to NOx species is unavoidable. The present results provide useful data if the ozone measurement based on the visible photo absorption method is applied to ozone monitoring instruments or used for laboratory experiments.     

Novel CO2 Absorbents Using Lithium-Containing Oxide

We have discovered a series of lithium-containing oxides that immediately react with ambient carbon dioxide (CO₂) up to 700°C. The products react and return reversibly to the oxides at a temperatures higher than about 700°C. The absorption capacity surpasses that of other CO₂ absorbents by a factor of 10. Utilizing these absorbents, the possibility of a CO₂ separation system that operates at around 500°C is proposed. It is generally believed that a CO₂ separation process operable at temperatures higher than 500°C has the special benefit of a small energy penalty. Moreover, the absorption also proceeds at ambient temperature in the atmospheric environment. This property offers the possibility of many other applications, such as air cleaners or cartridges. Therefore, we think these materials have the potential to make a valuable contribution to the realization of CO₂ emission control.     

Fracture toughness evaluation of adjacent flow weld line in polystyrene by the SENB method

Fracture toughness of adjacent flow weld lines, defined as weld lines that occur when two flow fronts meet and continue to flow together in the same direction (meld line or hot weld line), was evaluated by the single‐edge notched‐bend (SENB) method using three differently‐shaped obstructive pins. Although the fracture toughness varied depending upon the shapes of the pin, the values could be standardized as the distance from the meeting point of the two flow fronts flowing around the pin. The fracture toughness decreased drastically from the meeting point along the weld line and then slightly increased. These characteristic features could be explained by flow‐induced molecular orientation at the weld line interface. The molecules around the meeting point that were initially oriented parallel to the weld line due to fountain flow were able to relax, and then entanglement across the weld line interface developed because the flow stopped in the middle of the filling process, resulting in high fracture toughness. In contrast, the material at the downstream side of the weld line continued flowing during the filling process, being stretched along the flow direction. So, the molecular orientation at this area could not relax. In addition, the V‐notch shape, i.e., the depth and length at the surface of the weld line, which also varied depending on the shape of the obstacles, was considered to be identical when the meeting point was allowed to be a datum point. Thus, the meeting point was found to be a significant factor when the properties of weld lines are investigated. POLYM. ENG. SCI., 45:1059–1066, 2005. © 2005 Society of Plastics Engineers     

Semi-indirect synthesis of LPG from syngas: Conversion of DME into LPG

Efficient conversion of dimethyl ether (DME) into liquefied petroleum gas (LPG) with a hybrid catalyst is a novel method for semi-indirect synthesis of LPG fuel from syngas. The hybrid catalysts consisting of zeolite and hydrogenation catalyst were investigated in a fixed bed reactor. Experimental results demonstrated that the hybrid catalyst consisting of (Pd/SiO₂) and USY efficiently converted DME into LPG and restrained decomposition of DME into CO and H₂. With that catalyst, the one through conversion of DME reached about 100%, almost no CO and CO₂ were produced and selectivity for LPG was more than 65%.     

Vibrationally Excited CO2 Formed in CO + NO Reaction on Pd(110) Surface in High Surface Temperature Range

The infrared chemiluminescence spectra of CO₂ formed during steady-state CO+NO reaction over Pd(110) indicated that the temperature of the bending vibrational mode was much higher than that of the antisymmetric one at higher surface temperatures such as 800–850 K. Especially, in the high temperature range, more vibrationally excited CO₂ was formed from CO+NO reaction than CO+O₂ reaction. On the basis of the result, we propose the model structure of reaction intermediates for CO₂ formation in CO+NO reaction, which is different from that in CO+O₂ reaction.     

Cerebral Hyperperfusion after Revascularization Inhibits Development of Cerebral Ischemic Lesions Due to Artery-to-Artery Emboli during Carotid Exposure in Endarterectomy for Patients with Preoperative Cerebral Hemodynamic Insufficiency: Revisiting the “Impaired Clearance of Emboli” Concept

The purpose of the present study was to determine whether cerebral hyperperfusion after revascularization inhibits development of cerebral ischemic lesions due to artery-to-artery emboli during exposure of the carotid arteries in carotid endarterectomy (CEA). In patients undergoing CEA for internal carotid artery stenosis (≥70%), cerebral blood flow (CBF) was measured using single-photon emission computed tomography (SPECT) before and immediately after CEA. Microembolic signals (MES) were identified using transcranial Doppler during carotid exposure. Diffusion-weighted magnetic resonance imaging (DWI) was performed within 24 h after surgery. Of 32 patients with a combination of reduced cerebrovascular reactivity to acetazolamide on preoperative brain perfusion SPECT and MES during carotid exposure, 14 (44%) showed cerebral hyperperfusion (defined as postoperative CBF increase ≥100% compared with preoperative values), and 16 (50%) developed DWI-characterized postoperative cerebral ischemic lesions. Postoperative cerebral hyperperfusion was significantly associated with the absence of DWI-characterized postoperative cerebral ischemic lesions (95% confidence interval, 0.001–0.179; p = 0.0009). These data suggest that cerebral hyperperfusion after revascularization inhibits development of cerebral ischemic lesions due to artery-to-artery emboli during carotid exposure in CEA, supporting the “impaired clearance of emboli” concept. Blood pressure elevation following carotid declamping would be effective when embolism not accompanied by cerebral hyperperfusion occurs during CEA.     

Switched capacitor circuit for 1/f noise generation using a power-law circuit

A simple switched capacitor (SC) circuit is given which realizes a one-dimensional discrete dynamical system X_n+1 = X_n + ux^z generating intermittent chaos with a 1/f-shaped power spectrum. an integrated circuit with a pair of logarithmic and antilogarithmic amplifiters can easily realize the power-law term x^z which plays a key role in generating l/fnoise. an inevitable small offset voltage ? in the SC circuit governs the cut-off frequency of 1/f noise, and when the dynamical system is modified by introducing an effective ?, the ‘indirect method’ enables us to get the precise power spectrum in the modified system.